• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.367-374
• /
• 2005

This paper proposes a sound quality index to evaluate the vehicle interior noise. The index was developed using a correlation analysis of an objective measurement and a subjective evaluation data. First, the objective set of measurements was obtained at two specified driving conditions. One is from a wide-open test condition and the other is from a constant-speed test condition. At the same time, subjective evaluation was carried out using a score of ten scale where 17 test engineers participated in the experiment. The correlation analysis between the psycho-acoustic parameters derived from the objective measurement and the subjective evaluation was performed. The most critical factors at both test conditions were determined, and the corresponding equations for the sound quality were obtained from the multiple factor regression method. Finally, a comparative work between previous index and present index was performed to validate the effectiveness of the proposed index.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.3
• /
• pp.214-222
• /
• 2012

Driver's feeling is variously affected by lots of components such as engine, frame, wheels, and seats during the operation of automobiles. The main objective of this research is to identify the correlation between subjective evaluation and vibration metrics that was set by ISO to investigate development of the car vibration quality index using multiple linear regressions(MLR). A previous research related with automotive vibration quality used the method of calculating acceleration values of the point of a seat, a seat back, foot as RMS for objective evaluation. The automotive comfort is determined by RMS values. In comparison with the previous research, this study includes not only the vibration metrics, but also subjective values by jury evaluation. By indentifying the correlation between subjective evaluation and vibration metrics, the automotive vibration quality index is developed through MLR. Based on the results of this study, the proposed the automotive vibration quality index which developed through MLR will be helpful to obtain objective and reliable automotive comfort values.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.683-688
• /
• 2012

Driver's feeling is variously affected by lots of components such as engine, frame, wheels, and seats during the operation of automobiles. The main objective of this research is to identify the correlation between subjective evaluation and vibration metrics that was set by ISO to investigate development of the car vibration quality index using multiple linear regressions (MLR). A previous research related with automotive vibration quality used the method of calculating acceleration values of the point of a seat, a seat back, foot as RMS for objective evaluation. The automotive comfort is determined by RMS values. In comparison with the previous research, this study includes not only the vibration metrics, but also subjective values by jury evaluation. By indentifying the correlation between subjective evaluation and vibration metrics, the automotive vibration quality index is developed through MLR. Based on the results of this study, the proposed the automotive vibration quality index which developed through MLR will be helpful to obtain objective and reliable automotive comfort values.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.33-40
• /
• 2009

This paper proposes the assessment method for objective quality-evaluation-index of mosaic images. Quality assessment was evaluated using seam-line method and similarity and contrast of adjacent images. The evaluation measure was calculated based on selected evaluation criteria and compared with human visual inspection. It was found that quantitative quality evaluation measure showed that the evaluation results were similar to human visual check. Conclusively experimental results proved that proposed evaluation measure could be used for quantitative and objective quality assessment of mosaic images.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.43-49
• /
• 2006

In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.6
• /
• pp.509-516
• /
• 1991

In this paper, we propose on objective evaluation model of telephone transmission qulity in order to estimate a satisfaction score regarding speech quality in a relephone network. As the degradantion factors of telephone transmission quality, this model takes into account transmission loss, noise, distortion, talker echo and sidetone. A performance index[PI] is introduced for five psychological factors affecting telephone speech qualty, and a Mean Opinion Score(MOS) is estimated from the sum of all Pis. The simulation results indicate theat the MOS obtained from the objective evaluation model is in good agreement with that of subjective evaluation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.427-430
• /
• 2005

The quality of various noises generated in the refrigerator is one of the important factors in deciding quality of the product. The main focus of sound control design has been shifted from reduction of sound level to improvement of sound duality for customer's preference. Up to date the purpose of noise control is the minimization of noise level. However despite of gradual decrease of noise level, occasionally the perceptional quality of noise has not been improved. In this paper, the relation between subjective and objective evaluation of sound quality has established and sound quality index is developed using ANN for evaluation of refrigerator's noise of both the starting noise and the stable running noise of compressor. To verify the usefulness of the index, the results in this paper have been compared with those surveyed by Consumer Union in USA.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.8 s.101
• /
• pp.939-944
• /
• 2005

In this paper, a sound quality index for the evaluation of the vehicle intake noise was developed through a correlation analysis of the objective measurement and the subjective evaluation. First, intake orifice noise was measured at the wide-open throttle sweep condition. And then, the acoustic transfer function between intake orifice noise and interior noise was measured. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 special engineers. The correlation analysis between the psychoacoustic parameters derived from the measurement and the subjective evaluation was performed. The most critical factor was determined and the corresponding sound quality index for intake noise was obtained from the multiple factor regression analysis method. Finally, the effectiveness of the proposed index was validated.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.67-72
• /
• 1991

This paper evaluates thequality of synthesized speech by rule using the LPC CD in the objective measure and then compares the result with the subjective analysis. By evaluating the quality of synthesized speech by rule objectively. We have tried to resolve the problems (Evaluation time or size expansion, variables within the analysis results) that arise when the evaluation is done subjectively. Also by comparing intelligibility-the index for the subjective quality evaluation of synthesized speech by rule-with evaluation results obtained using MOS and the objective evaluation. We have proved the validity of the objective analysis and thus provides a guide that would be useful when R&D and marketing of synthesis by rule method is done.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.377-382
• /
• 2003

In our previous study, we have developed sound quality index for steady rumbling sound of passenger car. In this paper, we will study sound quality index for transient rumbling noise. The subjective evaluation of rumbling sound can be indicated to objective parameters by sound metrics of psychoacoustics and principal rumble component. And artificial neural network can be estimated complexity and nonlinear characteristics of relation between subjective evaluation and sound metrics. We applied to sound metrics and artificial neural network to development of sound quality index for transient rumbling sound of passenger car.