• Journal of Korean Public Health Nursing
• /
• v.31 no.3
• /
• pp.478-491
• /
• 2017

Purpose: This study was conducted to determine whether alcohol drinking patterns (drinking frequency, drinking quantity, binge drinking frequency and risk drinking) were related to obesity and abdominal obesity. Methods: A total of 6,749 adult men from the sixth Korea National Health and Nutrition Examination Survey were evaluated. Multivariate logistic regression analyses were employed to determine if obesity and abdominal obesity was associated with alcohol consumption patterns after adjusting for covariates. Results: No relationship was observed between drinking frequency and obesity. The odds ratio vs. nondrinkers for obesity was significantly low for individuals who consumed 5 to 6 drinks per typical occasion and monthly binge drinking. However ${\geq}7$ drinks per typical occasion resulted in a significantly higher odds for obesity relative to nondrinkers. The odds ratio vs. nondrinkers for abdominal obesity was significantly lower in response to monthly binge drinking, whereas ${\geq}10$ drinks per typical occasion and daily binge drinking resulted in significantly higher odds for abdominal obesity. Risk drinking had higher odds for abdominal obesity than non-risk drinking. Conclusion: Although moderate alcohol drinkers have a lower prevalence of obesity and abdominal obesity than nondrinkers, higher drinking quantity and frequent binge drinking are indicators of a higher prevalence of obesity and abdominal obesity in men.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.2
• /
• pp.144-152
• /
• 1998

Changes of biological components in haemolymph of Helicoverpa assulta Guenee were investigated during the development and pupae of cold-stress periods. Protein content was the highest in the larval stage, whereas it showed somewhat lower level at the cold-stressed pupae. The level of free amino acids was high in the larval and adult stages. Althougth decresed in pupal stage, the level of free amino acid remarkably increased at the cold-stressed pupae. Total lipids were a little increased at the pupal stage, after small quantity decreased in I-day old adults, and then remarkably decreased at the cold-stressed pupae. Glycogen was increased at the pupal stage, and somewhat decreased in the stage of adult, but remarkably decreased at the cold-stressed pupae. From thin layer chromatographic analysis, glucose was detected in small quantity at 1-day old pupae, one-day old adults, and cold-stressed pupae, respectively. Each .activity of acid and alkaline phosphatases was the highest in the 1 and 7-day old pupae, respectively, and both enzyme activities were increased about two-fold compared to the activity in the cold-stressed pupae. A total of 2 phosphatase isozymes were observed in throughout the developmental stage, and a new isozyme specific to cold-stressed pupae was identified.

• YAKHAK HOEJI
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1981

Glycyrrhizin (GA) content in licorice was determined by a couple of methods using HPLC, respectively. In Method(I), GA content itself was determined from the licorice aqueous extract, while in Method (II) glycyrrhetinic acid (GHeA ; the aglicone of GA) content corresponding to the quantity of GA was measured from the chloroform extract of the hydrolyzed product of licorice aqueous extract. A reverse phase column Hibar Lichrosorb RP-18 (E. Merck) was used as the stationary phase. As the mobile phase MeOH: $H_{2}O$(0.05M-$NaH_{2}PO_{4}$)=58 : 42 solution in Method (I), and MeOH: $H_{2}O $: AcOH=78; 19: 3 solution in Method (II) were suitable, respectively. The value obtained by Method (II) appeared slightly higher than that by Method (I). The effect of some other herbal drugs on the assay of GA quantity in mixed sample was also observed in both above two methods. By Method (I) Cassiae Cortex, Rehmaniae Rhizoma, Paeoniae Radix, and Angelicae Radix gave the subtractive effect on the amount of GA compared with the value from licorice alone. In the case of Method (II) Cassiae Cortex and Rehmaniae Rhizoma appeared to have subtractive effect but Paeoniae Radix and Angelicae Radix scarcely showed any influence. Pachymae Fungus did not affect the GA content at all. It seems that glycyrrhizin in licorice interacts with certain components of other herbal drugs.

• Food Science of Animal Resources
• /
• v.42 no.3
• /
• pp.486-503
• /
• 2022

This study explored the physiochemical and rheological properties of chicken breast sausages containing red ginseng marc (RGM) which contains useful components but is discarded. When compared to the control group, the use of RGM significantly increased the water holding capacity (WHC) as the particle size increased. As for the change in color value, addition of RGM resulted in an increase in a and b values; as the quantity was increased and particle size decreased, the a and b values increased significantly. The smaller the particle size of RGM, the greater was the radical scavenging activity. According to the results of the measurement of the viscoelasticity of chicken breast sausage containing RGM, the G' and G'' values increased with increasing amounts of RGM and particle size. Neither the addition of RGM nor its amount or particle size had any significant effect on gel formation temperature. The texture profile analysis (TPA) experiment examined the average TPA measurements of each sample under different measurement conditions, and no significant difference between the RGM and control groups were observed. In conclusion, when RGM is used in chicken breast sausages, the WHC, antioxidant capacity, and viscoelastic properties are affected. RGM can possibly be utilized in high value-added processed meat products if its quantity and particle size are altered based on product characteristics.

• Korean Journal of Materials Research
• /
• v.28 no.10
• /
• pp.578-582
• /
• 2018

ZnO crystals with different morphologies are synthesized through thermal evaporation of the mixture of Zn and Cu powder in air at atmospheric pressure. ZnO crystals with wire shape are synthesized when the process is performed at $1,000^{\circ}C$, while tetrapod-shaped ZnO crystals begin to form at $1,100^{\circ}C$. The wire-shaped ZnO crystals form even at $1,000^{\circ}C$, indicating that Cu acts as a reducing agent. As the temperature increases to $1,200^{\circ}C$, a large quantity of tetrapod-shaped ZnO crystals form and their size also increases. In addition to the tetrapods, rod-shaped ZnO crystals are observed. The atomic ratio of Zn and O in the ZnO crystals is approximately 1:1 with an increasing process temperature from $1,000^{\circ}C$ to $1,200^{\circ}C$. For the ZnO crystals synthesized at $1,000^{\circ}C$, no luminescence spectrum is observed. A weak visible luminescence is detected for the ZnO crystals prepared at $1,100^{\circ}C$. Ultraviolet and visible luminescence peaks with strong intensities are observed in the luminescence spectrum of the ZnO crystals formed at $1,200^{\circ}C$.

• Solar Energy
• /
• v.11 no.2
• /
• pp.41-50
• /
• 1991

Heat transfer phenomena and temperature characteristics in heat storage and release process in the heat storage system using PCM(Phase Change material) were studied experimentally. The melting points of Octacosane paraffin($C_{28}H_{58}$) and sodium pyrophosphate decahydrate ($Na_4P_2O_7{\cdot}10H_2O$) used for phase change materials are $62^{\circ}C$ and $79^{\circ}C$ respectively. Experiments were performed in order to investigate temperature distributions, the heat storage quantity and the release quantity on octacosane paraffin and sodium pyrophosphate decahydrate for heat storage and release in the heat storage system. Furthermore the comparison of these characteristics between paraffin and $Na_4P_2O_7{\cdot}10H_2O$ were evaluated. In case of the paraffin, temperature slowly increased at early heat storage process by natural convection, while temperature of $Na_4P_2O_7{\cdot}10H_2O$ rapidly increased the dominant role played by conduction at early heat storage processing Also, during the heat storage and release process in case of the paraffin, it was observed that the variation of temperature of the neighborhood of wall and center in the top and bottom of the tube exhibited a great difference, however in $Na_4P_2O_7{\cdot}10H_2O$, it was observed that the variation of temperature exhibited a little difference. And heat storage quantity of each PCM of identity mass in heat storage process was shown that $Na_4P_2O_7{\cdot}10H_2O$ exhibited more by 16 percents than paraffin.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.1-13
• /
• 2005

In the process of a hydrology circulation, evapotranspiration is considered a very important factor to build a plan for the development of water resources and to operate water resources system. This study purposes to estimate daily potential evapotranspiration quantity in consideration of energy factors of the surface by using spatial information such as Landsat TM (ETM+) data, DEM and Landcover. Kyounan-cheon, Han River is selected as a target area, and landcover is divided by vegetation and non-vegetation covered area. Penman-Monteith equation which considers leaf-area index is used to estimate potential evapotranspiration quantity of vegetation covered area. The combination method (energy burget and aerodynamic method) is used in non-vegetation covered area. Among the input data for estimating potential evapotranspiration, NDVI, SR and Albedo is formed by Landsat, TM and ETM+ from 1986 through 2002. ground heat flux is estimated by using NDVI distribution map, LAI distribution map is drawn by using SR distribution map. The result of estimation shows that the average potential evapotranspiration in the whole basin is about 1.8-3.2mm/day per each cell. THe results of estimating potential evapotranspiration quantity by each landcover are as follows; water surface 3.6-4.9mm/day, city 1.4-3.1mm/day, bareland 1.4-3.5mm/day, grassland 1.7-3.7mm/day, forest 1.7-3.0mm/day and farmland 1.8-3.6mm/day. The potential evapotranspiration quantity is underestimated in comparison with observed evaporation data by evaporation pan, but it is considered that it has physical propriety.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1996

The effects of multipore spawn inoculation of Lentinus edodes on the mycelial growth stage and on the quantitative and qualitative yields of fruit-bodies for 5 years were investigated at natural environmental conditions. The spawn inoculation quantity did not affect the mycelial rooting at a range of 3.0kg-6.0kg per $m^3$ of bed-logs while the increase of spawn quantity by multipore inoculation increased the mycelial growth and the inner erosion of bed-logs, resulting in the increased yields of total fruit-bodies of L. edodes per $m^3$ of bed-logs for 5 years but resulting in the shortened major production period of fruit-bodies to the the first three years. Major production of fruit-bodies occurred during May-June and August-September, which was not affected by the spawn inoculation quantity. No significant differences in dry weight of a fruit-body were observed as increasing the spawn quantity by multipore inoculation; however the heaviest dry weight of a fruit-body was 1.63g at the spawn inoculation of 4.0kg per $m^3$/TEX> of bed-logs.

• Composites Research
• /
• v.37 no.3
• /
• pp.170-178
• /
• 2024

This study proposes a hybrid composite where a thin copper film (Cu film) is embedded in carbon fiber reinforced plastic (CFRP), and quantum annealing is applied to derive the combination of Cu film placement that maximizes the through-thickness thermal conductivity. The correlation between each ply of CFRP and the Cu film is analyzed through finite element analysis, and based on the results, a combination optimization problem is formulated. A formalization process is conducted to embed the defined problem into quantum annealing, resulting in the formulation of objective functions and constraints regarding the quantity of Cu films that can be inserted into each ply of CFRP. The formulated equations are programmed using Ocean SDK (Software Development Kit) and Leap to be embedded into D-Wave quantum annealer. Through the quantum annealing process, the optimal arrangement of Cu films that satisfies the maximum through-thickness thermal conductivity is determined. The resulting arrangements exhibit simpler patterns as the quantity of insertable Cu films decreases, while more intricate arrangements are observed as the quantity increases. The optimal combinations generated according to the quantity of Cu film placement illustrate the inherent thermal conductivity pathways in the thickness direction, indicating that the transverse placement freedom of the Cu film can significantly affect the results of through-thickness thermal conductivity.

• Journal of Environmental Policy
• /
• v.9 no.1
• /
• pp.137-154
• /
• 2010

These objectives of this study were to compute heavy metal and accumulation carbon dioxide fixing quantity from urban green space(street trees and urban parks) in Cheong-ju city and Chungju-city and thus to estimate the effect of urban green space for improving the urban environment. The results are summarized below. 1. Results of the total accumulation of the carbon dioxide fixing quantity of street trees, Cheong-ju city and Chungju-city street tree was 1, 230,000kg-C, 1,270,000 kg-C, respectively. Total accumulation carbon dioxide fixing quantity of Balssan urban park had a 25,000kg-C in Cheong-ju city, Degami sports park had a 6,400kg-C in Chungju-city. 2. Results of heavy metal for street trees, fell in the order Zn > Cu > Cr > Ni >, the highest accumulated heavy metal was Zn, and the lowest was Ni. Total heavy metal concentration according to land-use area, was observed in order, for residental areas(157.26 mg/kg) > industrial areas(141.71 mg/kg) > commercial areas(118.55 mg/kg) > and greenspace areas(61.95 mg/kg) in Cheong-ju city. 3. Total heavy metal concentration for street trees fell in the order of commercial areas(84.48 mg/kg) > residental areas(83.70 mg/kg) > and greenspace(48.23 mg/kg) according to land-use area in Chungju-city. Comparatively, Cheong-ju city had more total heavy metal concentration than Chungju-city. 4. Heavy metal for soil that planted street trees was observed in order of Zn > Cu > Pb( > Ni > Cr > As > Cd), and Zn was highest, and Cd was lowest. Total heavy metal concentration for soil fell in the order commercial area(91.82mg/kg) > industrial area(85.96mg/kg) > residental area(67.55mg/kg) > greenspace(43.13mg/kg) according to land-use area in Cheong-ju city. 5. Heavy metal for soil that planted street trees was observed in order of Zn > Pb > Cu( > Ni > Cr > As > Cd, and Zn was highest. Total heavy metal concentration for soil fell in the order commercial area(87.66mg/kg) > greenspace(72.73mg/kg) $${\geq_-}$$ residental area(70.10mg/kg) in Chungju-city.