• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.791-802
• /
• 1998

The purpose of this study was to obtain the angulation and inclination of FACC of all teeth to FH plane. Study models of 31 persons with normal occlusion were selected and mounted on the semiadjustable articulator for this study. Using T.A.R.G. with a little modified method, the angulation and inclination of FACC of all teeth to FH plane were measured and then the measurements were analyzed statistically. The obtained results were as follows. Mean, standard deviation, maximum value, and minimum value of the angulation and inclination of FACC of upper and lower teeth were obtained. $\cdot$The FACC in both upper and lower arch was progressively lingually-inclined from anterior teeth to posterior teeth. $\cdot$In the angulations of FACC of upper teeth, central and lateral incisor showed similar value. Yet, the FACC of the rest was progressively distally-angulated from the canine to posterior teeth. The FACC in lower arch was progressively mesially-angulated from anterior teeth to posterior teeth. $\cdot$The angulation and inclination of FACC of any tooth in both upper and lower teeth correlated strongly and positively with the angulation and inclination of FACC of adjacent tooth.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.380-393
• /
• 2004

The Purpose of this study was to investigate the dentoalveolar compensation according to anteroposterior skeletal discrepancy in normal occlusion and to evaluate cephalometric parameters that quantitatively describe dental compensations. The study consisted of 90 subjects (50 males. 40 females) who were selected among specimens of normal occlusion at Seoul National, University Dental Hospital, Dept. of Orthodontics. Lateral cephalograms in centric occlusion were traced and digitized for each subject. According to the anteroposterior skeletal pattern the sample was divided into three groups. Cephalometric data were analyzed for the three groups using the SPSS program. Independent t-test, correlation analysis and regression analysis were carried out. The results were as fellows: Dentoalveolar compensation was found in upper and lower incisor inclination and occlusal plane inclination. As the mandible located anterior to the maxilla, the maxillary incisors incisors more labially. the mandibular incisors more lingually, and the occlusal plane continued to flatten. The dental parameters most correlated with anteroposterior skeletal discrepancy were L1 to SN and L1 to FH. Among the compensatory dentoalveolar changes, lower incisor inclination was strongly related to the anteroposterior jaw relationship and played au imposrtant role in obtaining a normal incisor relationship U1 to PtGn and L1 to APog were constant irrelevant to anteroposterior skeletal discrepancy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.4
• /
• pp.327-339
• /
• 1992

This study was undertaken to investigate the effect of orthognathic surgery on occlusal force. The maximum bite force was measured in 26 dentofacial deformity patients, aged 14-26(mean age 20.3) years, before surgery and at IMF removal, 3, 6, and 12months postsurgery. To grope the correlation of bite force and skeletal change after orthognathic surgery, the cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. The presurgical maximum bite force was 13.7kg in upper first molar(rt. Side 12.7kg, it. Side 14.6kg). There was remarkable difference with that of normal occlusion. 2. The recovery of bite force was very significant in according to the operation method and the duration of IMF that was 7.6kg at IMF removal, 14.2kg at 3 months, 19.7kg at 6 months. 26.1kg at 12 months postsurgery. 3. To fasten the recovery and to increase the bite force after orthognathic surgery, the long IMF time and the injury to the masticatory muscle should be avoided by the internal rigid fixation and early physical exercise. 4. The bite force was positively correlated to the changes of mandibular plane angle, the angle between platatal plane and mandibular plan, the angle between occlusal plane and mandibular plane, and negatively correlated to the changes of mandibular body length in craniofacial structure. 5. There was no correlationship between bit force and mesial inclination of tooth long axis of first molar in this subject. 6. There was no correlation between the changes of bite force and the changes of mechanical advantage of the temporal and masseter muscle.

• The Journal of the Korean dental association
• /
• v.16 no.9 s.112
• /
• pp.689-693
• /
• 1978

A girl (Hellman dental age IIC) with anterior cross bite was treated by means of the chincap and occlusal equilibration on deciduous canines. Following results were obtained; 1) The cross bite was corrected after 12 weeks of active treatment. 2) The terminal plane of deciduous molars had become 'a class II tendency' 3) The axial inclination of lower incisors were changed significantly.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.401-411
• /
• 2002

Precise bracket positioning is essential in modem orthodontics. However, there can be alterations in the vertical position of a bracket due to several reasons. The purpose of this study was to evaluate the effect of variations in the vertical bracket position on the crown inclination in Korean patients with normal occlusion. From a larger group of what was considered to be normal occlusions obtained from the Department of Orthodontics, College of Dentistry, Seoul National University, each of the final 10 subjects (6 males and 4 females, with an average age of 22.3 yews) was selected. The dental models of each of the subjects were scanned three-dimensionally by a laser scanner, and measurements drawn from these were made on the scanned dental casts of the subjects were input into the computer program. From this the occlusal plane and the bracket plane were determined. The tooth plane was then constructed to measure the crown inclination on the bracket plane of each tooth. From a practical standpoint, information was obtained on the extent to which the torque of a tooth would be changed as the bracket position was to be moved vertically (in ${\pm}0.5mm,\;{\pm}1.0mm,\;{\pm}1.5mm$) from its ideal position. A one way analysis of the variance (ANOVA) was used to compare each group of the different vertical distances from the bracket plane on a specific tooth. Duncan's multiple comparison test was then performed. There were statistically significant differences in the crown inclination among the groups of different vertical distances for the upper central incisor, upper lateral incisor, upper canine, upper first and second molars, lower first and second premolars, and lower first and second molars (p<0.05). On the upper anterior teeth, upper molars, lower premolars and lower molars, the resultant torque values due to the vertical displacement of the bracket were different depending on the direction of the displacement, occlusal or gingival. This study implies that the torque of these teeth should be handled carefully during the orthodontic treatment. In circumstances in which the bracket must be positioned more gingivally or occlusally due to various reasons, it would be useful to provide the chart of torque alteration of each tooth referred to in this study with its specified bracket prescription.

• Journal of Korean Dental Science
• /
• v.7 no.1
• /
• pp.16-24
• /
• 2014

Purpose: This study was planned to clarify a negative view of chewing gum due to the concern that continuous gum chewing might cause a change in the gonial angle and make the lower facial appearance look square. Materials and Methods: We had 25 adults (13 males and 12 females, with an average of 27.3 years) chew 6 g of gum (spearmint) evenly with both right and left posterior teeth for one hour per day for three months. We then measured their gonial angle, the inclination of occlusal plane, facial height, bone marrow density, and masticatory force before chewing, 1, 2, and 3 month after chewing to verify its significance statistically. Result: The results showed that the gonial angle increased from $122.7^{\circ}$ to $123.3^{\circ}$ (P>0.05), and thus the jaws became slightly slimmer. There was no change in the occlusal plane inclination and facial height. Meanwhile bone marrow density in the mandibular angle and ascending ramus increased from $0.285g/cm^2$ to $0.290g/cm^2$ (P<0.05), and masticatory force also increased by 0.5 kg on the right side and 0.8 kg on the left side (P<0.05). Conclusion: Continuous chewing of gum gives an appropriate exercise effect to the stomatognathic system. As chewing gum has effect on increase bone marrow density without changing the mandibular angle and facial appearance the claim that jaw bone changes to a square jaw through chewing gum is regarded to be groundless.

• The korean journal of orthodontics
• /
• v.45 no.1
• /
• pp.20-28
• /
• 2015

Objective: The purpose of this study was to observe stress distribution and displacement patterns of the entire maxillary arch with regard to distalizing force vectors applied from interdental miniscrews. Methods: A standard three-dimensional finite element model was constructed to simulate the maxillary teeth, periodontal ligament, and alveolar process. The displacement of each tooth was calculated on x, y, and z axes, and the von Mises stress distribution was visualized using color-coded scales. Results: A single distalizing force at the archwire level induced lingual inclination of the anterior segment, and slight intrusive distal tipping of the posterior segment. In contrast, force at the high level of the retraction hook resulted in lingual root movement of the anterior segment, and extrusive distal translation of the posterior segment. As the force application point was located posteriorly along the archwire, the likelihood of extrusive lingual inclination of the anterior segment increased, and the vertical component of the force led to intrusion and buccal tipping of the posterior segment. Rotation of the occlusal plane was dependent on the relationship between the line of force and the possible center of resistance of the entire arch. Conclusions: Displacement of the entire arch may be dictated by a direct relationship between the center of resistance of the whole arch and the line of action generated between the miniscrews and force application points at the archwire, which makes the total arch movement highly predictable.

• The korean journal of orthodontics
• /
• v.14 no.1
• /
• pp.151-160
• /
• 1984

This study was designed to get the informations of the mesiodistal axial inclinations of the posterior teeth and of the relationships between these and other angular measurements of facial bony structures in normal occlusion and malocclusion groups using lateral roentgenocephalograms. The subjects consisted of 73 normal occlusions (31 males 42 females), 38 Class II Division 1 malocclusions (17 males 21 females) and 47 Class III malocclusions (19 males 28 females). The findings of this study are as follows : 1. In mandible, the posterior teeth axes of Class II Division 1 malocclusion group were inclined more mesially and those of Class III malocclusion group were inclined more distally than normal occlusion group. In maxilla, Class II Division 1 malocclusion group showed more distal inclination and Class III malocclusion group showed more mesial inclinaton of 1st, 2nd premolars and more distal inclination of 1st, 2nd molars than those of the normal occlusion group. 2. There was a tendency for teeth axes to maintain nearly the same inclination in relation to occlusal plane irrespective of various OMA and OPA in each group. 3. F M A, P M A and O P A were the largest in Class II Division 1 malocclusion group and O M A, GoA were the largest in Class 111 malocclusion group. 4. There were high correlationships between mandibular teeth inclinations related to mandibular plane and 4 angular measurements except OPA, and between maxillary teeth inclinations related to palatal plane and OPA.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.17-24
• /
• 1976

The primary objective of this study was to define the differences that exist. between different sexes on the dentoskeletal framework and the soft tissue profile around the mouth. For the purpose of this study, cephalometric radiographs were obtained from the centric occlusion with closed lip position, through the research on each 42 males and females aged from 17 to 22 years with normal occlusion and acceptable facial appearence. The results were as follows: 1. Maxillary to mandibular relationships. Among the angles formed by the long axis of the maxillary and mandibular anterior teeth, the maxillary and mandibular anterior alveolar bone, and the lower and upper lips (Fig.2), only the angle formed by the lips was more acute in males than in females. The males have a more rounded profile, and the females have a flatter profile in the lower third of the face. The differences is statistically significant for the angle formed by the lips. The fact that the lips have a difference greater than that of teeth or the alveolar bone indicates that the lip position is not entirely due to tooth and bony support. Possibly the thickness of the lips has an influence. 2. Occlusal plane. The occlusal plane was related to the anterior tooth inclination, anterior alveolar bone profile, and the lip contour, both maxillary and mandibular (Fig.3). Only the angle related to lower lip was statistically significant. The females again had the more obtuse angle, indicating a flatter profile than that of the males. 3.Skeletal planes. The angles formed by the anterior maxillary lips, teeth, and alveolar bone with the Frankfort plane and the angles of the mandibular lips, teeth, and, alveolar bone and the mandibular plane were investigated (Fig.4). Results were similar to those from maxillary to mandibular relationships. The results were statistically significant for the upper lip and the lower lip, only. 4. Esthetics. The facial line and the mandibular plane were compared with the esthetic line. These angles were different for the different sexes, but only the latter was statistically significant. This difference may be due to the profile contour of the nose.

• The korean journal of orthodontics
• /
• v.48 no.5
• /
• pp.333-338
• /
• 2018

Objective: The aim of this study was to compare the buccolingual inclination of maxillary and mandibular molars in adults with different vertical facial types. Methods: Cone-beam computed tomography images of 135 adult patients (age, 20-45 years) with skeletal Class I maxillomandibular relationships were assigned to normodivergent (n = 46), hypodivergent (n = 49), and hyperdivergent groups (n = 40) according to linear and angular sella-nasion/gonion-menton measurements. The normodivergent group consisted of 24 females and 22 males, hypodivergent group of 26 females and 23 males, and hyperdivergent group of 24 females and 16 males. Buccolingual inclination of the maxillary and mandibular first and second molars was measured relative to the occlusal plane. One-way analysis of variance was used for intergroup comparison. Gender differences were evaluated using independent t-tests. Results: Buccolingual molar inclinations did not differ significantly between females and males (p > 0.05). There were no statistically significant differences among the buccolingual inclinations of the first and second maxillary and mandibular molars of the groups (p > 0.05). Conclusions: Buccolingual inclinations of maxillary and mandibular molars are similar in normodivergent, hyperdivergent, and hypodivergent adults with Class I sagittal relationships.