• 대한소아치과학회지
• /
• 제30권2호
• /
• pp.204-209
• /
• 2003

9세된 남아가 불안정한 교합을 주소로 내원하였다. 환아의 제1대구치는 치아우식증으로 광범위하게 치관이 파괴되어 환아는 자신의 교두감합위를 찾지 못해 하악을 변위시키면서 교합을 하였고 폐구시마다 동일한 위치로 다물지를 못하였다. 임상검사와 방사선 검사를 통하여 제1대구치에 크라운 수복을 하여 안정적인 교합으로 교합재건을 해주기로 하였다. 치료에 앞서 안정위로 유도하여 환아에게 안정위로 폐구하도록 교육하였고, 근첨형성술(apexification)을 포함한 근관치료와 interocclusal space확보를 위한 치관연장술과 수직고경의 거상을 계획하였다. 근관치료와 치관연장술 후 보철물 제작을 위해 치아를 삭제하고 안정위를 기준으로 수직고경을 증가시켜 임시치관을 제작 및 장착하고 1개월 동안 적응여부를 관찰하였다. 1개월 후 악관절장애등의 증상이 없어 크라운을 제작하였고, 이를 다시 임시장착하고 1개월동안 관찰하여 아무런 증상이나 불편감이 없어 최종접착을 하였다. 크라운을 최종장착한지 4개월 후 검사에서 환아는 안정적인 교합을 형성해가고 있었고, 크라운을 처음 장착했을 때 보였던 전치부 개방교합도 개선되어 정상적인 수평, 수직피개 교합을 보이고 있었다.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.611-621
• /
• 2005

State of problem: Zirconia all-ceramic restoration fabricated with CAM system is on an increasing trend in dentistry. However, evaluation of the marginal and internal fits of zirconia bridge seldomly have been reported. Purpose: This study was to evaluate the at of margin and internal surface in posterior 3-unit zirconia bridge framework fabricated with CAM system(DeguDent, Germany). Material and Method: Preparations of secondary premolar and secondary molar on artificial resin model were performed for fabrication of 3-unit posterior bridge framework. Fits of 5 zirconia bridge framework were compared with 5 precious ceramo-metal alloy framework(V-GnathosPlus, Metalor, Switzerland), and prepared margins were designed to chamfer and shoulder finishing line. Each framework was cemented to epoxy resin model with reinforced glass ionomer(FujiCEM, GC Co., Japan), embedded in acrylic resin and sectioned in two planes, mesio-distal and buccolingual. Samples were divided into six pieces by sectioning and had two pieces of each surface(i.e mesial, distal, buccal and lingual surface) per abutment, so there were eight measuring points in each abutment. External gap was measured at the margin and internal gaps were measured at the margin, axial and occlusal surface. Gaps were observed under the measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of $\times100$. T-test were used to determine the statistic significance of the different gaps between zirconia and metal framework. Results and Conclusion: 1. External and internal marginal gaps of zirconia and metal framework were in clinically acceptable range. External marginal gaps were not different significantly between zirconia$(81.9{\mu}m)$ and metal $(81.3{\mu}m)$ framework and internal marginal gaps of zirconia $(44.6{\mu}m)$ were smaller than those of metal framework $(58.6{\mu}m)$. 2. Internal axial gaps of zirconia framework$(96.7{\mu}m)$ were larger than those of metal frame-work$(78.1{\mu}m)$ significantly and adversely, internal occlusal gaps of zirconia frame-work$(89.4{\mu}m)$ were smaller than those of metal framework $(104.9{\mu}m)$ significantly. 3. There were no significant differences in external and internal marginal gaps between chamfer and shoulder finish line when zirconia frameworks were fabricated.

• 대한소아치과학회지
• /
• 제26권4호
• /
• pp.636-643
• /
• 1999

유전적인 외배엽 이형성증에 의해 무치증 혹은 부분적 무치증을 가진 환아들은 치조골 발육의 부족으로 나타난 감소된 수직고경으로 인해 어린 나이에서 노인과 같은 안모를 가지게 된다. 이에 어린이들은 또래의 어린이들과 잘 어울릴 수 없게 되고 소외감과 정서적 위축감을 느끼게 된다. 수직고경을 고려한 보철적 치료를 통해 적절한 기능과 심미적인 개선을 이룰 수 있도록 도와주는 것이 치과의사의 중요한 역할이라 하겠다. 이에 저자는 경희대학교 치과대학 부속치과병원 소아치과에 내원한 부분적 무치증을 동반한 외배엽 이형성증을 가진 환아에서 치과치료를 통한 심미적, 기능적 결함을 개전하면서 다음과 같은 결론을 얻었기에 보고하는 바이다. 1. 맹출 영구치 위에 클래스프를 위치시켜 의치유지력에 도움을 주었으며 상하악 피개의치의 장착으로 교합고경을 회복하여 저작, 발음, 심미적인 개선이 이루어졌다. 2. 피개의치의 이용으로 교합평면의 설정과 의치의 유지와 안정을 도모하였고, 맹출한 치아를 보존하고 남아있는 치조골의 폭과 높이를 유지할 수 있었다. 3. 치료를 통해 환아는 외모에 자신감을 가지고 치과환경에 익숙해져 긍정적인 태도를 가지게 되었다. 4. 주기적인 내원을 통한 영구치 상태와 성장, 발육동안의 의치의 관찰로 의치의 이장, 재제작이 요구된다.

• 대한치과보철학회지
• /
• 제60권1호
• /
• pp.55-62
• /
• 2022

1933년 Meyer에 의해 처음 기술된 Functionally generated path (FGP) technique은 하악의 한계운동 내에서 대합치 교두에 의해 형성된 운동 경로를 구강 내에서 인기하는 방법이다. 이 방법을 이용하여 환자에게 적절한 교합 형태를 부여할 수 있는데 이 증례에서는 자연치열과 대합되는 상악 피개의치를 제작하여 균형 교합을 부여하였다. 또한 FGP technique으로 구치부 교합면을 정밀하게 형성하고 의치 치아의 마모를 감소시키기 위해 통상적으로 사용하는 기성 레진 인공치가 아닌 지르코니아 의치 치아를 개별 제작하였다. 이러한 재료와 방법으로 치료 후 술자와 환자 모두 만족스러운 결과를 얻었기에 본 증례를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.54-63
• /
• 2024

장기간 사용된 임플란트 피개의치는 부착장치의 마모와 전치부 교합집중, 인공치 파절, 의치의 회전 등을 보일 수 있다. 이러한 문제점은 추가적인 임플란트 식립을 이용한 임플란트보조 국소의치(IARPD, implant assisted removable partial denture)로의 전환으로 개선할 수 있다. 본 증례는 임플란트 피개의치를 사용하는 3급 악간관계 환자에서 전치부에 집중된 교합을 분산하고 의치의 회전방지를 위해 서베이드 크라운을 이용한 IARPD으로 전환하였다. 여러 단계의 임시수복물을 통해 적절한 기능과 심미를 가진 최종보철물의 형태를 결정하였으며 최종 보철물의 적절한 구치부 교합과 임플란트 주위 변연골 유지를 보였기에 이를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• 구강회복응용과학지
• /
• 제25권3호
• /
• pp.225-235
• /
• 2009

최근 심미 치과 수복이 발달하게 되면서 치은 연상 변연을 가진 전부 도재 수복물을 하게 되는 경우 섬유 강화 포스트는 자연치와 유사한 반투명성을 보여 더욱 심미적으로 보이게 해준다. 섬유 강화 포스트인 석영 섬유 포스트와 유리 섬유 포스트로 수복시 코어 축성 방법을 달리한 5가지 군으로 분류하여 각 방법에 따른 파절강도를 비교하였다. 발치된 45개의 치아를 사용하여 모두 근관치료를 시행하고 CEJ 상방 1mm 부위에서 치축에 수직이 되도록 주수하에 치관부를 절삭하였다. A, B, C군은 #1 D.T. $Light-post^{(R)}$를 사용하였고, D, E군은 #1.5 $LuxaPost^{(R)}$를 사용하였다. A군은 제조사의 지시대로 D.T. $Light-post^{(R)}$와 시멘트로는 $DUO-LINK^{TM}$을 코어로는 $LIGHT-CORE^{TM}$을 사용하였다. B군은 시멘트와 코어로 $DUO-LINK^{TM}$을 포스트 접착 후 코어를 축성하는 이 단계 방법을 사용하였고, C군은 시멘트와 코어로 $DUO-LINK^{TM}$를 사용하면서 포스트 접착과 코어 축성을 동시에 시행하는 일단계 방법을 사용하였다. D군은 시멘트와 코어로 $LuxaCore^{(R)}-Dual$을 이단계 방법으로 축성하고, E군은 일단계 방법으로 축성하였다. ferrule 0mm로 치관을 삭제하여 금속관으로 수복 후 $45^{\circ}$로 기울여 CEJ 하방 2mm 까지 매몰 후 crosshead speed 1mm/min로 파절 강도를 측정하였다. 파절강도는 A, B, D, E, C군 순으로 작은 값을 나타냈으며 통계적 유의성은 없었다. B군에서만 치근 파절이 나타났으며 모두 재수복이 불가능한 파절이었다. 파절 양상은 모든 군에서 코어/치근 파절이 절반 이상 나타났으며, B와 D군에서는 대부분 재수복이 불가능한 파절이었다. 실험에서 나타난 결과로 미루어 섬유 강화 포스트나 코어의 종류 그리고 코어 축성 방법이 치아 파절 강도와는 큰 연관성이 없는 것으로 보인다. 파절 양상을 보면 섬유 강화 포스트를 사용했음에도 불구하고 재수복이 불가능한 경우가 절반 이상 나타났으며, 이단계 방법으로 코어를 축성한 군에서 그 수가 더 많은 것으로 보아 일단계 방법으로 코어를 축성하는 것이 재수복의 가능성을 고려해 볼 때 임상적으로 사용 가능한 효율적인 방법이라고 사료된다.

• Journal of Korean Dental Science
• /
• 제1권1호
• /
• pp.28-34
• /
• 2008

Objectives. The objectives of this study were: 1) to compare the effect of varying timing of light curing on shear bond strength, and; 2) to compare the shear bond strength of three self-adhesive cements. Materials and methods. A total of 72 extracted non-carious teeth were divided into 24 for Unicem tests, 24 for Maxcem tests, and 24 for Biscem tests; they were assigned 3 * 2 subgroups of 12 teeth each. The specimens were prepared as follows: 1) The calculus and periodontal ligament were removed from the teeth; 2) The teeth were stored in normal saline; 3) The occlusal enamel of each tooth was removed using high-speed coarse diamond burs under water cooling, and; 4) Finally, the teeth were flattened by 600-grit silicone carbide paper disks. Resin blocks were adhered using either Unicem, Maxcem, or Biscem. Light curing timing was divided into two groups: U10, M10, and B10 were exposed to light after 10 seconds, and; U150, M150, and B150 on the other side were exposed to light after 150 seconds. Shear bond strength was measured by a Universal testing machine with cross head speed of 1mm/min. T-test and One way ANOVA were used for the statistical analysis of data. Results. The shear bond strength of U150 was not significantly higher than that of U10 (U150: 20.55.7Mpa, U10: 18.73.80Mpa). On the other hand, the shear bond strength of M150 was significantly higher than that of M10. The shear bond strength of B150 was also significantly higher than that of B10 (M150:14.45.7Mpa, M10: 9.94.2Mpa, B150: 24.38.3Mpa, B10: 17.27.3Mpa). When the light curing timing was 10sec after bonding, the shear bond strength of Unicem was highest; the shear bond strength of Biscem was highest when the light curing timing was 150sec after bonding (U10: 18.73.80Mpa, B150: 24.38.3Mpa). Significance. Since Unicem is less sensitive based on light curing timing, dentists seem to use it without considering the light curing timing. Maxcem showed the lowest bonding strength (especially M10). Thus, when using Maxcem, dentists need to delay the light curing after adhesion.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권5호
• /
• pp.414-421
• /
• 2004

This is a reprospective study on the care of odontogenic infections in admission patients with geriatric diseases. The study was based on a series of 480 patients at Dong San Medical Center, Wonju Christian Hospital and Il San Health Insurance Hospital, From Jan. 1, 2000, to Dec. 31, 2002. The Obtained results were as follows: 1. The systemic malignant tumor was the most frequent cause of the geriatric diseases with odontogenic infectious diseases, and refractory lung disease, systemic heart disease, type II diabetes mellitus, cerebrovascular disease, bone & joint disease, senile psychologic disease were next in order of frequency. 2. Male prediction(57.5%) was existed in the odontogenic infectious patients with geriatric diseases. But, there were female prediction in senile psychologic disease, systemic heart disease and cerebrovascular disease. 3. The most common age group of the odontogenic infectious patient with geriatric disease was the sixty decade(47.9%), followed by the seventy & eighty decade in order. 4. In the contents of chief complaints on the odontogenic infectious patients with geriatric disease, peak incidence was occurred as toothache(52.7%), followed by extraction wish, tooth mobility, oral bleeding, oral ulcer, fracture of restoration, gingival swelling in order. 5. In the diagnosis group of odontogenic infectious diseases, periodontitis, pulpitis & periapical abscess were more common. 6. In the treatment group of odontogenic infectious diseases, the most frequent incidence(34.2%) was showed in primary endodontic treatment (pulp extirpation, occlusal reduction and canal opening drainage) and followed by scaling, incision & drainage, only drugs, pulp capping, restoration in order.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.618-629
• /
• 1998

CAD/CAM-fabricated ceramic restorations nowadays are used as alternatives of amlagam and posterior composite resin restorations, especially in the cases of inlay restorations. But the reported results on marginal and internal fit of CAD/CAM-fabricated ceramic inlay have showed considerable difference. In this study, to evaluate the marginal and internal fit of CEREC2-fabricated ceramic inlay restoration and to compare with the fit of gold inlay and amalgam restoration, standardized Class II MO cavities were prepared in forty extracted caries-free human premolars. The teeth with prepared cavities were divided into 4 groups of ten teeth each. In group 1, CEREC2-fabricated ceramic inlays were treated with Scotchbond Multi-Purpose Plus(SMP plus) and cemented with Scotchbond Resin Cement. In group 2, casted gold inlays were cemented in the same method as in group 1. In group 3, casted gold inlays were cemented with zinc-phosphate cement. And in group 4, the prepared cavities were restored with amalgam. Restored teeth were thermocycled, stored in 1% methylene blue for 24 hours, and sectioned faciolingually and mesiodistally using EXAKT. Sectioned surfaces were observed with stereomicroscope and the gaps were measured at 9 points of mesiodistally sectioned surface and 7 points of faciolingually sectioned surface. The measured data were treated by Kruskal-Wallis one way ANOVA and Student-Newman-Keuls test. 1. The differences among measured gaps at each points were statistically significant for 4 experimental groups (P<0.05). 2. There were statistically significant differences in the measured gaps at each points between group 1 and group 2, group 1 and group 3, group 1 and group 4, group 2 and group 4, and group 3 and group 4 (P<0.05). 3. There were not statistically significant differences in the measured gaps at each points between group 2 and group 3 (P>0.05). 4. In the cases of inlay restorations(group 1, group 2, group 3), the gaps at internal line angle(distopulpal, axiogingival, faciopulpal, linguopulpal line angle) had a tendency to increase. In the cases of amalgam restorations(group 4), the gaps at occlusal margin, gingival margin and axiogingival line angle were greater than those at the other parts of cavities. 5. In CEREC2-fabricated ceramic inlays which were treated with Scotchbond Multi-Purpose Plus and cemented with Scotchbond Resin Cement, the mean gaps were $111{\mu}m$ at cavity margins, $168{\mu}m$ at vertical walls of cavities, $225{\mu}m$ at internal line angles and $123{\mu}m$ at cavity floors.