• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.67-67
• /
• 2020

Though there is an on-going need for the diversity of ornamental plants for in-door environment, their growth and stress adaptability in comparatively low light intensity condition require further studies for implementation. Here investigates the growth and chlorophyll fluorescence parameters of Farfugium japonicum (L.) Kitam, Liriope muscari (Decne.) L.H.Bailey and Acorus gramineus Aiton under several light intensities which were based on common in-door environment. The growth measurement of the plants included the quantity, length, width and SPAD value of the leaves. Calculated values of Fm/Fo, Fv/Fm, Pi_Abs, ETo/RC and DIo/RC were used as the parameters of the chlorophyll fluorescence under 10, 50, 100 and 200 PPFD (μmol·m^-2·s^-1) light intensities. In-door plants group was put in a closed room allowing no other light sources for 10 weeks and the control group was put in glass-greenhouse for the same period. The overall in-door growth of L. muscari was not significantly different in all light intensities compared to the control group and even showed the higher SPAD values. Also, an increasing tendency of Pi_Abs value under 10 to 100 PPFD was observed implying that L.muscari could adapt well to in-door environment. Measurement of A. gramineus growth mostly showed the highest values in the control group especially in the number of the leaves. Nevertheless, chlorophyll fluorescence parameters showed no significant value difference between in-door and the control groups and thus, A. gramineus might have possibility of successful adaptation to in-door environment. F. japonicum showed deficient growth in plant height and leaf length compared to the control but, it seemed to be able to sustain ornamental value under in-door light intensities. Furthermore, Pi_Abs and DIo/RC values were increased under in-door light conditions suggesting potential adaptability of F. japonicum.

• Journal of Korean Society of Forest Science
• /
• v.113 no.2
• /
• pp.259-270
• /
• 2024

Since 2013, Korea has allocated significant budgets and manpower nationwide to prevent the spread of pine wilt disease and to reduce damage. As a result, the number of damaged trees decreased from 2.18 million in 2014 to 310,000 in 2021. However, the damage has increased again since then. Despite the overall decrease in the number of damaged trees, the scope of the damage continues to expand every year. Previous studies have develope In order to judge the control performance, a quantitative control performance analysis method to objectively evaluate control performance. This method takes into consideration two factors-quantity change and the change in the damage area, which is an area factor. This approach provides a more comprehensive assessment than the control guidelines that only suggest changes in damage grade based on the volume of damaged trees. The expansion of the damage range is also an important factor in analyzing control performance, but previous studies have not reflected this. Therefore, this study calculates the change in the distance of the pine wilt disease boundary area for Gyeongsangbuk-do, where changes in the damage range can easily be observed from year to year. The study then creates application criteria and coefficients and uses them to improves control performance index calculation formula. As a result, it was possible to calculate a quantitative analysis of the control performance, taking into account the changes in the damage range. When the improved formula was applied to 26 cities, counties, and districts in Gyeongsangbuk-do, it slightly decreased or increased compared to the existing calculation formula. This confirmed that the control performance index can change from a positive value (+), indicating increased damage, to a negative value (-), indicating reduced damage.

• Korean Journal of Materials Research
• /
• v.34 no.2
• /
• pp.116-124
• /
• 2024

In this study, we investigated the microstructure and piezoelectric properties of 0.96(K_0.456Na_0.536)Nb_0.95Sb_0.05-0.04Bi_0.5(Na_0.82K_0.18)_0.5ZrO₃ (KNNS-BNKZ) ceramics based on one-step and two-step sintering processes. One-step sintering led to significant abnormal grain (AG) growth at temperatures above 1,085 ℃. With increasing sintering temperature, piezoelectric and dielectric properties were enhanced, resulting in a high d₃₃ = 506 pC/N for one-step specimen sintered at 1,100 ℃ (one-step 1,100 ℃ specimen). However, for one-step 1,115 ℃ specimen, a slight decrease in d₃₃ was observed, emphasizing the importance of a high tetragonal (T) phase fraction for superior piezoelectric properties. Achieving a relative density above 84 % for samples sintered by the one-step sintering process was challenging. Conversely, two-step sintering significantly improved the relative density of KNNS-BNKZ ceramics up to 96 %, attributed to the control of AG nucleation in the first step and grain growth rate control in the second step. The quantity of AG nucleation was affected by the duration of the first step, determining the final microstructure. Despite having a lower T phase fraction than that of the one-step 1,100 ℃ specimen, the two-step specimen exhibited higher piezoelectric coefficients (d₃₃ = 574 pC/N and k_p = 0.5) than those of the one-step 1,100 ℃ specimen due to its higher relative density. Performance evaluation of magnetoelectric composite devices composed of one-step and two-step specimens showed that despite having a higher g₃₃, the magnetoelectric composite with the one-step 1,100 ℃ specimen exhibited the lowest magnetoelectric voltage coefficient, due to its lowest k_p. This study highlights the essential role of phase fraction and relative density in enhancing the performance of piezoelectric materials and devices, showcasing the effectiveness of the two-step sintering process for controlling the microstructure of ceramic materials containing volatile elements.

• Korean Journal of Radiology
• /
• v.24 no.12
• /
• pp.1232-1240
• /
• 2023

Objective: To investigate the imaging characteristics of large duct pancreatic ductal adenocarcinoma (LD-PDAC) on computed tomography (CT) and magnetic resonance imaging (MRI). Materials and Methods: Thirty-five patients with LD-PDAC (63.2 ± 9.7 years) were retrospectively evaluated. Tumor morphology on CT and MRI (predominantly solid mass vs. solid mass with prominent cysts vs. predominantly cystic mass) was evaluated. Additionally, the visibility, quantity, shape (oval vs. branching vs. irregular), and MRI signal intensity of neoplastic cysts within the LD-PDAC were investigated. The radiological diagnoses rendered for LD-PDAC in radiology reports were reviewed. Results: LD-PDAC was more commonly observed as a solid mass with prominent cysts (45.7% [16/35] on CT and 37.1% [13/35] on MRI) or a predominantly cystic mass (20.0% [7/35] on CT and 40.0% [14/35] on MRI) and less commonly as a predominantly solid mass on CT (34.3% [12/35]) and MRI (22.9% [8/35]). The tumor morphology on imaging was significantly associated with the size of the cancer gland on histopathological examination (P = 0.020 [CT] and 0.013 [MRI]). Neoplastic cysts were visible in 88.6% (31/35) and 91.4% (32/35) of the LD-PDAC cases on CT and MRI, respectively. The cysts appeared as branching (51.6% [16/35] on CT and 59.4% [19/35] on MRI) or oval shapes (45.2% [14/35] on CT and 31.2% [10/35] on MRI) with fluid-like MRI signal intensity. In the radiology reports, 10 LD-PDAC cases (28.6%) were misinterpreted as diseases other than typical PDAC, particularly intraductal papillary mucinous neoplasms. Conclusion: LD-PDAC frequently appears as a solid mass with prominent cysts or as a predominantly cystic mass on CT and MRI. Radiologists should be familiar with the imaging features of LD-PDAC to avoid misdiagnosis.

• Structural Engineering and Mechanics
• /
• v.90 no.6
• /
• pp.611-633
• /
• 2024

This study intends to investigate the response of multi-cell (MC) beams to flexural loads in which the primary reinforcement is composed of both metallic and non-metallic materials. "Multi-cell" describes beam sections with multiple longitudinal voids separated by thin webs. Seven reinforced concrete MC beams measuring 300×200×1800 mm were tested under flexural loadings until failure. Two series of beams are formed, depending on the type of main reinforcement that is being used. A control RC beam with no openings and six MC beams are found in these two series. Series one and two are reinforced with metallic and non-metallic main reinforcement, respectively, in order to maintain a constant reinforcement ratio. The first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were among the structural parameters of the beams under investigation that were documented. The primary variables that vary are the kind of reinforcing materials that are utilized, as well as the kind and quantity of mesh layers. The outcomes of this study that looked at the experimental and numerical performance of ferrocement reinforced concrete MC beams are presented in this article. Nonlinear finite element analysis (NLFEA) was performed with ANSYS-16.0 software to demonstrate the behavior of composite MC beams with holes. A parametric study is also carried out to investigate the factors, such as opening size, that can most strongly affect the mechanical behavior of the suggested model. The experimental and numerical results obtained demonstrate that the FE simulations generated an acceptable degree of experimental value estimation. It's also important to demonstrate that, when compared to the control beam, the MC beam reinforced with geogrid mesh (MCGB) decreases its strength capacity by a maximum of 73.33%. In contrast, the minimum strength reduction value of 16.71% is observed in the MC beams reinforced with carbon reinforcing bars (MCCR). The findings of the experiments on MC beams with openings demonstrate that the presence of openings has a significant impact on the behavior of the beams, as there is a decrease in both the ultimate load and maximum deflection.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.37-44
• /
• 2024

This study was conducted to validate the growth and productivity of cucumber hydroponics using coir as the medium, different types of nutrient solutions and formal methods, in order to select the most efficient cultivation method. The nutrient solutions consisted of culture solution (S) and raw water (W), the planting methods were rockwool cube seedlings (RC), rockwool plug seedlings (RP), and slab directly seedlings (DS). The reference date was set the sowing date. The initial growth showed a significant increase in the culture solution treatment, the differences among treatments decreased as the growth period lengthened. There was no apparent correlation between the planting methods and growth, but different results were observed among the same planting methods depending on nutrient solution used. Similarly, productivity followed a similar trend, with significantly higher harvest in the culture solution treatment during the initial harvest period of 6-8 weeks after sowing, but the harvest gap among treatments were diminished in the after period. The cumulative harvest was significantly higher in the culture solution treatment due to the initial difference in harvest quantity. Plant growth and fruit productivity exhibited a similar trend, showing a linear relationship. There was no correlation among the planting methods, but direct seedling with the culture solution showed the highest initial growth and harvests due to stable nutrient and moisture supply in the initial root zone. Therefore, it is believed that direct seeding method on the culture solution medium would be most advantageous for plant growth and productivity. Additionally, it is expected to contribute to cost effectiveness from an economic perspective through simplification of the cultivation process, labor costs and production cost reduction

• Journal of Soil and Groundwater Environment
• /
• v.29 no.5
• /
• pp.14-26
• /
• 2024

This study investigated the effectiveness of calcium polysulfide (CPS; CaS_x) injection for the in-situ immobilization of cadmium and zinc-contaminated groundwater. The research focused on the impact of CPS injection on groundwater quality parameters, such as dissolved oxygen (DO), oxidation-reduction potential (ORP), and pH, as well as heavy metal precipitate formation and aquifer's microbial community dynamics on a field scale. The results demonstrated that the injected CPS formed a reactive zone, effectively reducing cadmium and zinc concentrations for a limited period. However, contaminant rebound occurred over time, necessitating repeated CPS injections. A single injection of CPS achieved a removal efficiency of 70~99%, lasting approximately 20 days. In contrast, repeated injections sustained the removal effects up to 37 days. Chemical analyses confirmed the precipitation of cadmium and zinc sulfide (CdS and ZnS), which remained stable in the aquifer even 86 days post-injection. Elemental sulfur (S) was detected in a significant quantity, contributing to the observed low DO levels. Microbial community exhibited a shift from an initial prevalence of sulfur-oxidizing and iron-oxidizing bacteria to a later dominance of sulfate-reducing bacteria following the cessation of high DO recycled water inflow, potentially enhancing the formation of CdS and ZnS.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.2
• /
• pp.109-122
• /
• 2003

To examine the causal relationship between geomagnetic storm and substorm, we investigate the correlation between dispersionless particle injection rate of proton flux observed from geosynchronous satellites, which is known to be a typical indicator of the substorm expansion activity, and Dst index during magnetic storms. We utilize geomagnetic storms occurred during the period of 1996 ~ 2000 and categorize them into three classes in terms of the minimum value of the Dst index ($Dst_{min}$); intense ($-200nT{$\leq$}Dst_{min}{$\leq$}-100nT$), moderate($-100nT{\leq}Dst_{min}{\leq}-50nT$), and small ($-50nT{\leq}Dst_{min}{\leq}-30nT$) -30nT)storms. We use the proton flux of the energy range from 50 keV to 670 keV, the major constituents of the ring current particles, observed from the LANL geosynchronous satellites located within the local time sector from 18:00 MLT to 04:00 MLT. We also examine the flux ratio ($f_{max}/f_{ave}$) to estimate particle energy injection rate into the inner magnetosphere, with $f_{ave}$ and $f_{max}$ being the flux levels during quiet and onset levels, respectively. The total energy injection rate into the inner magnetosphere can not be estimated from particle measurements by one or two satellites. However, the total energy injection rate should be at least proportional to the flux ratio and the injection frequency. Thus we propose a quantity, “total energy injection parameter (TEIP)”, defined by the product of the flux ratio and the injection frequency as an indicator of the injected energy into the inner magnetosphere. To investigate the phase dependence of the substorm contribution to the development of magnetic storm, we examine the correlations during the two intervals, main and recovery phase of storm separately. Several interesting tendencies are noted particularly during the main phase of storm. First, the average particle injection frequency tends to increase with the storm size with the correlation coefficient being 0.83. Second, the flux ratio ($f_{max}/f_{ave}$) tends to be higher during large storms. The correlation coefficient between $Dst_{min}$ and the flux ratio is generally high, for example, 0.74 for the 75~113 keV energy channel. Third, it is also worth mentioning that there is a high correlation between the TEIP and $Dst_{min}$ with the highest coefficient (0.80) being recorded for the energy channel of 75~113 keV, the typical particle energies of the ring current belt. Fourth, the particle injection during the recovery phase tends to make the storms longer. It is particularly the case for intense storms. These characteristics observed during the main phase of the magnetic storm indicate that substorm expansion activity is closely associated with the development of mangetic storm.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.103-109
• /
• 2004

The present study prepared 72 test samples - 24 made of amalgam alloy, 24 of Verabond (Ni-Cr alloy) for crown and 24 of Talladium $^{TM}alloy$ for denture - according to the manufacturers' manuals and general method in consideration of the width of the mesial-distal dental crown of the lower $1^{st}$ molar and MOD cavity in clinics, put them in a 200 ml beaker containing 80 ml of artificial saliva, and measured their galvanic corrosion at distances of 0 mm, 7 mm and 40 mm after 7 days. Isolated metals in the electrolyte such as Cu, Ag, Ni, Cr, Sn, Zn and Hg were quantitatively analyzed with Inductively Coupled Plasma - Atomic Emission Spectrometer (ICP-AES, JY-50P, VG Elemental Co. France), and from the results were drawn conclusions as follows. First, Cu, Sn, Ag, Hg and Zn were highly advantageous when amalgam contacted gold alloy compared to Ni-Cr alloy for crown and Talladium alloy for denture. In addition, although gold alloy was finest in terms of oral tissue and biocompatibility, it was most disadvantageous when it was with amalgam. Second, when amalgam contacted gold alloy, heavy metals such as Ni and Cr were not isolated at all because gold alloy did not contain such elements but Sn was isolated as much as $227.1{\pm}18.0035{\mu}g/cm^2$ although it was not included in the composition either. Hg was also isolated. These elements are assumed to have been isolated from amalgam itself. Third, when amalgam alloy was apart from gold alloy 0 mm, 7 mm and 40 mm, Cu and Ag showed significance but Hg did not. This suggests that gold alloy must not be used together with amalgam, and must not be used between dissimilar prostheses regardless of distance. Fourth, when amalgam alloy contacted Ni-Cr alloy for crown, Ag was not isolated from the amalgam, but Zn, Ni, Sn, Hg and Cu were isolated in order of quantity. Significance was observed according to distance - 0 mm, 7 mm and 40 mm. Hg was not isolated but heavy metals Ni and Cr were isolated. If amalgam alloy was in the opposite arch or it was apart from Ni-Cr alloy for crown, the isolation Hg was less than that when amalgam alloy contacted Ni-Cr alloy for crown. Fifth, when amalgam alloy contacted Talladium alloy for denture, significance was observed at distances of 0mm, 7 mm and 40 mm. Hg was not isolated but heavy metals Ni and Cr were isolated. If amalgam alloy was in the opposite arch or it was apart from Talladium alloy for denture, the isolation Hg was less than that when amalgam alloy contacted Talladium alloy for denture. Sixth, according to the result of ICPES test on Cu, Sn, Ag, Hg, Zn, Ni and Cr of amalgam alloy, gold ally, Verabond and Talladium alloy when these alloys contacted artificial saliva, significance was observed in Cu and Hg. Seventh, when amalgam alloy contracted two non-precious metals Ni-Cr alloy for crown and Talladium alloy for denture in artificial saliva, significance was observed in the isolated by-products of Hg, Ni and Cr according to distance.

• Journal of the Korean Chemical Society
• /
• v.52 no.3
• /
• pp.303-314
• /
• 2008

The purpose of this study was to understand the experiment for measuring chemical reaction rate by precipitate formation and to develop experiments applying small-scale chemistry. For this study, the experimental method for measuring the effect of concentration and temperature on chemical reaction rates presented in the 10 high school science textbooks were classified by their experimental methods of confirming production. Subsequently, problems observed in carrying out the experiments for measuring chemical reaction rates by precipitate formation frequently presented in the 10 high school science textbooks were analyzed. Experiments applying small-scale chemistry were developed measuring chemical reaction rate by precipitate formation. According to the result of this study, there were some problems in the experimental method of precipitate formation for measuring chemical reaction rates presented in the high school science textbooks. Those problems in the science textbook experiments were insufficient specification of mixing methods of reaction solutions, obscurity of knowing when the character letter X disappeared, time delay in collecting the experimental data, formation of hazardous sulfur dioxide, uneasiness of fixing water bath container, controlling the reaction temperature, and low reproducibility. Those problems were solved by developing experiments applying smallscale chemistry. Presenting the procedure of mixing reaction solutions on the A4 reaction paper sheet made the experimental procedure clearly, using well plates and stem pipette shortened the reaction time and made it possible to continuously collect the experimental data. Furthermore, the quantity of hazardous sulfur dioxide was reduced 1/7 times and the time when the character letter X disappeared could be observed clearly. Since experiments for measuring the effect of concentration and temperature on chemical reaction rates could be performed in 30 minutes, the developing experiments applying SSC would help students understand the scientific concepts on the effect of concentration and temperature on chemical reaction rates with enough time for experimental data analysis and discussion.