• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.35-42
• /
• 2004

This research describes that the cutting characteristics and tool wear behavior in the micro cutting of three kinds of wear resistant cemented carbides (WC-Co; V40, V50 and V60) using PCD (Poly Crystalline Diamond) and PCBN (Poly crystalline Cubic Boron Nitride) cutting tools by use of the SEM (Scanning Electron Microscope) direct observation method. The purpose of this research is to present reasonable cutting conditions from the viewpoint of high efficient cutting refer to a precise finished surface and tool wear. Summary of the results is as follows: (1) The cutting forces tend to increase as the increase of the weight percentage of WC particles, and the thrust forces was larger than the principal forces in the cutting of WC-Co. These phenomena were different from the ordinary cutting such as cutting of steel or cast iron. (2) The cutting speed hardly influenced the thrust force, because of the frictional force between the cutting tool edge and small WC particles at low cutting speed region such as 2$\mu\textrm{m}$/s. It seemed that the thrust cutting force occurred by the contact between the flank face and work material near the cutting edge. (3) The wear mechanism for PCD tools is abrasion by hard WC particles of the work materials, which leads diamond grain to be detached from the bond. (4) From the SEM direct observation in cutting the WC-Co, it seems that WC particles are broken and come into contact with the tool edge directly. This causes tool wear, resulting in severe tool damage. (5) In the orthogonal micro cutting of WC-Co, the tool wear in the flank face was formed bigger than that in the rake face on orthogonal micro cutting. And the machining surface integrity on the side of the cutting tool with a negative rake angle was better than that with a positive one, as well as burr in the case of using the cutting tool with a negative rake angle was formed very little compared to the that with a positive one.

• Journal of Korea Game Society
• /
• v.16 no.6
• /
• pp.131-142
• /
• 2016

Recently, a variety of methodologies based on the use of educational coding robots have been proposed and experimented in newly emerging korean educational coding markets. Due to imprecise movement accuracy of the existing coding robots, however, such robots are mainly used as a toy. Inspired by these observations, we developed a simple adjustment method during robot movements, which is based on the observation results of 6 line-tracking sensors: 3 sensors in the center of a robot and other 3 sensors at the front. These sensors help to determine whether the robot is in the right location and whether it rotates as expected. Through the well-designed experiments, we report the effectiveness of our proposed solution: the average distance error of 1.57cm and the average degree error of 2.38 degree before and after complex movements. In near future, we hope our method to be popularly used in various educational coding robot platforms.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.200-213
• /
• 2013

As an exploratory research, this paper studied the characteristics of visitor experience in the world first digital aquarium 'IQuarium' by the qualitative observation method. Between June and August of 2013, the first and second qualitative observations were made to gather the data of the behavioral and linguistic responses of visitors. The results of this study were as follows: First, visitors experienced the transformation of their identity and escapism by participating the activities. Second, they experienced the entertaining competition spirit against other visitors for fun. Third, they acted as story-makers by actively participating into the missions. Fourth, they had educational experiences by obtaining information about sea life and experienced the aesthetical atmosphere of 'IQuarium'. Although this study has limitations of the subjective perspective based on qualitative observation method, it will provide proper insight into advanced research in similar fields in the future.

• Atmosphere
• /
• v.24 no.2
• /
• pp.151-158
• /
• 2014

This study investigated a method for the discrimination of precipitation type using thickness of geopotential height at 1000~850 hPa and improved Matsuo's scheme over South Korea using 7 upper-level observations data during winter time from 2003 to 2008. With this research, it was suggested that thickness between snow and rain should range from 1281 to 1297 gpm at 1000~850 hPa. This threshold was suitable for determining precipitation type such as snow, sleet and rain and it was verified by investigation at 7 upper-level observation and 10 surface observation data for 3 years (2009~2011). In addition, precipitation types were separated properly by Matsuo's scheme and its improved one, which is a fuction of surface air temperature and relative humidity, when they lie in mixed sectors. Precipitation types in the mixed sector were subdivided into 5 sectors (rain, rain and snow, snow and rain, snow, and snow cover). We also present the decision table for monitoring and predicting precipitation types using model output of Korea Local Analysis and Prediction System (KLAPS) and observation data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.57-70
• /
• 1997

Conventional procedures to determine vertical deflections and astronomical coordinates require the stellar observations which be under restraints of clear night-time weather conditions, surrounding environment, long observation time and the use of instruments, etc. Therefore the more effective observation method subjugatting these problems has requested. The objective of this study is to propose method to compute vertical deflections, astronomical coordinates(latitude and longitude), and astronomical azimuth by mixing GPS observation results and orthometric heights. For this study, programmed the program which able to obtain the change in geoid undulation by using the GPS- determined geodetic height difference and the orthometric height difference, and GPS satellite surveying was performed at both ten points of astronomical points and four triangulation points around each astronomical station in South Korea. The Astronomical results determined from GPS observations compared to those determined from both conventional astronomical measurements and the recent earth gravitational Model(EGM96).

• Geophysics and Geophysical Exploration
• /
• v.16 no.2
• /
• pp.91-96
• /
• 2013

This study proposes a method to correct inclination of instrument during exploration with a biaxial clinometer and GNSS compass. In 3-component magnetometry, measured vectors are ordinarily described in randomly inclined observation coordinate system due to movement, vibration, and shaking of instrument. Therefore, rotation angles of observation plane are needed to transform it into geodetic coordinate system. In this study, we measured inclination angles of observation plane by using 2-axis clinometer and GNSS compass, and derived proper parameters for rotational transform from them. We applied the conversion method to on-board 3-component magnetometry, and then transformed raw data into proper values on geodetic coordinate system.

• Journal of Environmental Health Sciences
• /
• v.35 no.1
• /
• pp.36-44
• /
• 2009

Hand-washing has been recognized as a critical factor in controlling infection and cross-contamination. This study was performed to investigate hygienic behavior of male university students focusing on awareness of hand-washing, their hand washing practices, and the difference between their awareness and practices. Both a self-administered questionnaire survey and a separate direct observation in restrooms were carried out at a university campus over a four week period. In the survey, 93.6% of the responded students claimed to wash their hands after using toilet. However, just 16.9% of the observed students actually did so, according to a separate and unnoticed observational study. Among the observed students who washed their hands, 25.0% of them used soap, only 5.0% of them washed four parts of their hands, and 15.0% of them washed their hands for more than 10 seconds. Paper towel was the most common hand drying method in the direct observation and also in the survey. Significant differences between the questionnaire survey and the direct observation (p<0.0l) were found in hand-washing practices, duration of hand-washing, using soap, washing parts of the hand, and hand-drying method after using the toilet. This study indicates that there is a remarkable difference between the male university students' awareness of hand-washing and their hand-washing practices. This study reveals that there is the need for programs or campaigns to increase hand-washing practices of male university students.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.257-263
• /
• 2013

In case of image observation equipments, CCTV for short distance visual field is usually installed and operated mostly as the means of crime-prevention. However, the extensive demand for monitoring problems in case of the increase in intelligent crimes and disasters has led to the necessity of the development of long-distance observation equipments embedded with Night View functions. In case of the Night View equipments, the relevant market is set up to be focused mostly on Thermal Observation Device(hereinafter, TOD), but some shortcomings such as the limitation of image visibility and excessive maintenance cost, etc. have actually caused the necessity of new long distance Night View equipment. Moreover there might follow lots of difficulties in long-distance visualization in the event that irregular reflection is generated by minute particles in the atmosphere such as fog, smog, and dust, etc. These factors are motivate the work presented in this study. Our study is aimed at the realization of Pulsed Laser Illuminator and newly proposed Range-Gated image acquisition technology. And also the implementation of Tracker for continuous trace of the objects of interest from the obtained sequence images.

• Journal of Animal Reproduction and Biotechnology
• /
• v.38 no.4
• /
• pp.215-224
• /
• 2023

Background: Reproductive management practices play crucial roles to maximize the reproductive performance of cows, and thus contribute to farm profitability. We aimed to assess the reproductive management of cows currently practiced in the dairy farms in an urban farming system. Methods: A total of 62 dairy farms were randomly selected considering all size of farms such as small (1-5 cattle), medium (6-20 cattle) and large farms (> 20 cattle) from selected areas of Dhaka city in Bangladesh. The reproductive management-related parameters viz. estrus detection, breeding method, pregnancy diagnosis, dry cow and parturition management, vaccination and treatment of reproductive problems etc. were obtained in a pre-defined questionnaire during the farm visit. Results: The visual observation method was only used (100.0%; 62/62) for estrus detection irrespective of size of the farms; while farmers observed cows for estrus 4-5 times a day, but only for 20-60 seconds each time. Regardless of farm size, 89.0% (55/62) farms used artificial insemination (AI) for breeding the cows. Intriguingly, all farms (100.0%) routinely checked the cows for pregnancy at 35-40 days post-breeding using rectal palpation technique by registered veterinarian. However, only 6.5% (4/62) farms practiced dry cow management. Notably, all farms (100.0%) provided nutritional supplements (Vit D, Ca and P) during late gestation. However, proper hygiene and cleanliness during parturition was not practiced in 77.4% (48/62) farms; even though 96.7% (60/62) farms treated cows by registered veterinarian for parturition-related problems. Conclusions: While farmers used AI service for breeding and timely check their cows for pregnancy; however, they need to increase observation time (30 minutes/ observation, twice in a day: early morning and early night) for estrus detection, consider dry cow management and ensure hygienic parturition for maximizing production.

• Particle and aerosol research
• /
• v.19 no.1
• /
• pp.13-20
• /
• 2023

The Asian dust observation network operates β-ray attenuation samplers to measure PM₁₀ concentrations. In addition, equivalence evaluation and accuracy inspection(Precision Tests) are conducted every year for the reliability of data. β-ray attenuation samplers(16 units) were comparatively observed from May to June 2020 and from July to December 2021. During the observation period, the average daily temperature was the lowest at 6.4℃ in December and the highest at 27.3℃ in August. The average daily humidity ranged from 60% to 100%, but the average daily humidity was over 75% from July to September. The minimum value of the PM₁₀ Gravimetric method was 5.0 ㎍/m³, the maximum value was 53.4 ㎍/m³, and the average value was 17.8 ㎍/m³. The equivalence evaluation results of the PM₁₀ Gravimetric method and β-ray attenuation samplers satisfied the criteria (slope: 1±0.1, intercept: 0±0.5). A relative error analysis between the PM₁₀ Gravimetric method and β-ray attenuation samplers equipment showed that the relative error increased when the concentration was low and the temperature and humidity were high. In addition, in the β-ray attenuation samplers 5-minute interval observation data in May 2020, a relatively large Standard devication was shown as an average maximum ±23.4 ㎍/m³ and a minimum ±15.2 ㎍/m³. At standard deviations of 10% and 90%, equipment with high variability (deviation) was measured at 6 ㎍/m³and 61 ㎍/m³, and equipment with low variability was measured at 12 ㎍/m³ and 47 ㎍/m³. It was confirmed that concentration differences occurred due to differences in variability for each equipment.