• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.557-564
• /
• 2014

In this study, we present an algorithm that conducts an unique naming process for the bridge object through the solid object identification focused on 3D straight bridge model. For the recognition of 3D objects, the numerical algorithm utilizes centroid point, and solid object on the local coordination system. It classifies the object feature set by classifying the objects and members based on the bridge direction. By doing so, unique names, which contain the information about span, members and order of the object, were determined and the suitability of this naming algorithm was examined through a truss bridge model and a bridge model with different coordinate systems. Also, the naming process based on the object feature set was carried out for the real 3D bridge model and then was applied to the module on local server and mobile device for real bridge inspection work. From the comparison of the developed naming algorithm based on object identification and the conventional one based on field inspection, it was shown that the conventional field inspection work can be effectively improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2419-2424
• /
• 2013

In a conventional MOG algorithm, a small threshold for background decision causes the background recognition delay in a periodic background and a large threshold makes it recognize passing objects as background in a stationary background. This paper proposes the improved MOG algorithm using adaptive threshold. The proposed algorithm estimates changes of weight in the dominant model of the MOG algorithm both in the short and long terms, classifies backgrounds into the stationary and periodic ones, and assigns proper thresholds to them. The simulation results show that the proposed algorithm decreases the maximum number of frame in background recognition delay from 137 to 4 in the periodic background keeping the equal performance with the conventional algorithm in the stationary background.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.314-320
• /
• 1998

Wear debris morphology is closely related to the wear mode and mechanism occured. Image recognition of wear debris is, therefore, a powerful tool in wear monitoring. But it has usually required expert's experience and the results could be too subjective. Development of automatic tools for wear debris recognition is needed to solve this problem. In this work, an algorithm for automatic wear debris recognition was suggested and implemented by PC base software. The presented method defined a characteristic 3-dimensional feature space where typical types of wear debris were separately located by the knowledge-based system and compared the similarity of object wear debris concerned. The 3-dimensional feature space was obtained from multiple feature vectors by using a multi-dimensional scaling technique. The results showed that the presented automatic wear debris recognition was satisfactory in many cases application.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.420-425
• /
• 2003

Generally, reverse engineering means getting CAD data from unidentified shape using vision or 3D laser scanner system. In this paper, we studied unidentified model by machine vision based reverse engineering system to get information about in-processing model. Recently, vision technology is widely used in current factories, because it could inspect the in-process object easily, quickly, accurately. The following tasks were mainly investigated and implemented. We obtained more precise data by corning camera's distortion, compensating slit-beam error and revising acquired image. Much more, we made similar curves or surface with B-spline approximation for precision. Until now, there have been many case study of shape recognition. But it was uncompatible to apply to the field, because it had taken too many processing time and has frequent recognition failure. This paper propose recognition algorithm that prevent such errors and give applications to the field.

• Tribology and Lubricants
• /
• v.15 no.2
• /
• pp.206-211
• /
• 1999

Wear debris morphology is closely related to the wear mode and mechanism occured. Image recognition of wear debris is, therefore, a powerful tool in wear monitoring. But it has usually required expert's experience and the results could be too subjective. Development of automatic tools for wear debris recognition is needed to solve this problem. In this work, an algorithm for automatic wear debris recognition was suggested and implemented by PC base software. The presented method defined a characteristic 3-dimensional feature space where typical types of wear debris were separately located by the knowledge-based system and compared the similarity of object wear debris concerned. The 3-dimensional feature space was obtained from multiple feature vectors by using a multi-dimensional scaling technique. The results showed that the presented automatic wear debris recognition was satisfactory in many cases application.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.957-966
• /
• 2019

This paper studies a novel approach to natural gait cycles based gait recognition via kernel Fisher discriminant analysis (KFDA), which can effectively calculate the features from gait sequences and accelerate the recognition process. The proposed approach firstly extracts the gait silhouettes through moving object detection and segmentation from each gait videos. Secondly, gait energy images (GEIs) are calculated for each gait videos, and used as gait features. Thirdly, KFDA method is used to refine the extracted gait features, and low-dimensional feature vectors for each gait videos can be got. The last is the nearest neighbor classifier is applied to classify. The proposed method is evaluated on the CASIA and USF gait databases, and the results show that our proposed algorithm can get better recognition effect than other existing algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109.2-109
• /
• 2001

In the PCB assembly lines, as components become more complex and smaller, the conventional inspection method using traditional ICT and function test show their limitations in application. The automatic optical inspection(AOI) gradually becomes the alternative in the PCB assembly line. In Particular, the PCB inspection machines need more reliable and flexible object recognition algorithms for high inspection accuracy. The conventional AOI machines use the algorithmic approaches such as template matching, Fourier analysis, edge analysis, geometric feature recognition or optical character recognition (OCR), which mostly require much of teaching time and expertise of human operators. To solve this problem, in this paper, a statistical learning based part recognition method is proposed. The performance of the ...

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.3
• /
• pp.143-150
• /
• 2008

In this paper, we investigate a real-time environment recognition system based on stereo vision for moving object. This system consists of stereo matching, obstacle detection and distance estimation. In stereo matching part, depth maps can be obtained real road images captured adjustable baseline stereo vision system using belief propagation(BP) algorithm. In detection part, various obstacles are detected using only depth map in case of both v-disparity and column detection method under the real road environment. Finally in estimation part, asymmetric parabola fitting with NCC method improves estimation of obstacle detection. This stereo vision system can be applied to many applications such as unmanned vehicle and robot.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.1
• /
• pp.39-44
• /
• 2002

In this paper, implementation mode image segmentation method for separate image is presented. The method of segmentation image in conventional method, the error are generated by the threshold values. To improve these problem for segmentation image, the calculation of weighting factor using brightness distribution by histogram of stored images are proposed. For safe image of object and laser image, the computed weighting factor is set to the threshold value. Therefore the image erosion and spread are improved, the correct and reliable informations can be measured. In this paper, the system of 3-D extracting information using the proposed algorithm can be applied to manufactory automation, building automation, security guard system, and detecting information system for all of the industry areas.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1180-1187
• /
• 2018

This paper had implemented the underwater stage through interaction with fish robots and visitors in the background of traditional fairy tales using 3D floating hologram in an aquarium. The recognition of the object position of the spectator and the underwater robot were performed using the color recognition algorithm. Also, the position tracking algorithm was proposed to follow the object of the visitor and the original fairy tale. This experimental system consists of fish robot, camera, KIOSK for underwater robot control and beam project for underwater imaging. This experiment was carried out by the National Busan Science Museum, and it had satisfied the performance of the underwater stage.