• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.72-80
• /
• 2005

The number of apartments has been increased, and it is time to activate the remodeling or reconstruction. Recently remodeling has been preferred to reconstruction, because reconstruction might cause many problems. At this point of time, remodeling could save resources, preserve environment, and expand the construction market places. However, most research for remodeling is aimed to improve the financial value, and structural effects being caused by floor plan modification has not been done yet quantitatively. Remodeling naturally brings to floor plan modification, and it can cause serious problems of structural side. So we made apartments an object of study, then analyzed stress variation of structural elements according to the removal of shear wall, supposing the floor plan modification. For this purpose, we selected a sample of universal apartment floor plan and extracted floor plan modification factors. Then we applied the factors to sample floor plan and organized the results of stress variation of structural elements. As results, walls are most harmful when the independent walls are removed, and in case of slabs, it is most critical when continuous walls are removed.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1787-1793
• /
• 2018

Shadow is a common phenomenon observed in natural scenes, but it has a negative influence on image analysis such as object recognition, feature detection and scene analysis. Therefore, the process of detecting and removing shadows included in digital images must be considered as a pre-processing process of image analysis. In this paper, the existing methods for acquiring 1D invariant images, one of the feature elements for detecting and removing shadows contained in a single natural image, are described, and a method for obtaining 1D invariant images based on linear regression has been proposed. The proposed method calculates the log of the band-ratio between each channel of the RGB color image, and obtains the grayscale image line by linear regression. The final 1D invariant images were obtained by projecting the log image of the band-ratio onto the estimated grayscale image line. Experimental results show that the proposed method has lower computational complexity than the existing projection method using entropy minimization, and shadow detection and removal based on 1D invariant images are performed effectively.

• Journal of KIBIM
• /
• v.10 no.4
• /
• pp.32-39
• /
• 2020

In recent years, the construction industry is getting bigger and more complex, so it is becoming difficult to acquire point cloud data for construction equipments and workers. Point cloud data is measured using a drone and MMS(Mobile Mapping System), and the collected point cloud data is used to create a 3D digital map. In particular, the construction site is located at outdoors and there are many irregular terrains, making it difficult to collect point cloud data. For these reasons, adopting a noise reduction algorithm suitable for the characteristics of the construction industry can affect the improvement of the analysis accuracy of digital maps. This is related to various environments and variables of the construction site. Therefore, this study reviewed and analyzed the existing research and techniques on the noise reduction algorithm. And based on the results of literature review, performance evaluation of major noise reduction algorithms was conducted for digital maps of construction sites. As a result of the performance evaluation in this study, the voxel grid algorithm showed relatively less execution time than the statistical outlier removal algorithm. In addition, analysis results in slope, space, and earth walls of the construction site digital map showed that the voxel grid algorithm was relatively superior to the statistical outlier removal algorithm and that the noise removal performance of voxel grid algorithm was superior and the object preservation ability was also superior. In the future, based on the results reviewed through the performance evaluation of the noise reduction algorithm of this study, we will develop a noise reduction algorithm for 3D point cloud data that reflects the characteristics of the construction site.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.479-493
• /
• 2016

LiDAR(Light Detection and Ranging) data acquired from ALS(Airborne Laser Scanner) has been intensively utilized to reconstruct object models. Especially, researches for 3D modeling from LiDAR data have been performed to establish high quality spatial information such as precise 3D city models and true orthoimages efficiently. To reconstruct object models from irregularly distributed LiDAR point clouds, sensor calibration, noise removal, filtering to separate objects from ground surfaces are required as pre-processing. Classification and segmentation based on geometric homogeneity of the features, grouping and representation of the segmented surfaces, topological analysis of the surface patches for modeling, and accuracy assessment are accompanied by modeling procedure. While many modeling methods are based on the segmentation process, this paper proposed to extract key points directly for building modeling without segmentation. The method was applied to simulated and real data sets with various roof shapes. The results demonstrate feasibility of the proposed method through the accuracy analysis.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.341-344
• /
• 2005

This research was performed for developing of biological treatment process of odor gas such as MEK, $H_2S$, and toluene, which was generated from the food waste recycling process. To establish the operational conditions of odor gas removal by small-scale biofiltration equipment, it was continuously operated by using toluene as a treating odor object. When the odor treating microorganisms were adhered to fibril form biofilter, high removal efficiency over $93\%$ was obtained by biofilm formation. At 400 ppm of inlet odor gas concentration and 10 sec of retention time, the removal efficiency was $76\%$ and $93\%$ in 1 st stage reactor and End stage reactor, respectively. However, the removal efficiency remained over $97\%$ at the operational conditions above 15 sec of retention time.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.2
• /
• pp.129-152
• /
• 2024

In the application of deep learning object detection via CCTV in tunnels, a large number of false positive detections occur due to the poor environmental conditions of tunnels, such as low illumination and severe perspective effect. This problem directly impacts the reliability of the tunnel CCTV-based accident detection system reliant on object detection performance. Hence, it is necessary to reduce the number of false positive detections while also enhancing the number of true positive detections. Based on a deep learning object detection model, this paper proposes a false positive data training method that not only reduces false positives but also improves true positive detection performance through retraining of false positive data. This paper's false positive data training method is based on the following steps: initial training of a training dataset - inference of a validation dataset - correction of false positive data and dataset composition - addition to the training dataset and retraining. In this paper, experiments were conducted to verify the performance of this method. First, the optimal hyperparameters of the deep learning object detection model to be applied in this experiment were determined through previous experiments. Then, in this experiment, training image format was determined, and experiments were conducted sequentially to check the long-term performance improvement through retraining of repeated false detection datasets. As a result, in the first experiment, it was found that the inclusion of the background in the inferred image was more advantageous for object detection performance than the removal of the background excluding the object. In the second experiment, it was found that retraining by accumulating false positives from each level of retraining was more advantageous than retraining independently for each level of retraining in terms of continuous improvement of object detection performance. After retraining the false positive data with the method determined in the two experiments, the car object class showed excellent inference performance with an AP value of 0.95 or higher after the first retraining, and by the fifth retraining, the inference performance was improved by about 1.06 times compared to the initial inference. And the person object class continued to improve its inference performance as retraining progressed, and by the 18th retraining, it showed that it could self-improve its inference performance by more than 2.3 times compared to the initial inference.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1120-1128
• /
• 2022

In the event of a marine accident, the longer the exposure time to the sea increases, the faster the chance of survival decreases. However, because the search area of the sea is extremely wide compared to that of land, marine object detection technology based on the sensor mounted on a satellite or an aircraft must be applied rather than ship for an efficient search. The purpose of this study was to rapidly detect an object in the ocean using a hyperspectral image sensor mounted on an aircraft. The image captured by this sensor has a spatial resolution of 8,241 × 1,024, and is a large-capacity data comprising 127 spectra and a resolution of 0.7 m per pixel. In this study, a marine object detection model was developed that combines a seawater identification algorithm using DBSCAN and a density-based land removal algorithm to rapidly analyze large data. When the developed detection model was applied to the hyperspectral image, the performance of analyzing a sea area of about 5 km² within 100 s was confirmed. In addition, to evaluate the detection accuracy of the developed model, hyperspectral images of the Mokpo, Gunsan, and Yeosu regions were taken using an aircraft. As a result, ships in the experimental image could be detected with an accuracy of 90 %. The technology developed in this study is expected to be utilized as important information to support the search and rescue activities of small ships and human life.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.3
• /
• pp.168-174
• /
• 2017

Videos recorded on surveillance cameras or by car black boxes at night have distorted images due to illumination variation. Therefore, it is difficult to analyze morphological characteristics of objects, and it is limiting to use such distorted images as evidence in traffic accidents. Image restoration is performed by amplifying the brightness of nighttime images using linearized gamma correction to increase their contrast (which destroys visual information) and by minimizing degradation factors caused by irregular traveling.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.505-507
• /
• 1998

상속은 객체 지향 원리에서 만의 특성으로 추상화 레벨을 높여주고, 소프트웨어의 재사용을 강력히 지원하며, 대체 원리를 따른다. 또한 유지 보수의 용이성, 신뢰성등의 잇점을 제공한다. 그러나 측정 결과에 따르면 상속 계층이 깊어질수록 재사용이 어렵다고 조사되었으며 이는 재사용뿐아니라 개발에 있어서도 장애의 요인이 된다. 상속의 깊이를 최소화하기 위해서는 우선 상속 계층에서 직접적, 또는 간접적으로 사용되는 instance variable과 method만을 제외하고는 모두 삭제되어야 한다. 그러나, 다형성이 적용된 클래스는 정적(static) 분석이 불가능하므로 다형성을 제거하되, 다형성이 적용되었을 때와 동일한 모든 state, 기능 및 동작이 유지된 상태에서 처리되어야 한다. 다형성이 제거될 때 구현의 세부 사항은 변경하지 않음으로써 black box의 이점을 살린다. 다중상속의 경우는 각각의 상속 경로에 대하여 동일한 처리를 반복 수행하여 결과를 얻을 수 있으며, instance variable과 method의 access 레벨에 따라 처리 방법이 조금씩 달라진다. 본 논문에서는 C++에서의 다형성과 불필요한 instance variable과 method의 제거알고리즘에 대하여 논한다.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.736-739
• /
• 2006

While hyperspectral data are very rich in information, their processing poses several challenges such as computational requirements, noise removal and relevant information extraction. In this paper, the application of advanced scale-space filtering to selected hyperspectral bands was investigated. In particular, a pre-processing tool, consisting of anisotropic diffusion and morphological leveling filtering, has been developed, aiming to an edge-preserving smoothing and simplification of hyperspectral data, procedures which are of fundamental importance during feature extraction and object detection. Two scale space parameters define the extent of image smoothing (anisotropic diffusion iterations) and image simplification (scale of morphological levelings). Experimental results demonstrated the effectiveness of the developed scale space filtering for the enhancement and smoothing of hyperspectral remote sensing data and their advantage against watershed over-segmentation problems and edge detection.