• Journal of Oral Medicine and Pain
• /
• v.33 no.2
• /
• pp.167-176
• /
• 2008

We analyzed 121 age estimation clients who had visited oral medicine clinic, Chonbuk National University Hospital, from January 2000 to December 2007 to evaluate its characters in Jeonllabuk-do. The obtained results were as follows : 1. There was distinct difference in sex distribution(Male : 58.7%, Female : 41.3%) and more than half percent(55.4%) was over 50's. 2. The difference between registered and alleged age was the most in more than 5 years, and most of them were over 50's. 3. There were more clients who wanted to increase their age than to decrease and was no prominent difference in sex. Age estimation clients who wanted to decrease their age were predominant under 10 years old and in 20's, and those wanted to increase were predominant in 10's and over 30's. 4. The most reasons to correct age were related to welfare benefit. The purpose of age estimation was different according to each age groups; welfare benefit was the most over 50's, occupation in 40's and 50's, friendship in 30's and 40's, sibling-related in 50's, employment in 10's and 20's. 5. Age was estimated by the attrition of permanent tooth and pulp/tooth ratio from 20 years, root apex closure for 10's and calcification of permanent tooth under 10 years old. In cases that were difficult to estimate by use of the attrition of permanent tooth and pulp/tooth ratio, age was estimated by missing time of permanent tooth and the change of mandibular angle with age. 6. The estimated ages were close to alleged age in 77.7% of clients but the rest(22.3%) was close to registered age.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.591-601
• /
• 2000

The objective of this study was to find out whether the unilateral distraction of mandible has an influence on temporomandibular joint and if it does, how significant the influence is. Four beagle dogs were used in this study. Each dog had two implants placed into the left mandible. The mandible was distracted for 14days with an distraction device as an amount of 0.75mm, twice per day after osteotomy between two implants. Each animals were sacrificed at the second, fourth, sixth and eighth week after the total distraction amount of 10.5mm were gotten. Upon embedding and staining, the specimens were evaluated with a light microscope. The results were as follows. 1. For the second week group, the articular cartilage and osteoid seam of temporal bone and condyle were relatively well maintained. There were not any significant differences between distraction side and non distraction side. 2. For the fourth week group, the periosteal reaction was activated and the articular cartilage and osteoid seam of temporal bone and condyle were severely thickened - especially at posterior portion of distraction side. This findings revealed that the unilateral distraction forces has more influence on distraction side than on non distraction side, and on posterior portion than on anterior portion. 3. For the sixth and eighth week group, the thickness of meniscus in distraction side gradually recovered to the initial level. The thickened articular cartilage and osteoid seam of temporal bone and condyle were decreased in distraction side and showed relatively stable in non distraction side. From this results, we suggest that several considerations are required such as using an occlusal splint, maintaining the stability of bone distraction device and evaluating bone distraction rate to minimize the damages of temporomandibular joint tissues in early stage of distraction side.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.85-91
• /
• 2004

The purpose of this study was to observe in vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. The kinds of light-curing sources were plasma arc light(P), low heat plasma arc light, traditional low intensity halogen light, low intensity LED(L-LED), and high intensity LED(H-LED). Temperature at the tip of light guide was measured by a digital thermometer using K-type thermocouple. Occlusal cavities$(2{\times}2{\times}1.5mm)$ were so prepared in extracted human premolars as to the remaining dentin thickness was 1mm. Dentin adhesive was applied to all cavities. Experimental groups consisted of no base group, ionomer glass base group, and calcium hydroxide base group. Temperature before and after resin filling was measured. Temperature at the light guide tip was the highest with P and the lowest L-LED. Temperature before resin filling was the highest with H-LED and the lowest with L-LED. Temperature after resin filling was the highest with H-LED and the lowest with L-P and with L-LED. The lining of base partially reduced the temperature rise.

• Journal of Oral Medicine and Pain
• /
• v.38 no.3
• /
• pp.247-253
• /
• 2013

Renal osteodystrophy(RO) is characterized by skeletal changes in patients with renal disease and developed as a result of alterations in the metabolism of calcium, phosphate and secondary hyperparathyroidism. Bony changes in the craniofacial region include decreased bone density, radiolucent lesions(brown tumors), depletion of cortical bone and loss of lamina dura, but such changes rarely occur in the temporomandibular joint(TMJ). We report an uncommon case of bony changes and pain of both TMJs in a patient with RO. A 41-year-old man with RO came to our clinic due to TMJ pain and sounds. Occlusal change was also reported. Radiographs revealed degenerative changes of the both condyles. The patient had medical history of renal cancer therapy and hemodialysis. The patient was diagnosed with TMJ arthritis of RO and referred for systemic management through medication of calcium and vitamin D and parathyroidectomy. At 15-month follow-up, most of TMD symptoms disappeared and second radiographs revealed that bone density and cortical thickness of the mandible increased and the skeletal outline of the both condyles became relatively clear. As bony changes may begin in the early stage of the renal disease, dentists should be alert to detect the sign of the disease. In addition, it is important to differentiate TMJ arthritis of systemic cause because the treatment protocol is quite different.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.561-573
• /
• 2006

Statement of the problem: In cases of low bone level in maxilla followed by extraction due to severe periodontitis or enlarged maxillary sinus, crown-root ratio of implant prosthesis will increase. The prognosis of these cases is not good as expected. Purpose : The purpose is to compare stress distribution due to crown-root ratio and effect of splinting between two implants in maxillary molar area under different loads Material and methods: Using ITI($4.1{\times}10$ mm) implant. two finite element models were made(model S: two parallel implants, model A: one of two is 20 degree inclined). Each model was designed in different crown-root ratio(0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it splinted or non-splinted clinical situations. After that, 300 N force was loaded to each model in four ways.(load 1 : middle of occlusal table, load 2 : middle of buccal cusp, load 3 : middle of lingual cusp, load 4 : horizontal load to middle of buccal cusp), and stress distribution was analyzed. Results: On all occasions, stress was concentrated on neck of implant near cortical bone. In the case of inclined implant, stress was increased compared with parallel implants. Under load 1, 2, 3, stress was not increased even when crown-root ratio increases, but under load 4, when crown-root ratio increases, stress also increased. And more stress was concentrated under load 1 than load 2, 3. When crown-root ratio was same, stress under load 1, 2, 3 decreased when splinting, but under load 4, stress did not really decrease. Conclusion: Under vertical load, stress distribution related to crown-root ratio did not change. But under horizontal load, stress increased as crown-root ratio increases. Under vertical load, splinting decreased stress but under horizontal load, effect of splinting was decreased as condition of implant changes for the worse such as increase of crown-root ratio, inclined implant.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.303-308
• /
• 2011

Tooth impaction refers to situations in which the eruption is inhibited by some physical barriers in eruptive path and the tooth remains unerupted beyond the normal time of eruption. The etiology of impacted tooth is controversial, but ankylosis has been suggested probably as a leading role. Impacted primary molars may cause several problems such as space loss, tipping of adjacent teeth, supra-eruption of the antagonists, dislocation of succeeding premolar, cystic change and infection. As one of conventional treatments of impacted primary molars, early tooth extraction or surgical extraction following space regaining when there is space loss has been suggested. However, when they are in normal formation and not ankylosed, orthodontic traction following surgical exposure can be the choice of treatment. In this case, a 3-year-old boy was referred to the department of pediatric dentistry for the unerupted mandibular right second primary molar. After surgical removal of gingiva on the occlusal surface, orthodontic traction was performed. After treatment, we could get normal alignment of primary teeth and the opportunity for normal development of permanent teeth.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.85-92
• /
• 2000

Common dental procedures(dental extraction & minor operation) are potentially stress-inducing in many patients, especially medically compromised patients. The body's response to dental stress involves the cardiovascular system(an increase in cardiovascular workload), the respiratory organ and the endocrine system(change in metabolism). To minimize the stress to the medical risk patient, the stress reduction protocol was established. The obtained contents were as follows: (1) Recognize the patient's degree of medical risk (2) Complete medical consultation before dental therapy (3) Schedule the patient's appointment in the morning (4) Monitor and record preoperative and postoperative vital signs (5) Use psychosedation during therapy (6) Use adequate pain control during therapy (7) Short length of appointment : do not exceed the patient's limits of tolerance (8) Follow up with postoperative pain/anxiety control (9) Telephone the higher medical risk patient later on the same day that treatment was given Though the stress reduction protocol above was applied to the dental extraction in medically compromised patients with the advanced infected teeth, the final responsibility for the complications(syncope, bleeding & infection, etc.) in a patient rests with the dentist who ultimately treats him. For the prevention of postextraction complications & poor prognosis, the authors treated the advanced infected teeth with the pulp extirpation, opening drainage through the canal and complete occlusal reduction. The final extraction and wound closure were then done after $1{\sim}2$ weeks. The final prognosis was comfortable without common complications.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.1-13
• /
• 2001

The extraction lot orthodontic treatment can be adopted for aligning crowded dentition, improving facial esthetics and solving a skeletal discrepancy as alternative for a surgical option. Mandibular second premolar extraction was often selected as treatment plan when there we very little or no space shortage in lower arch or limited retraction of the lower incisors was required. The primary object of this study was evaluate a pretreatment condition and examine the amount of tooth movement ior a mandibular second premolar extraction in growing patients. Pretreatment and posttreatment lateral cephalograms of 14 cases that had their four first premolar extracted (4/4 group), 15 cases with upper first and lower second premolar extraction (4/5 group) were selected. Structural method superimposition was conducted to evaluate a difference of dental change between 4/4 and 4/5 group. The results were as follows, 1. Pretreatment factor for 4/4 extraction or 4/5 extraction choice included maxillary incisor axis to occlusal plane, Class II molar relationship, IMPA and interincisal angle. 2. The amount of molar anterior movement in 4/5 group was greater than that of 4/4 group(p<0.05). 3. There was no significant difference between 4/4 group and 4/5 group in aspects of maxillary tooth movement(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.694-699
• /
• 2001

The prognosis for class III patients in growing child can be made in mixed dentition and the severity of the symptom is often amenable to early intervention. Class III malocclusion can be classified as functional class lit and skeletal origin. Skeletal Class III malocclusion is usually characterized by overdeveloped mandible, underdeveloped maxilla, but the cause of pseudo class III is most dentoalveolar or functional shift of mandible. The primary goal of early intervention of malocclusion is to supply an environment that is conducive to the development of favorable occlusal relationships and avoiding of worsening of the problems. Inverted labial bow appliance is introduced as an appliance to combine the advantage of active plate and activator. It is undemanding with this appliance to initiate not only dentoalveolar expansion of upper dentition but also to orient the functional retrusion of mandible. With simple design the compliance for patients such as mouth breathing problem can be improved. For successful use of this appliance it is utmost important to make accurate and early diagnosis between pseudo- and skeletal class III malocclusion. This article will demonstrate the use of an Inverted labial bow appliance for early treatment of a functional Class III malocclusion. After 4 month treatment, anterior crossbite was treated and the results were achieved mainly dentoalveolar change of upper and lower anterior teeth.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.225-231
• /
• 2021

There are many studies on the indications and efficacy of splint therapy commonly used in patients with temporomandibular disorders (TMD). However, there have been no studies on the splint weaning in terms of the splint use tapering period in relation to symptom improvement of TMD. This retrospective study aims to analyze a proper splint weaning method in patients with TMD based on symptom improvement. Materials and Methods: The authors examined 130 TMD patients with TMJ disorders, masticatory muscle disorders, and clenching/bruxism who had received splint therapy (occlusion stabilization splint, anterior positioning splint) of patients who visited the Department of Orofacial Pain and Oral Medicine at Yonsei University Dental Hospital from 2015 to 2020. They were evaluated according to the method to wean splints. Results: The mean splint therapy period was 29.0 months, during which patients wore splints 7 days a week for 8.4 months, 3 - 4 days a week for 9.5 months, and finally 1 - 2 days a week for 11.1 months (a total of 29.0 months, about 2.5 years). Conclusion: It seems that TMD symptoms can be alleviated and side effects such as occlusal change can be minimized if patients wear a splint 7 days a week for the first 6 months, followed by 3 - 4 days a week for the next 6 to 18 months, and finally 1 - 2 days a week after 18 months.