• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1332-1339
• /
• 2001

SoC(System on Chip) technology is widely used in the field of embedded systems by providing high flexibility for a specific application domain. An important aspect of development any new embedded system is verification which usually requires lengthy software and hardware co-design. To reduce development cost of design effort, the instruction set of microprocessor must be suitable for a high level language compiler. And FPGA prototype system could be derived and tested for design verification. In this paper, we propose a 16 bit FPGA microprocessor, which is tentatively-named EISC16, based on an EISC(Extendable Instruction Set Computer) architecture for embedded applications. The proposed EISC16 has a 16 bit fixed length instruction set which has the short length offset and small immediate operand. A 16 bit offset and immediate operand could be extended using by an extension register and an extension flag. We developed a cross C/C++ compiler and development software of the EISC16 by porting GNU on an IBM-PC and SUN workstation and compared the object code size created after compiling a C/C. standard library, concluding that EISC16 exhibits a higher code density than existing 16 microprocessors. The proposed EISC16 requires approximately 6,000 gates when designed and synthesized with RTL level VHDL at Xilinix's Virtex XCV300 FPGA. And we design a test board which consists of EISC16 ROM, RAM, LED/LCD panel, periodic timer, input key pad and RS-232C controller. 11 works normally at 7MHz Clock.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.10
• /
• pp.377-382
• /
• 2018

This study deals with internal state and tissue density analysis methods for red ginseng grade determination. For internal measurement of red ginseng, there have been various studies on nondestructive testing methods since the 1990s, It was difficult to grasp the most important inner hole and inside whites in the grading. So in this study, we developed a closed capturing device for infra-red illumination environment, and developed an internal measurement system that can detect the presence and diameter of inner hole and inside whites. Made devices consisted of infrared lights with a high transmission rate of red ginseng in 920 nanometer wave band, a infra-red camera and a Y axis actuator with a red ginseng automatically controlled focus on the camera. The proposed algorithm performs an auto-focus system on the Y-axis actuator to automatically adjust the sharp focus of the object according to the size and thickness. Then red ginseng is rotated $360^{\circ}$ at $1^{\circ}$ intervals and 360 total images are acquired, and reconstructed as a sinogram through Radon transform and Back-projection algorithm was performed to acquire internal images of red ginseng. As a result of the algorithm, it was possible to acquire internal cross-sectional image regardless of the thickness and shape of red ginseng. In the future, if more than 10,000 different shapes and sizes of red ginseng internal cross-sectional image are acquired and the classification criterion is applied, it can be used as a reliable automated ginseng grade automatic measurement method.

• Water for future
• /
• v.29 no.5
• /
• pp.185-202
• /
• 1996

The newly-developed method for estimating the instream flow, proposed by the authors (1996), was applied to the main channel reach of the Kum River basin in Korea. Performance of the suggested method was tested through the evaluations of the required flow, instream flow, and river-management flow which were estimated at five main reaches with each representative station. The mean drought flow was used as the object flow to evaluate the minimum instream flow for the mid- and large-size rivers. Water quality prediction by using the QUAL2E model was made for both cases that the planned wastewater treatment facilities may and may not be constructed. The required flow for the fish habitat was evaluated for 9 representative fish species. The instream flows required for the riverine aesthetics at Kong-ju and Puyo scenary points, for river navigation at natural channel conditions, and for current and potential recreation activities were evaluated, respectively. The instream flows required for other items are not quantified. On the whole, it is shown that the instream flow to maintain the natural riverine functions such as fish habitat, and riverine aesthetics govern the upstream reaches of the Kum River, and the artificial riverine functions such as conservation of water quality, navigation and recreations govern the middle and downstream reaches. Especially, it is found that the instream flow requirement depends largely upon the construction of wastewater treatment facilities at the Kum River basin.

• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.471-482
• /
• 2006

In this paper, we propose a new scheme to generate multi-view images utilizing depth map decomposition and adaptive edge smoothing. After carrying out smooth filtering based on an adaptive window size to regions of edges in the depth map, we decompose the smoothed depth map into four types of images: regular mesh, object boundary, feature point, and number-of-layer images. Then, we generate 3-D scenes from the decomposed images using a 3-D mesh triangulation technique. Finally, we extract multi-view images from the reconstructed 3-D scenes by changing the position of a virtual camera in the 3-D space. Experimental results show that our scheme generates multi-view images successfully by minimizing a rubber-sheet problem using edge smoothing, and renders consecutive 3-D scenes in real time through information decomposition of depth maps. In addition, the proposed scheme can be used for 3-D applications that need the depth information, such as depth keying, since we can preserve the depth data unlike the previous unsymmetric filtering method.

• Journal of the Korean Chemical Society
• /
• v.61 no.3
• /
• pp.112-121
• /
• 2017

The purpose of the study was to investigate the effect of explanation in conjunction with gravity and density on students' alternative conceptions for floating and sinking phenomena. The subjects were 140 students of 11th grade in 4 classes of a high school located in Gangwon Province. We divided them in two groups; comparison and experiment. The students of experiment group learned explanation in confection with gravity and density. The students of comparison group learned explanation of pressure as represented in physics textbook. ANCOVAs (analysis of covariance) were conducted using the pretest as a covariance. In items related to characters of matter, 2 items are not significant and only 1 item has significant small effect size (Hedges' g=0.327). In the change of alternative conceptions, there is no meaningful gap between two group. However, in items related to relative weights between object and water, the all items have significant effect sizes (0.286~0.502). In addition, frequency of experiment group's alternative conceptions related to pressure decreases considerably, but comparison group does not. Therefore, the explanation in conjunction with gravity and density suggested in this study can decrease students' alternative conceptions related to floating and sinking phenomena and increase scientific conceptions.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.2
• /
• pp.203-225
• /
• 2004

The purpose of this paper analyzes the characteristics of economic space in Gyeonggi border regions. Especially, this study focuses on understanding the environment enveloped the enterprises because today, largely influenced factor for regional economic development is enterprises. Since 1990's the change of the spacial organization in Korean Capital region has been inducing the functional transformation in Gyeonggi border regions so that new function -beyond military functions- is developed in these regions. By the disindustrialization in core region contributed to the industrialization in periphery, border regions are developed as a concentrated space of traditional industries and small size manufactural firms. The most important pull factor is facility for obtain a factory site and favorable condition of land price. Globally, the reasons to locate enterprise in these regions are found not in positive and progressive strategies but in passive and defensive strategies. Therefore few enterprise carried about influences of economic cooperation between North and South Korea at the moment of decision of their site. The survey reveal that enterprises didn't highly estimate the environment in border regions as their business activities. The first dissatisfied condition is insufficiency of labour and difficulty of access for administrative and high level services, due to geographical separation. Considering the recent tendency of spacial reorganization in Capital region is not always good for border regions, border regions have to employ a policy with the object of ameliorating regional business environments and growing up a potentiality of endogenous development.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2661-2667
• /
• 2013

Recently, at Home and abroad, Internet of Things era things(Thing) is participating as a subject of communication in human communication paradigm of existing (lot/M2M) is in full swing. Automobile, refrigerator, bicycle, until shoes, and communication functions generation of information is installed and has created a fusion of new service IT infrastructure. Its use and application are broadening to various areas and the number of devices used for it is increasing to increase the number of information transmitted for each object. When the traffic reaches its limit while each set of data is transmitted from the devices divided into each group through the mobile network, M2M communications service might not be processed smoothly. This study used the Knapsack Problem algorithm to create a virtual simulator for a smooth M2M service when the mobile network used for the M2M communications reaches its limit. The virtual simulator applies smooth processing of services from the M2M communications that should be processed first to other subsequent services when data comes to each group of devices. As the M2M technology develops to make many objects more compact in size, it would help with smoother processing of M2M services for the mobile network with fast-increasing traffic.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.525-529
• /
• 2015

Depending on the field of smart industry has become increasingly widespread, the digital signage industry as advertising and content industry is emerging. However, this industry is growing rapidly it is not the reason for that is lack of a legal definition or system. The current legal system merely existing laws that apply to the use of outdoor advertising such as advertising and outdoor advertising Electrical, according to a separate law on digital signage is still is not enough. Most of the current legal system between a size that it is put in the control object, its type, the installation location and details and locations of areas in accordance with the regulation member of the law which can reduce the effectiveness of such a business to control them collectively There is concern that the differences are caused by unification can be difficult. In reality, the institutions of the new law was necessary, organized under the existing regulation rather than promoting new laws to screen the effectiveness of the national business media industry through a kind of standardization and unification of the digital signage industry in the future creation of a jurisdiction other than safety administration Science It is important to foster.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.108-108
• /
• 2009

The main object of this research is to minimize the shock effects which frequently result in fatal damage in wind met mast on impact of barge. The collision between wind met mast and barge is generally a complex problem and it is often not practical to perform rigorous finite element analyses to include all effects and sequences during the collision. LS-dyna generally purpose explicit finite element code, which is a product of ANSYS software, is used to model and analyze the non-linear response of the met mast due to barge collision. A significant part of the collision energy is dissipated as strain energy and except for global deformation modes, the contribution from elastic straining can normally be neglected. On applying impact force of a barge to wind met mast, the maximum acceleration, internal energy and plastic strain were calculated for each load cases using the finite element method and then compare it, varying to the velocity of barge, with one varying to the thickness of rubber fender conditions. Hence, we restrict the present research mainly to the wind met mast and also parametric study has been carried out with various velocities of barge, thickness of wind met mast, thickness and Mooney-Rivlin coefficient of rubber fender with experimental data. The equation of motion of the wind met mast is derived under the assumption that it was ignored vertical movement effect of barge on sea water. Such an analyzing method which was developed so far, make it possible to determine the proper size and material properties of rubber fender and the optimal moving conditions of barge, and finally, application method can be suggested in designing process of rubber fender considering barge impact.

• Korean Journal of Childcare and Education
• /
• v.7 no.3
• /
• pp.189-209
• /
• 2011

The purpose of this study is to offer a basic material for developing a supervision program of a child-care center and to improve quality in the field of the child-care center by researching child-care teachers' perception & real condition and problems on the development and its improvement, necessity, demand about the scholarship program. An object of this study was randomly selected 230 staffs working for the child-care center located in Busan metropolitan and Kyoungnam province. A methodology of this study is using a questionnaire made by writer with referring to the preliminary study which is associated with a supervision program of child-care center in order to research child-care teachers' perception and demands on the development of a supervision program. The collected material was analyzed by a PASW 18.0 statistics program. The result of this study is that firstly, a perception of the supervision program was shown "know somewhat" the highest and as a result of researching the real condition of training and follow-up course for child-care teachers, "never educated" was the highest. Secondly, as a result of researching a perception of the problem on the development of supervision program, "unreflected-in-sound" was the highest. Thirdly, as a result of researching the differences of necessity on the development of a scholarship program for a child-care center according to some factors, there existed meaningful differences statistically in terms of the class size, but there existed no difference in terms of the type of organization, institution type, academic background.