• 한국재료학회지
• /
• 제33권6호
• /
• pp.229-235
• /
• 2023

An all-perovskite oxide heterostructure composed of SrSnO₃/Nb-doped SrTiO₃ was fabricated using the pulsed laser deposition method. In-plane and out-of-plane structural characterization of the fabricated films were analyzed by x-ray diffraction with θ-2θ scans and φ scans. X-ray photoelectron spectroscopy measurement was performed to check the film's composition. The electrical transport characteristic of the heterostructure was determined by applying a pulsed dc bias across the interface. Unusual transport properties of the interface between the SrSnO₃ and Nb-doped SrTiO₃ were investigated at temperatures from 100 to 300 K. A diodelike rectifying behavior was observed in the temperature-dependent current-voltage (IV) measurements. The forward current showed the typical IV characteristics of p-n junctions or Schottky diodes, and were perfectly fitted using the thermionic emission model. Two regions with different transport mechanism were detected, and the boundary curve was expressed by ln I = -1.28V - 13. Under reverse bias, however, the temperature- dependent IV curves revealed an unusual increase in the reverse-bias current with decreasing temperature, indicating tunneling effects at the interface. The Poole-Frenkel emission was used to explain this electrical transport mechanism under the reverse voltages.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권4호
• /
• pp.9-12
• /
• 2004

We report a successful fabrication of high-$J_C$ $NdBa_2Cu_3O_{7-{\delta}}$ (NdBCO) films on (100) $SrTiO_3$ substrates by pulsed laser deposition (PLD) in high oxygen pressures ranging from 400 to 800 mTorr. Fabricated NdBCO films exhibited only c-axis orientation, good out-of-plane and in-plane textures, and also excellent superconducting properties, including critical temperature ($T_C$) and critical current density ($J_C$) of above 90 K and the highest of $3.1MA/cm^2$ at 77 K in self-field, implying that NdBCO is a perspective alternative to YBCO for coated conductor. In low oxygen pressures ranging from 100 to 200 mTorr, however, the films showed a-, c-mixed orientation and degraded $T_{C,zero}$ values due to the formation of $Nd_{1+x}Ba_{2-x}Cu_3O_{7-{\delta}}$-type solid solutions with an excessive substitution of $Nd^{3+}$ ions for the $Ba^{2+}$ sites.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.81-84
• /
• 2002

An approach for predicting the effective thermal conductivities of fiber-reinforce composite has been developed based on a thermal-electrical analogy. The unit cell of the composite laminate is divided into regular volume elements and the material properties have been given to each element. By constructing the series-parallel thermal resistance network, the thermal conductivities of composite both in-plane and out-of-plane direction have been predicted. Graphite/Epoxy composite is used for a balanced plain-weave composite laminate. By comparing the predicted results and the previous works, good agreement has been found.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.13-18
• /
• 2007

The mother Ni-W (1-5 wt.%) alloy billets for coated conductor substrate were fabricated by powder metallurgy process. The tensile test results for the sintered Ni-W rods showed the increase of mechanical strength and decrease of ductility with increasing W content due to the solid solution hardening. All the fracture surfaces of the tested specimens showed the typical ductile fracture mode of dimple rupture due to the local necking. The Ni-W alloy billets were made into tape by cold rolling. After the appropriate heat treatment for recrystallization, the brass texture formed by the cold rolling was converted to the complete cube texture. The in-plane and out of plane texture of the tapes estimated by x-ray pole figure were smaller than 9 degree and 7 degree, respectively. The effect of the W addition on the texture development seems not to be significant.

• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1107-1112
• /
• 2008

건축 구조물의 진동특성은 시험으로 알아내기가 어렵기 때문에 지진이나 다른 가진에 대한 영향을 미리 평가하기가 매우 어려웠다. 그러나 근래에 들어 해석 기술이 발전함에 따라 건축물에 대한 성능을 예측해 볼 수 있게 되었다. 건축 구조물의 진동특성 예측은 지금까지는 2차원 평면 해석이 주를 이루었고, 3차원 해석은 이루어지지 않고 있었다. 2차원 해석은 건축물이 비대칭일 때 해석의 신뢰성을 떨어뜨리는 문제를 안고 있다. 본 논문에서는 주거건축물을 3차원으로 모델링하였으며, 지하철 통과시 주거 건축물의 진동 해석을 수행하였다.

• 대한기계학회논문집A
• /
• 제34권5호
• /
• pp.583-588
• /
• 2010

고무의 비선형성과 대변형으로 인해 코드-고무 복합재료의 정확한 거동을 파악하기는 어렵다. 코드와 고무 사이에 제 3 의 상을 가정해서 세 가지 상에 대한 모델링을 하기도 하지만 코드-고무 복합재료 계면의 두께와 물성을 결정하기 힘들다. 본 연구에서는 2 차원 일반화된 평면변형률요소와 평면변형률요소를 사용한 유한요소법을 적용하여 여러 가지 계면 두께를 갖는 코드-고무 복합재료의 유효탄성계수와 무차원 탄성계수를 구하였다. 고무물성은 네오-후크 모델을 적용하였고 여러 가지 하중상태와 몇 가지 계면 물성치에 대한 고찰을 하였다. 그 결과 계면 물성치와 계면 두께는 코드-고무 복합재료의 비선형성과 유효탄성계수에 영향을 미침을 알수 있었다.

• 분석과학
• /
• 제36권4호
• /
• pp.198-203
• /
• 2023

The reaction of cis-protected (Me4en)Pd(II) species with potentially multidentate bis(benzylthio)methylenepropanedioate (L) was carried out to obtain a monometallic compound, [(Me₄en)Pd(L)], in O,O'-coordination mode. The bis(benzylthio)methylene group was bent strikingly from the palladium square plane at the dihedral angle of 70.40°. The physicochemical properties of the present palladium(II) compound were fully characterized by means of infrared and nuclear magnetic resonance spectroscopy, thermogravimetric analysis, and single-crystal X-ray diffraction measurement.

• Coupled systems mechanics
• /
• 제12권4호
• /
• pp.297-313
• /
• 2023

This paper deals with delamination analysis of non-linear viscoelastic multilayered beam subjected to bending in the plane of the layers. For this purpose, first, a non-linear viscoelastic model is presented. In order to take into account the non-linear viscoelastic behaviour, a non-linear spring and a non-linear dashpot are assembled in series with a linear spring connected in parallel to a linear dashpot. The behaviours of the non-linear spring and dashpot are described by applying non-linear stress-strain and stress-rate of strain relationships, respectively. The constitutive law of the model is derived. Due to the non-linear spring and dashpot, the constitutive law is non-linear. This law is used for describing the time-dependent mechanical behaviour of the beam under consideration. The material properties involved in the constitutive law vary along the beam length due to the continuous material inhomogeneity of the layers. Solution of the strain energy release rate for the delamination is obtained by analyzing the balance of the energy with considering of the non-linear viscoelastic behaviour. The strain energy release rate is found also by using the complementary strain energy for verification. A parametric study is carried-out by using the solution obtained. The solutions derived and the results obtained help to understand the time-dependent delamination of non-linear viscoelastic beams under loading in the plane of layers.

• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.95-113
• /
• 2007

Experimental investigations of interlaminar mechanical properties for carbon fiber reinforced plastic (CFRP) laminates were carried out using aramid fiber ($Kevlar^{(R)}$-29 1000d) and carbon fiber (TR40-1K 612d, Mitsubishi Rayon) stitching. Various carbon fiber (CF) stitch densities were used to prepare a number of CF stitched CFRP laminates for double cantilever beam (DCB) tests. An insert tongue-type loading fixture, developed by the Japan Aerospace Exploration Agency (formerly the National Aerospace Laboratory of Japan), was also employed in the DCB test. Interlaminar tension tests were carried out under an out-of-plane directional loading using a single CF stitch thread in the CFRP laminates. The DCB test results clarified that the relationship between the volume fractions of the CF stitch thread ($V_{ft}$) and mode I critical energy release rate ($G_{Ic}$) showed a mostly linear function with a higher gradient than that of the $Kevlar^{(R)}$ stitched CFRP laminates. The CF stitched CFRP tension test results indicated that the consumption energy per unit area ($E_i$) was larger than that of $Kevlar^{(R)}$ stitched CFRP laminates.

• Composites Research
• /
• 제19권3호
• /
• pp.23-28
• /
• 2006

탄소나노튜브로 강화된 구리기지 적층 나노 복합재료를 제작하였고, 마이크로 인장 시험기를 이용하여 기계적 물성을 평가하였다. 탄소나노튜브 층이 강화제로 사용된 샌드위치 형태의 적층 구조는 탄소나노튜브의 선택적인 딥코팅 방법과 전해도금 방법을 이용하여 제작되었다. 본 연구에서 정립한 공정을 사용하여 제작된 나노 복합재료는 구리 기지만을 사용한 재료에 비해 기계적 물성이 향상되었다. 이는 평면내 방향으로 균일하게 분산된 탄소나노튜브에 의해 하중 분산 용량이 증가되었기 때문이며, 두께 방향으로 적층된 구리 기지를 탄소나노튜브 층이 상호 지지하여 인장물성이 강화됨을 확인하였다. 기능적 재료의 제작에 있어 적층 구조는 다양한 분야에 적용될 수 있으며, 본 연구에서는 입자강화복합재료 강화제의 적용 가능성을 확인하였다.