• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.258-267
• /
• 2017

In this study, pitch pine (Pinus rigida, PIR) and Mongolian oak (Quercus mongolica, QUM) pellets were fabricated with bark or/and drying waste liquor (DWL) of larch (Larix kaempferi, LAK) as an additive. Based on the results of fuel characteristics of the pellets, optimal conditions for producing the high-quality pellets were provided. In the analysis of chemical composition, bark contained holocelluose and lignin of 90% and over. DWL had 0.1% solid assumed to sugars which are generated from the oven-drying of LAK logs. QUM showed high ash content (2.2%) by containing of bark in the sawdust. Bark and DWL of LAK had high ash content of 4% and over. Calorific values of all specimens and additives were higher than that of the $1^{st}$-grade standard of wood pellets designated by NIFOS (18.0 MJ/kg). PIR and QUM pellets were fabricated with additive of 2 wt% based on the solid weight of oven-dried sawdust using a piston-type flat-die pelletizer, and thus ash content and calorific value of the pellets did not affect by the use of additive. Durability of the pellets increased with the use of additive. Durabilties of pellets, which were fabricated with bark as an additive and DWL as a controller of moisture content for sawdust, did not differ from those of pellets without additives and were lower than those of pellets either with bark or DWL. However, use of both bark and DWL for the production of wood pellets might be favorable because it can make a profit from the collection process of DWL. Based on the results of fuel characteristics of the pellets, QUM and PIR pellets were produced by a flat-die pelletizer. Moisture content (MC), bulk density and durability of the pellets improved with the use of additive. Particularly, sawdust MC of 10% and the addition of bark or DWL for PIR as well as sawdust MC of 12% and the addition of bark for QUM might be optimal conditions for the production of high-quality pellets. Except for the ash content of QUM pellets, other properties of PIR and QUM pellets exceeded the $1^{st}$-grade wood pellets standards of NIFOS.

• Mycobiology
• /
• v.28 no.4
• /
• pp.180-184
• /
• 2000

In order to find an environment-friendly method to suppress astragal stem rot caused by the isolates of Rhizoctonia solani AG 1 and AG 4, we tested an antagonistic fungus Gliocladium virens G1 was evaluated as a biocontrol agent and estimated inorganic compounds and organic materials were tested for their effect of the disease suppression. G. virens G1 effectively inhibited mycelial growth in a dual culture and caused mycelial lysis in the culture filtrate. No adverse effect was observed when examined for seed germination and seedling growth. Promoted seedling growth was observed with the seed treatment. Seeds of astragal plant were germinated higher in the sterile soil than the natural soil. Of 14 inorganics tested, alum, aluminum sulfate and calcium oxide significantly suppressed the mycelial growth and sclerotial germination. Milled pine bark and oak sawdust also suppressed the mycelial growth. Soil amended with 1% of G. virens G1 composted with pine bark (w/v) significantly controlled astragal stem rot in the glasshouse experiments.

• Mycobiology
• /
• v.41 no.1
• /
• pp.42-46
• /
• 2013

The effects of the composition of a mixture containing food waste compost (FWC), rice bran (RB), and oak sawdust (SD) on the antler-type fruiting body (FB) yield of Ganoderma lucidum were studied. Experiments were performed using 0 (control), 5, 10, 15, 20, 25, 30, 35, and 40% (w/w) FWC added to a basal growth medium consisting of 20% (w/w) RB and 80% (w/w) SD. The content of 15% FWC gave the highest FB yield ($27.0{\pm}1.3$ g/bottle), which was 44% higher than the yield ($18.6{\pm}2.8$ g/bottle) of the control treatment. However, FWC contents of 20~40% showed reduced yield (2.4~23.0 g/bottle), partly because FWC had a high Na concentration (0.6%). These results demonstrate the potential for use of FWC as a component of a growth medium for production of G. lucidum FBs.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.67-72
• /
• 1993

Hot water extractives of sawdust/particle from domestic and foreign wood species, which were composed of pitch pine, Korean pine, larch, Italy poplar, acacia and oak as Korean wood species, Malaysian oil palm and German spruce were quantitatively analyzed with thin layer chromatography. Sugar components of saccharose, galactose, glucose, fructose and arabinose were contained in these wood species. It was assumed that arabinose and glucose are major inhibitory components against cement hardening in larch and oil palm, respectively, since both species contain a large amount of each sugar. In contrast, fructose might not influence so badly on a cement hardening, when considering that fructose was contained much in Italy poplar with a good cement hardening character. Galactose was a minor component.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.55-64
• /
• 2000

Culture maturity assessment can be used to control fruiting body flush timing. Culture maturity of sawdust-based substrate was evaluated by using oak mushroom, (Lentinula edodes (Berk.) Pegler). The influence of substrate water potential (${\psi}$) on the growth and fruiting of three genotypes of L. edodes was also investigated. Glucosamine content revealed a peak at the fruiting body senescent stage. Glucosamine increased steadily to the sporophore senescent stage, and sharply declined at crop treatment. Lipid phosphate and ergosterol contents peaked at pinning and button break stages, respectively. Therefore lipid phosphate and ergosterol contents would be considered as the convenient measurement for judging culture maturity and fruiting potentials. The substrate pH values before inoculation and on the fruiting stage were varied from 6.3 to 4.0. This pH changes were detected as changes in color from bluish purple to yellow by direct bromphenol blue(BPB) spraying, and shown a good correlation with fruit body yield of the 1 st flush. Concerning water potential of the cultures, a slight reduction of water potential, -0.5MPa, stimulated mycelial and colony growths on liquid, agar and sawdust-based substrates. The water potential of well-colonized matured substrate was -0.7MPa and -4.0MPa, before and after the fruiting, respectively. Excellent water providing capacity (higher ${\psi}$) is expected to well-matured cultures with a high density of mycelial colonization. Also, the substrate water potential significantly affected by the interaction between genotypes and spawn run time.

• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.160-166
• /
• 2023

The effects of punching treatment on mycelial culture and fruiting body productivity were investigated in a new Lentinula edodes cultivar, "Jadam", in sawdust medium for the stable production of oak mushroom. As the punching volume and number increased, the weight loss rate and color difference increased and the L value decreased. After spawn inoculation, the sawdust medium temperature and CO₂ concentration reached their highest values at 33 and 19 days of incubation, respectively. The O₂ concentration showed the lowest value on the 14^th day of incubation, which was the opposite pattern to the CO₂ concentration. As the punching volume and the number increased, the medium temperature and O₂ concentration increased, and the CO₂ concentration decreased. Higher punching volumes and numbers resulted in higher temperatures and lower CO₂ concentrations. The best fruiting body yield was 5 × 70 mm - 30 (punching diameter × depth - number), and the total yield after three cycles was 644.7 g.

• Journal of Mushroom
• /
• v.7 no.1
• /
• pp.9-21
• /
• 2009

This study was executed in an attempt to investigate a artificial requisites of fruitbody occurrence. Environmental requirements on habitat for fruitbody occurrence of collected cultures resulted in leading to $13-16^{\circ}C$ and 75% relative humidity, and requiring silt loam of soil texture which had more nutritional substances than a dry field. Optimal temperature was $25^{\circ}C$, medium PDB, and pH 5.0 in cultural conditions. Mannose required of 5% in ASI 59002, 59003, 59004, but 3% in ASI 59001 was selected as optimum carbon source. The substrates stimulating sclerotium formation were cotton waste, or cotton waste + oak sawdust (mixture ratio of 8:2), which had 20% additive of wheat barn respectively. Sclerotium was formed well in the substrate adjusted chemical properties by applying 2% of calcium sulfate. Sclerotium formation was the most effective in the treatment of peat moss + oak sawdust (mixture ratio of 5:5) + 30% of wheat barn.

• Journal of Mushroom
• /
• v.13 no.4
• /
• pp.301-304
• /
• 2015

This study was carried out to investigate the optimum rate of substrate composition in bottle cultivation of Grifola frondosa and had three rates of substrate composition of 67:11:22(T1), 68:15:17(T2) and 74:14:12(T3) as mixing rate of weight of dried oak sawdust, dried corn husk and dried bean-curd refuse. The rate of primordia formation of T3 was 65.8% which was lowest among all treatments. Contraction rate of disease of T1 was 9.8% which was highest among all treatments. Harvesting rate of T2 was 70.5% which was highest among all treatments. Fruit body weights per bottle of T1 and T2 were 85.5 g, 83.3 g respectively and there was not significant difference between those. Yield per 10,000 bottles of T2 was 587 kg and was 7%, 28% higher than those of T1 and T3, respectively. As a result, the rate of substrate composition of 68:15:17(T2) as mixing rate of weight of dried oak sawdust, dried corn husk and dried bean-curd refuse was appeared as optimum rate of substrate composition in bottle cultivation of Grifola frondosa..

• The Korean Journal of Mycology
• /
• v.48 no.2
• /
• pp.125-133
• /
• 2020

A new oak mushroom cultivar 'Hwadam' was bred from monokaryotic strains of 'GMLE36062' and 'LE15401'. The optimum temperature for mycelial growth of 'Hwadam' on potato dextrose agar was 25℃. The cultivation period of 'Hwadam' lasted for 129 days until the first harvest of the fruiting bodies, including 35 days for spawn run, 84 days for browning, and 10 days for development of fruiting bodies. The fruiting bodies of 'Hwadam' had a hemispherical, brighter pileus and thicker stipe than the control cultivar (Sanjo 701ho). The three-cycle yield of 'Hwadam' was 554 g, which was higher than that of control cultivar (405 g). In addition, 'Hwadam' contained 79.4 mg/g of beta-glucan and 0.93 mg GAEs/g of phenolic compounds, which was similar to that of the control cultivar but higher than that of 'L808' and 'Chujae 2ho'.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.235-240
• /
• 2022

This study aimed to replace the imported Chinese complete medium for Lentinula edodes with a newly-developed complete medium that is suitable for export as well. Three media compositions that supported fast mycelium growth and higher density, compared to that in the control, were chosen. Culture in the T13 medium reduced the incubation period for 'Nongjingo' by 12 days and for 'Cham-aram' by 10 days, compared to that required for the control; in addition, the number of days required for browning was greatly reduced for both varieties. The quantity of each mixed medium was increased according to the composition from the 1^st to the 5^th cycle by 5.9% for 'Nongjingo' and 12.6% for 'Cham-aram' in T13, compared to that in the control. A mixed medium comprising oak sawdust + Douglas fir sawdust + corn flour (40:40:20, v/v) was selected as the most suitable complete medium.