• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.739-747
• /
• 2011

Objective: The present study evaluated information presentation methods applicable to a wearable Braille display in terms of performance and satisfaction measures. Background: A Braille display wearable at a finger can improve accessibility of information for the blind by presenting information in real time. Method: A Braille display with six pins operated by DC servomotors was developed to simulate four information presentation methods(active, stationary, simultaneous, and sequential methods). An evaluation experiment was conducted with 16 participants(8 normal and 8 blind participants) by using three objective measures(reaction time, RT, unit: sec; recognition time, CT, unit: sec; correct response percentage, CP) and two subjective measures(overall satisfaction, OS; perception easiness, PE) with a 7-point scale. Results: The average RTs and CTs of the active and stationary methods were significantly shorter than those of the simultaneous and sequential methods for the blind participants. Also, the average CPs, OSs, and PEs of the active and sequential methods were significantly higher than those of the stationary and simultaneous methods. Conclusion: The active and sequential methods were preferred to the other methods for the blind. Application: The performance characteristics identified in the present study for the four braille display methods can be utilized to develop an effective wearable Braille display system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.258-264
• /
• 2015

This research suggests critical factors affecting success and failure of several commercial mobile operating systems from Palm OS appearing in to main mobile OSs appearing in 2013. For this, we analyses several mobile operating cases, elicit factors affecting success and failure of mobile OS, and conduct ID3 based inductive learning analyses based on elicited factors and values in case dataset. Through this, we draw rules in success and failure of mobile OS and suggest strategic implications for the commercial success of mobile OS in perspective of innovation and globalization.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.429-434
• /
• 1999

This study was undertaken to investigate preparation possibility of chestnut mooks added chestnut shell. Three types of chesetnut starches which were flesh starch(FS), inside shell containing starch(ISS), and shell containing starch(SCS) and acorn starch(AS) as control were used to preparation of mook. The crude tannin contents of chestnut starches was about 25% of that in acorn starch. In the textural properies, hardness of mooks was increased in proportion to the increasing concentration of starches. Hardness md cohesiveness of mooks with chesnut starches were higher than those of acorn starch. Color properties of mooks with OSS were similar to that of AS. Sensory evaluation by 9-point method indicated that the nooks with ISS had greater intensities in all investigation items. The total scores were higher in order of ISS, AS, FS and SCS. The mook with ISS had homogeneous and porous structure by SEM.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.170-179
• /
• 2016

It is a story-based content creation service that provides any user with some proper contents based on a story written by the user in order to utilize a lot of contents accumulated on Internet. For this service, the story has to be described in computer-readable representation. In this paper, analyzing the structure of scenario, as known as screenplay or scripts, a structure of story representation, which is referred to as OpenScenario, is defined. We intend users to produce their own contents by using massive contents on Internet by the proposed method. The proposed method's OpenScenario consists two main parts, OSD (OpenScenario Descriptors) which is a set of descriptors to describe various objects of shots such as visual, aural and textual objects and OSS (OpenScenario Scripts) which is a set of scripts to add some effects such as image, caption, transition between shots, and background music. As an usecase of proposed method, we describe how to create new content using OpenScenario and discuss some required technologies to apply the proposed method effectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.210-225
• /
• 2004

Statement of problem: Implant screw loosening has been remained problem in restorative practices. Surface treatment of screw plays a role of preventing screw from loosening in implant screw mechanism. Purpose : The purpose of this study was to investigate surface characteristics of TiN and ZrN film ion plated screw with titanium and gold alloy screw and to evaluate wear resistance, surface roughness, and film adhesion on screw surface using various instruments. Material and methods : GoldTite screws and titanium screws provided by 3i (Implant Innovation, USA) and TorqTite screws or titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, korea) were selected. Ion plating which is much superior to other surface modification techniques was carried out for gold screws and titanium screws using Ti and Zr coating materials with nitrogen gas. Ion nitrided surface of each abutment screw was observed with field emission scanning electron microscopy (FE-SEM, micro-diamond scratch tester, vickers hardness tester, and surface roughness tester. Results : 1) The surface of gold screw and GoldTite is more smooth than ones of other kinds of non coated screw. 2) The ZrN and TiN coated surface is the more smooth than ones of other kinds of screw. 3) The hardness of TiN and ZrN coated surface showed higher than that of non coated surface. 4) The TiN coated titanium screw and ZrN coated gold screw have a good wear resistance and adhesion on the surface. 5) The surface of ZrN coated screw showed low surface roughness compared with the surface of TiN coated screw. Conclusion : It is considered that the TiN and ZrN coated screw which would prevent a screw from loosening can be applicable to implant system and confirmed that TiN and ZrN film act as lubricant on surface of screw due to decrease of friction for recycled tightening and loosening.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.43-53
• /
• 2007

The purpose of this experimental study was to examine the effect of the decontamination of carbon dioxide ($CO_2$) laser in treatment of ligature-induced peri-implantitis in dogs. A total 24 implants with a sandblasted with large-grit and acid-etched (SLA) surface were inserted in six mongrel dogs. After a 3-month healing period, experimental peri-implantitis characterized by a bone loss of about 3mm was established by inducing with wires. And then wires were removed and plaque control was implemented. Surgical treatment involving flap procedure + debridement of implants surface with chlorhexidine and saline (group 1), flap procedure + GBR with absorbable collagen membrane (Bio-Gide) and mineralized bone graft (Bio-Oss) (group 2), and flap procedure + $CO_2$ laser application + GBR (group 3) was performed. The animals were killed 8 weeks and 16 weeks after treatment, respectively. A histomorphometric analysis confirmed statistically considerable new bone formation within the limit of the 5 most coronal threads in group 3 compared with group 1 at 16 weeks (P<0.05). And intragroup analysis showed considerable increase of new bone formation in group 3 at 16 weeks compared with 8 weeks (P<0.05). The present study demonstrates considerable new bone formation after treatment of experimental peri-implantitis with flap procedure, $CO_2$ laser application and GBR.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.24-31
• /
• 2001

As a novel method to improve strength properties of recycled test liner, Condebelt press drying system was introduced and adopted into Korea. New press drying treatment could enhance the surface and strength properties in accordance with the increase of sheet density. However, Condebelt drying can not increase the density of repeatedly recycled test liner as much as that of virgin UKP and at the same density condition, the strength of Condebelt press dried UKP is greater than that of press dried test liner. In order to increase the strength of test liner, two attempts were tried in this study. First, addition of polyelectrolytes, dry strength agent was investigated with a view to promote the fiber bonding potential of reclaimed corrugated container pulp. Second, blending effect of fines were analyzed in an aims of increasing density and strength of test liner. The results were as follows; Even in the case of test liner densified by Condebelt press dryer, addition of amphoteric PAM as a dry strength agent was effective in increasing strength properties and so the effect of dry strength agent on improving bonding potential of recycled OCC fiber could be confirmed. As an appropriate addition level of amphoteric PAM, below 1% based on dry pulp weight was suggested. Different from virgin UKP, density of recycled test liner can be increased by the blending of OCC fines and strength properties also can be improved. However, excessive blending of OCC fines could result in decreasing of density and serious weakening of test liner. The best blending ration of fines in test liner can be determined as about 30%. Taking into account the fines content in general OCC pulp as 50%, excessive 20% of fines were supposed to be fractionated and removed in order to achieve the best strength of Condebelt press dried test liner.

• Journal of Korean Library and Information Science Society
• /
• v.47 no.4
• /
• pp.359-384
• /
• 2016

This study aims to develop digital archives for honam catholic history institute. To achive the goal, this study considers historical archives of honam catholic history institute. Also, this study proposed an effective archiving method based on OSS(open source software) for contents collection, management, preservation and service. Archiving of local cultural contents can contribute to the local development along with cultural industry policy. This study performed interview with people in charge of management of archives to extract general requirements for implementation of local archives. With the results, this study limitations of current archives management and considerations of implementation of local archives. This study proposed a method to effectively solve the limitations through the processes.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.334-338
• /
• 2009

Supernumerary teeth are extra teeth or tooth-like structures which may have either erupted or unerupted in addition to the 20 deciduous teeth and the 32 permanent teeth. Clinicians sometimes confront unerupted supernumerary teeth where implants would be placed. Many clinicians consider immediate placement of implant into an extracted socket as an effective technique compared to the conventional method of waiting several months for bone healing, because of the advantages such as reduction of treatment period, preservation of alveolar bone and soft tissue, etc. We could hardly find the case of immediate placement of implant after extraction of impacted supernumerary teeth and permanent teeth together. Therefore we report the case of immediate implantation following extraction of impacted supernumerary teeth and poor periodontal conditioned permanent teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.3
• /
• pp.455-469
• /
• 1994

Regular radiographic examination has been considered an essential diagnositic method for osseointegrated dental implantation. This study investigated marginal bone loss through the measurement on periapical radiographs and changes in bone density through digital subtraction image radiographic method around 88 endoseous root-form dental implants in 43 human subjects. Four types of endosseous dental implants were investigated : Standard series, Mini series and Hex-lock system of Steri-Oss Dental implant system, and $Br{\aa}nemark$-type implant from 3i dental implant system, in a 3 month interval for a total period of 12 months. The results were as follows : 1. Rapid bone loss occurred in the first 3 months in all 4 groups, and the bone level stabilized at the first thread of the implant fixtures. Amount of bone loss for 12 months showed correlation with the length of the polished neck portion. 2. Most of the implant systems showed resorption of alveolar bone up to the polished neck portion although a long polished neck could delay the resolution. 3. Alveolar bone loss apical to the polished neck portion stabilized at the first thread of the fixtures with no correlation to either the time of exposure of the polished neck or types of implant systems. 4. No changes in bone density around the implant threads were observed throughout the experimental period. Bone density decreased at the marginal bone, and increased at the newly-formed alveolar crest. These results indicate that most of the alveolar bone loss occur within the first 12 months after installation of endosseous root-form dental implants resulting in the exposure of polished neck portions, and the bone level stabilizes thereafter at the first thread portions of the implant fixtures. The experimental period of 12 months seems insufficient for observing changes in bone density, and a long-term observation should be needed.