• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1367-1371
• /
• 2004

In this paper, we propose a method and condition of locating the position of an object in one dimension by using the phase difference of arrival(PDOA), To get a phase difference, the comparator of a wayside radio station(WRS) compares the reference signal with the received signal, Therefore, we can locate the position of a moving object. Finally, by using the simulation of a computer we analyze their values.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.77-81
• /
• 2014

This paper propose a method to detect moving object and locating in real time from video sequence. first the proposed method extract moving object by differencing two consecutive frames from the video sequence. If the interval between captured two frames is long, it cause to generate fake moving object as tail of the real moving object. secondly this paper proposed method to overcome this problem by using doppler effects and HSV color model. finally the object segmentation and locating is done by combining the result that obtained from steps above. The proposed method has 99.2% of detection rate in practical and also this method is comparatively speed than other similar methods those proposed in past. Since the complexity of the algorithm is directly affects to the speed of the system, the proposed method can be used as low complexity algorithm for real time moving object detection.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.3981-4004
• /
• 2019

This paper proposes a novel method for locating objects in real space from a single remote image and measuring actual distances between them by automatic detection and perspective transformation. The dimensions of the real space are known in advance. First, the corner points of the interested region are detected from an image using deep learning. Then, based on the corner points, the region of interest (ROI) is extracted and made proportional to real space by applying warp-perspective transformation. Finally, the objects are detected and mapped to the real-world location. Removing distortion from the image using camera calibration improves the accuracy in most of the cases. The deep learning framework Darknet is used for detection, and necessary modifications are made to integrate perspective transformation, camera calibration, un-distortion, etc. Experiments are performed with two types of cameras, one with barrel and the other with pincushion distortions. The results show that the difference between calculated distances and measured on real space with measurement tapes are very small; approximately 1 cm on an average. Furthermore, automatic corner detection allows the system to be used with any type of camera that has a fixed pose or in motion; using more points significantly enhances the accuracy of real-world mapping even without camera calibration. Perspective transformation also increases the object detection efficiency by making unified sizes of all objects.

• Korean Journal of Cognitive Science
• /
• v.10 no.1
• /
• pp.45-55
• /
• 1999

This paper argues that the basic modes of spatial cognition can be best identified in terms of argument/participant location, and shows that natural language uses‘simple’types of semantic denotations to encode spatial cognition, and further notes that spatial expressions should be interpreted not as locating an event/state as a whole but as locating arguments/participants of the event. The ways of locating events/states are identified in terms of argument orientation(AO), Which indicates semantic patterns of linkiarticipant location. and shows that natural langrage uses ng locatives to specific arguments. Four patterns of argument orientation described here reveal substantial modes of spatial cognition. and the AO patterns are mostly determined by the semantic classes of English verbs combining with locative expressions, i.e., by the event type of the predicate. As for the denotational constraint of locatives, the paper concludes that semantic denotations of locative PPs are restricted to the intersecting functions mapping relations to relations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.159-166
• /
• 2008

Recently, according to the rapid development of location positioning technology and wireless communications technology and increasement of usage of moving object data, many researches and developments on the real-time locating systems which provides real time service of moving object data stream are under proceeding. However, MO (Moving Object) DBMS used based system in the in these systems is the inefficient management of moving object data streams, and the existing DSMS (Data Stream Management System) has problems that spatio-temporal data are not handled efficiently. Therefore, in this thesis, we designed and implemented spatio-temporal DSMS for efficient real-time management of moving object data stream. This thesis implemented spatio-temporal DSMS based STREAM (STanford stREam dAta Manager) of Stanford University is supporting real-time management of moving object data stream and spatio-temproal query processing and filtering for reduce the input loading. Specifically, spatio-temporal operators of the spatio-temporal DSMS support standard interface of SQL form which extended "Simple Feature Specification for SQL" standard specifications presented by OGC for compatibility. Finally, implemented spatio-temporal DSMS in this thesis, proved the effectiveness of the system that as applied real-time monitoring areas that require real-time locating of object data stream DSMS.

• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.3
• /
• pp.125-132
• /
• 2012

This paper proposes an automatic object segmentation and background composition method for video communication over consumer mobile phones. The object regions were extracted based on the motion and color variance of the first two frames. To combine the motion and variance information, the Euclidean distance between the motion boundary pixel and the neighboring color variance edge pixels was calculated, and the nearest edge pixel was labeled to the object boundary. The labeling results were refined using the morphology for a more accurate and natural-looking boundary. The grow-cut segmentation algorithm begins in the expanded label map, where the inner and outer boundary belongs to the foreground and background, respectively. The segmented object region and a new background image stored a priori in the mobile phone was then composed. In the background composition process, the background motion was measured using the optical-flow, and the final result was synthesized by accurately locating the object region according to the motion information. This study can be considered an extended, improved version of the existing background composition algorithm by considering motion information in a video. The proposed segmentation algorithm reduces the computational complexity significantly by choosing the minimum resolution at each segmentation step. The experimental results showed that the proposed algorithm can generate a fast, accurate and natural-looking background composition.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4386-4404
• /
• 2016

Most existing salient object detection algorithms commonly employed segmentation techniques to eliminate background noise and reduce computation by treating each segment as a processing unit. However, individual small segments provide little information about global contents. Such schemes have limited capability on modeling global perceptual phenomena. In this paper, a novel salient object detection algorithm is proposed based on region merging. An adaptive-based merging scheme is developed to reassemble regions based on their color dissimilarities. The merging strategy can be described as that a region R is merged with its adjacent region Q if Q has the lowest dissimilarity with Q among all Q's adjacent regions. To guide the merging process, superpixels that located at the boundary of the image are treated as the seeds. However, it is possible for a boundary in the input image to be occupied by the foreground object. To avoid this case, we optimize the boundary influences by locating and eliminating erroneous boundaries before the region merging. We show that even though three simple region saliency measurements are adopted for each region, encouraging performance can be obtained. Experiments on four benchmark datasets including MSRA-B, SOD, SED and iCoSeg show the proposed method results in uniform object enhancement and achieve state-of-the-art performance by comparing with nine existing methods.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.545-550
• /
• 2011

Trilateration is a typical method to locate an object, which requires inherently at least three prerecognized reference points. In some cases, owing to out of reachability to communication facilities the target node cannot be reachable always to three base stations. This paper presents a predictive method, which can identify the location of a moving target node in real time even though the target node could not get in touch with all three base stations. The method is based on the PIDcontrolled Moving Objects Spatio-Temporal Model Algorithm. Simulation results verify that this method can predict the moving direction of a moving target, and then combine with its past position information to judge accurately the location.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.60-63
• /
• 2000

In this study, efficient force reflection algorithm is developed for the Haptic Display by using a proxy concept and friction model. When there are not any contacted obstacles the proxy is following human operator's command trajectory in the 3D virtual space. But when the operator's command trajectory is locating inside of the object, the proxy is constrained by the surface of the object. Here only with the information of the proxy position and operator's command trajectory at every time step, we can calculate the reflection force and its orientation. To display the friction force between two virtual stiff material which are sliding against each other, modified Karnopp's friction model is used. In the friction model, a damping term and a Stribeck effect term are included to display the relative velocity effect and stick-slip effect at the very low relative velocity region respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.145-152
• /
• 2010

With the recent development of the ubiquitous computing technology, there are increasing interest and research in technologies such as sensors and RFID related to information recognition and location positioning in various ubiquitous fields. Especially, RTLS(Real-Time Locating Services) dealing with spatio-temporal data is emerging as a promising technology. For these reasons, the ISO/IEC published the RTLS standard specification for compatibility and interoperability in RTLS. Therefore, in this paper, we designed and implemented Spatio-temporal Query Processing Systems for efficiently managing and searching the incoming Spatio-temporal data stream of moving objects. Spatio-temporal Query Processing Systems's spatio-temporal middleware maintains interoperability among heterogeneous devices and guarantees data integrity in query processing through real time processing of unceasing spatio-temporal data streams and two way synchronization of spatio-temporal DBMSs. Web Server uses the SOAP(Simple Object Access Protocol) message between client and server for interoperability and translates client's SOAP message into CQL(Continuous Query Language) of the spatio-temporal middleware. Finally, this thesis proved the utility of the system by applying the spatio-temporal Query Processing Systems to a real-time Locating Services.