• The Journal of Advanced Prosthodontics
• /
• v.4 no.1
• /
• pp.7-12
• /
• 2012

PURPOSE. Articulation paper mark size is widely accepted as an indicator of forceful tooth contacts. However, mark size is indicative of contact location and surface area only, and does not quantify occlusal force. The purpose of this study is to determine if a relationship exists between the size of paper marks and the percentage of force applied to the same tooth. MATERIALS AND METHODS. Thirty dentate female subjects intercuspated into articulation paper strips to mark occlusal contacts on their maxillary posterior teeth, followed by taking photographs. Then each subject made a multi-bite digital occlusal force percentage recording. The surface area of the largest and darkest articulation paper mark (n = 240 marks) in each quadrant (n = 60 quadrants) was calculated in photographic pixels, and compared with the force percentage present on the same tooth. RESULTS. Regression analysis shows a bi-variant fit of force % on tooth (P<.05). The correlation coefficient between the mark area and the percentage of force indicated a low positive correlation. The coefficient of determination showed a low causative relationship between mark area and force ($r^2$ = 0.067). The largest paper mark in each quadrant was matched with the most forceful tooth in that same quadrant only 38.3% of time. Only 6 2/3% of mark surface area could be explained by applied occlusal force, while most of the mark area results from other factors unrelated to the applied occlusal force. CONCLUSION. The findings of this study indicate that size of articulation paper mark is an unreliable indicator of applied occlusal force, to guide treatment occlusal adjustments.

• Journal of Korean Academy of Oral Health
• /
• v.41 no.2
• /
• pp.96-101
• /
• 2017

Objectives: The aim of this study was to investigate the relationship between cognitive function and occlusal status in elderly individuals. Methods: A total of 162 individuals aged 65 years and older, who attended the senior citizen center in Daegu city, were included after consent for participation in the study was obtained. The Korean version of the Mini-Mental State Examination (MMSE-K) was used to evaluate the level of cognitive function. Occlusal status was determined using the T-scan $III^{(R)}$ system. All collected data were analyzed by ${\chi}^2$ test, t-test, one way ANOVA, and linear regression analysis using SPSS version 23.0 for Windows. Results: There was a significant relationship between the cognitive function and the use of dentures. Individuals with posterior occlusal status had higher MMSE-K scores than those with anterior occlusal status. There was a positive correlation between the cognitive function and posterior occlusal force. Conclusions: These results suggest that occlusal status was associated with cognitive function in the elderly individuals. Active national policies to improve occlusal condition in the elderly population are needed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.4
• /
• pp.239-244
• /
• 2003

The common errors in preoperative treatment plan for the orthognathic surgery can be occurred during cast impression, cast mounting procedure with face-bow transfer, surgical stent fabrication, and so on. One of the most common errors exists during mounting process of the model on the articulator. Accurate mounting of dental casts to articulator should be achieved by transferring the 3-dimensional spatial relationship of the maxillary arch to an articulator. A face-bow is used for transfer this relationship to articulator, usually by relating the face-bow to a plane of reference of maxillary cast. The purpose of this study is evaluation of the accuracy of face-bow transferring of maxillary model to the articulator. The maxillary casts of thirty patients for orthognathic surgery were mounted on articulator with an face-bow instrument. The relationship of occlusal plane angle to Frankfort horizontal plane relations were compared the cephalogram with the cast-mounted articulator. As a result of this study, the significant difference between the maxillary occlusal planes angle in the cephalogram and articulator were found. The results were followed, 1. The mean occlusal plane angle in cast-mounted articulator was $13.5^{\circ}\;(SD{\pm}5.4)$. 2. The mean occlusal plane angle in cephalogram was $10.4^{\circ}\;(SD{\pm}4.3)$. 3. The mean difference of occlusal plane angle between cast-mounted articulator and cephalogram was $3.3^{\circ}\;(SD{\pm}4.6)$. According to the result, we should suggest that the occlusal plane angle to Frankfort plane in cast-mounted articulator is more steeper than that of cephalogram. And then, maxillofacial surgeon should try to get a more predictable result by suggesting the proper correction method and mounting the cast accurately.

• Journal of Oral Medicine and Pain
• /
• v.46 no.1
• /
• pp.14-19
• /
• 2021

Various conditions such as pain or effusion of temporomandibular joint, degenerative condylar resorption, and articular disc displacement can be a cause of malocclusion. However, the reasons of occlusal changes are ambiguous in some patients. Unexpected occlusal change in patients with or without temporomandibular disorder (TMD) symptom was mostly caused by masticatory muscular disorders. This article reports two cases of recovery of occlusal relationship in TMDs patients after stabilization splint therapy. Stabilization splint therapy could be useful in certain conditions of occlusal changes in TMD.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.25-34
• /
• 1997

This study was made with lateral cephalometric radiography of 28 skeletal class III malocclusion patients that were performed to setback surgery of mandible. The 28 patients were selected by four standards as follows. 1) Set-back amount of mandible is below 10 mm 2) No extrusion and intrusion of posterior tooth or alteration of interincisial angle at period of postoperative orthodontic treatment. 3) Change of mesial segment location of mandible on lateral cephalometrics 4) No genioplasty And 28 patients were divided to three group(1,2,3 group) by degree of preoperative occlusal plane angle to Burstone's horizontal plane. The preoperative occlusal plane angle, which of 1 group was smaller than $7^{\circ}$ and 2 group was between $7^{\circ}$ to $15^{\circ}$ and 3 group was larger than $15^{\circ}$. The results were as follows : 1. As the preoperative occlusal plane angle was larger, the degree of mandibular prognathism was not severe. 2. On comparsion of preoperative and immediate postoperative cephalometric analysis, specific relationship of occlusal plane angle and set-back amount of mandible was not present. 3. As the preoperative occlusal plane angle was smaller, the alteration of postoperative occlusal plane angle was increased tendency. As the preoperative occlusal plane angle was larger, the alteration of postoperative occlusal plane angle was decreased tendency. 4. The relapsed degree of B point distance to Vertical plane was not relationship to the degree of preoperative occlusal plane angle.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.299-308
• /
• 1996

In order to epidemiologically verify the tensile that cervical abfraction is developed from the tensile stress during lateral excursion, comparisons between the experimental group with cervical abfraction and the control group without cervical abfaction was made by exmining the occlusal wear and patterns from the dental cast. 1. The degree of occlusal wear in the experimental group with cervical abfraction was higher than that of control group without cervical abfraction.(p<0.05) 2. No significant difference in the occlusal wear pattern was found between the experimental group and the control group. 3. Higher degree of occlusal wear was found in the age group of abov 40 than that of below 40.(p<0.05) 4. There was a correlation between the degree of occlusal wear and the degree of cevical abfraction.(p<0.05) 5. There was a correlation between the age and the degree of cevical abfraction.(p<0.05) It can be concluded that occlusal stress is the etiologic factor of cervical abfraction, but no clear distinction was made between the relationship of tensile stress and cervical abfraction.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.3
• /
• pp.132-135
• /
• 2011

PURPOSE. To study the distribution of various occlusal schemes as well as associated static occlusal relationship among Thais. MATERIALS AND METHODS. The subjects'occlusal schemes on the left and right sides were classified as canine protected occlusion, group function, or unclassified according to the definition from Glossary of Prosthodontic Terms ($8^{th}$ edition). In addition, the presence of occlusal interferences during mandibular excursions were recorded. The measurement of the horizontal overlap and vertical overlap was also performed. Chi-square, One-way ANAVA and Mann-Whitney U statistical tests were used with level of significance set at P=.05. RESULTS. Total of 104 subjects were included in this study. The ratio for male to female was 1.8 to 1. Average age of the population was $25.01{\pm}6.87$ years old. The mean vertical overlap and horizontal overlap were $1.94{\pm}1.20$ and $2.41{\pm}1.32$ mm respectively. The majority of the populations (68.3%) possessed group function occlusal scheme. For the remaining, 17.3% possess canine protected occlusion and 12.5% possess combination of both occlusal schemes. We also found that occlusal interference was presented in 20.2% of the population. The most common was protrusive interference (57.14%), the second was balancing interference (38.1%) and the third was working interference (4.1%). CONCLUSION. Among Thais, the most common occlusal scheme was group function, however there were no significant occlusal factors related to any particular occlusal scheme.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.143-148
• /
• 2009

Introduction: To correct abnormal occlusal plane by orthognathic surgery, we need to have clear criteria for therapeutic occlusal plane. Authors introduced the concept of individualized ideal occlusal plane(Y-plane), which is determined by the size and form of the mandible, and the ideal incisor tip considering upper and lower lip. Authors studied the following to verify if the actual occlusal plane of the patients with optimal jaw relationship corresponds with the individualized ideal occlusal plane. Patients: We reviewed 44 patients who have normal occlusion visitied in the Dept. of orthodontics, Pundang CHA hospital. Methods: We evaluated if there are agreement between individualized ideal occlusal plane(Y plane) and occlusal plane of actual patients. And we confirmed if tested group has a normal face by measuring FABA, FMA, AB-LOP. Results: There were no significant differences of FABA, FMA, AB-LOP, Mo-Y plane between male and female. FABA, FMA and AB-LOP were included in the normal value. Average distance of Mo-Y plane was $0.75{\pm}0.78mm$. Conclusion: Individualized ideal occlusal plane may be applied to orthognathic surgery.

• Imaging Science in Dentistry
• /
• v.31 no.4
• /
• pp.205-207
• /
• 2001

Purpose : The aim of present study is to estimate the relationship among reference lines used for taking the extraoral radiography and panoramic radiography. Materials and Methods: Lateral cephalographs of 40 adults, aged 22 to 30 years were taken. Angles between reference lines (Frankfort line, canthomeatal line, infraorbitomeatal line, and occlusal plane) were measured. Results: Angles between Frankfort line and canthomeatal line, Frankfort line and infraorbitomeatal line, Frankfort line and occlusal plane, canthomeatal line and infraorbitomeatal line, canthomeatal line and occlusal plane, and infraorbitomeatal line and occlusal plane were 16.1° (±2.2), 5.8° (±2.4), 8.7° (±3.5), 10.3° (±1.3), 24.8° (±4.0), and 14.5° (±4.4),respectively. Conclusion: Angle between frankfort and canthomeatal line is very different with commonly known angle. Frankfort horizontal reference lines used for panoramic radiography need an exact definition and more accurate standard is needed for the taking of panoramic radiograph.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.203-208
• /
• 2016

Purpose: This study introduces the production process of dog's dental prosthesis using an automated dental prosthetics technology. The occlusal interaction of dog's dental prosthesis was observed. Methods: This study was proceeded with dog's the mandibular first molar teeth. The 3D CAD designed to 3D model specimens was observed by CAD software. and The specimens designed to 3D model specimens was observed occlusal interaction by using articulator. Results: Occlusal contact point in prosthetic specimens were observed in buccal surface. and 98% of the size of the crown is the best occlusal relationship. Conclusion: Observation of occlusal relations result to 98% of the size of the crown is the best.