• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.11-18
• /
• 2022

In this research, curium oxide (CmO₂) is studied as fuel for VVER-1200 reactor to get an attention to its energy value and possibilities. For this purpose, CmO₂ is used in fuel rods or integrated burnable absorber (IBA) rods with and without UO₂ and then compared with the conventional fuel assembly of VVER-1200 reactor. It is burned to 60 GWd/t by using SRAC-2006 code and JENDL-4.0 data library. From these studies, it is found that CmO₂ is competent like UO₂ as a fuel due to higher fission cross-section of ²⁴³Cm and ²⁴⁵Cm isotopes and neutron capture cross-section of ²⁴⁴Cm and ²⁴⁶Cm isotopes. As a result, when some or all of the UO₂ of fuel rods or IBA rods are replaced by CmO₂, we get a similar k-inf like the reference even with lower enrichment UO₂ fuels. These studies show that the use of CmO₂ as IBA rods is more effective than the fuel rods considering the initially loaded amount, power peaking factor (PPF), fuel temperature and void coefficient, and the quality of spent fuel. From a detailed study, 3% CmO₂ with inert material ZrO₂ in IBA rods are recommended for the VVER-1200 reactor assembly from the once through concept.

• Preventive Nutrition and Food Science
• /
• v.8 no.3
• /
• pp.249-252
• /
• 2003

This study was conducted to determine the effects of chromium-methionine (CrMet) supplementation at various levels on obesity index, body fat, and serum glucose, insulin and leptin in rats. Forty male Sprague-Dawley rats were randomly assigned to one of four dietary groups and fed AIN-76 semi-purified basal diets supplemented with 0, 300, 600 or 1200 ppb Cr from CrMet. After 4 weeks on the respective diets, the rats were killed and serum glucose, insulin and leptin concentrations were determined. The CrMet supplementation did not affect weight gain, feed intake or feed efficiency ratio, fasting glucose, insulin or leptin levels among treatment groups. Although final body weight in all treatments were not significantly different, naso-anal length was longer in the 1200 ppb CrMet group than those of control or other groups (p<0.05). The lowest obesity index and body fat were observed in the 1200 ppb dietary group (p<0.05). The obesity index of the rats fed 1200 ppb supplemental CrMet was lower than in the other groups. These results suggest that CrMet supplementation results in a significant decrease in obesity index, possibly by decreasing the body fat that corresponded to increasing CrMet dosage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.4 s.107
• /
• pp.25-32
• /
• 2004

Flocculation of fibers and its distribution in paper are related to flocculation mechanisms, retention and drainage. Relationship between flocculation mechanisms and physical properties of paper has not been fully studied. In this study, flocculation of fibers was investigated by changing microparticles for flocculation mechanism analysis. When fillers were not added, formation and strength were deteriorated by 100, 300, or 500 ppm of linear PAM (all L-PAM), All L-PAM + 1200 ppm inorganic microparticle (1200-IM), all L-PAM + 120 ppm organic microparticle (120-OM), all L-PAM + 1200 ppm organic microparticle (1200-OM) because of too much flocculation. When 5, 15, $25\%$ (od.w/w) fillers were added, retention and drainage process were not affected by the extent flocculation when 500 ppm L - PAM, 500 ppm L - PAM + 1200- IM, and 500 ppm L - PAM + 120 ppm OM were added.

• International Journal of Oral Biology
• /
• v.37 no.3
• /
• pp.91-102
• /
• 2012

Bcl-2 protects tumor cells from the apoptotic effects of various anti-neoplastic agents. Increased expression of Bcl-2 has been associated with a poor response to chemotherapy in various malignancies, including leukemia. Hence, bypassing the resistance conferred by anti-apoptotic factors such as Bcl-2 represents an attractive therapeutic strategy against cancer cells, including leukemic cells. This study was undertaken to examine whether the anticancer drug, cisplatin and the synthetic chenodeoxycholic acid (CDCA) derivative, HS-1200 show anti-tumor activity in U937 and U937/Bcl-2 cells. Viability assays revealed that HS-1200 overcomes the resistance conferred by Bcl-2 in human leukemic U937 cells. Various apoptosis assessment assays further demonstrated that HS-1200 overcomes the resistance conferred by Bcl-2 in human leukemic U937 cells by inducing apoptosis. In addition HS-1200, but not cisplatin, overcomes the anti-apoptotic effects of Bcl-2 in Bcl-2 over-expressing human leukemic cells (U937/Bcl-2 cells). Notably, we observed that the HS-1200-induced formation of mature promyelocytic leukemia (PML) nuclear bodies (NBs) correlates with a suppression of the anti-apoptotic effects of Bcl-2 in human leukemic cells over-expressing this protein (U937/Bcl-2 cells). Furthermore, HS-1200 was found to induce the association between PML and SUMO-1, Daxx, Sp100, p53 or CBP in the aggregated PML-NBs of U937/Bcl-2 cells. Thus, PML protein and the formation of mature PML-NBs could be considered as therapeutic targets that may help to bypass the resistance to apoptosis conferred by Bcl-2. Elucidating the exact mechanism by which PML regulates Bcl-2 will require further work.

• Annals of Laboratory Medicine
• /
• v.38 no.6
• /
• pp.530-537
• /
• 2018

Background: Measurement of insulin and C-peptide concentrations is important for deciding whether insulin treatment is required in diabetic patients. We aimed to investigate the analytical performance of insulin and C-peptide assays using the Lumipulse G1200 system (Fujirebio Inc., Tokyo, Japan). Methods: We examined the precision, linearity, and cross-reactivity of insulin and C-peptide using five insulin analogues and purified proinsulin. A method comparison was conducted between the Lumipulse G1200 and Roche E170 (Roche Diagnostics, Mannheim, Germany) systems in 200 diabetic patients on insulin treatment. Reference intervals for insulin and C-peptide concentrations were determined in 279 healthy individuals. Results: For insulin and C-peptide assays, within-laboratory precision (% CV) was 3.78-4.14 and 2.89-3.35%, respectively. The linearity of the insulin assay in the range of 0-2,778 pmol/L was $R^2=0.9997$, and that of the C-peptide assay in the range of 0-10 nmol/L was $R^2=0.9996$. The correlation coefficient (r) between the Roche E170 and Lumipulse G1200 results was 0.943 (P <0.001) for insulin and 0.996 (P <0.001) for C-peptide. The mean differences in insulin and C-peptide between Lumipulse G1200 and the Roche E170 were 19.4 pmol/L and 0.2 nmol/L, respectively. None of the insulin analogues or proinsulin showed significant cross-reactivity with the Lumipulse G1200. Reference intervals of insulin and C-peptide were 7.64-70.14 pmol/L and 0.17-0.85 nmol/L, respectively. Conclusions: Insulin and C-peptide tests on the Lumipulse G1200 show adequate analytical performance and are expected to be acceptable for use in clinical areas.

• Journal of the Korean Ceramic Society
• /
• v.15 no.4
• /
• pp.213-223
• /
• 1978

The purpsoe of this study was to produce domestic stamping materials; sling mass which could be used as unburned refractory for iron melt'ladle. Batch compositions were based on Belgian Ladelite; mineral compositions were composed of 84 wt% of quartz and 16 wt% of clay, and particle sizes were divided into 12 wt% of 1410/297㎛, 18wt% 297/149㎛, 20wt% of 149/74㎛, 11wt% 74/44㎛ and 39wt% 44㎛ under. The effect of variable batch compositions were also investigated such as substitution of pyrophylite or industrial grade alumina for quartz and of zircon for portion of quartz and clay, increase of clay and addition on sericite. Samples were pressed at 100kg/㎠ with 7.4wt% of water or 7.4wt% of 4 wt% PVA solution. Dried and Fired properties of samples such as linear shrinkage, apparent porosity, modulus of rupture, refractoriness and corrosion resistance to blast furnace slag were investigated. The results are summarized as follows. 1. Dried samples are shrinked, but fired at 700-1400℃ expanded. Samples fired at 700-1000℃ and 1200-1400℃ tended to expand with incresing of firing temperature, but fired at 1000-1200℃ tended to shrink with increase of firing temperature. 2. Apparent porosity of samples fired at 700℃ is increased, but fired at 1200-1400℃ decreased with increasing of firing temperature. 3. Modulus of rupture of samples fired at 700℃ is decreased, but fired at above 700℃ increased with increasment of firing temperature. 4. Dried samples with 7.4 wt% of 4 wt% PVA solution better improve modulus of rupture than with 7.4 wt% of water, but the firing strength of the sampels fired at 700-1000℃ is showed reversely. 5. In quartz-clay system, mineral phases of samples fired at above 1200℃ are consisted of α-quartz, α-cristobalite and mullite. Respectively as firing temperature was rising up, intensity of α-cristobalite and mullite is in creased. 6. Quartz-Kibushi clay system, Kimcheun quartz(substitutuion of portion of industrial grade alumina for quartz) Hampyeung clay system and pyrophyllite-clay system are better in corrosion resistance to blast furnace slag than burned pyrophyllite brick. 7. 84 wt% of pyrophyllite-16wt% of clay system is superior in modulus of rupture and corrosion resistance to blast furnace slag to 84 wt% of quartz-16 wt% of clay system.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.586-591
• /
• 2012

$Zr_2WP_2O_{12}$ powder, which has a negative thermal expansion coefficient, was synthesized by a solid-state reaction with $ZrO_2$, $WO_3$ and $NH_4H_2PO_4$ as the starting materials. The synthesis behavior was dependent on the solvent media used in the wet mixing process. The $Zr_2WP_2O_{12}$ powder prepared with a solvent consisting of D. I. water was fully crystallized at $1200^{\circ}C$, showing a sub-micron particle size. According to the results obtained from a thermal analysis, a $ZrP_2O_7$ was synthesized at a low temperature of $310^{\circ}C$, after which it was reacted with $WO_3$ at $1200^{\circ}C$. A new sintering additive, $Al(OH)_3$, was applied for the densification of the $Zr_2WP_2O_{12}$ powders. The cold isostatically pressed samples were densified with 1 wt% $Al(OH)_3$ additive or more at $1200^{\circ}C$ for 4 h. The main densification mechanism was liquid-phase sintering due to the liquid which resulted from the reaction with amorphous or unstable $Al_2O_3$ and $WO_3$. The densified $Zr_2WP_2O_{12}$ ceramics showed a relative density of 90% and a negative thermal expansion coefficient of $-3.4{\times}10^{-6}/^{\circ}C$. When using ${\alpha}-Al_2O_3$ as the sintering agent, densification was not observed at $1200^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.369-374
• /
• 2004

Calcium sulfoalumiante(CSA) was prepared for using natural calcite($CaCO_3$) and industrial by-products and wastes, such as $Al(OH)_3,\;CaSO_4{\cdot}2H_2O$. The mixture of raw materials was fired at 20, 400, 600, $1200^{\circ}C$ for 1h and cooled rapidly in air. The cement replaced by 10 wt% $C_4A_3S$ expansive additives was investigated by the measurement of the hydration products and compressive strength, setting time, expansion at wet curing condition. $C_4A_3S$ was found in x-ray diffraction pattern over the temperature $1200^{\circ}C$. The setting time or the cement pastes added clinkers fired at different temperature was shorter than ordinary portland cement. The compressive strength was higher than the ordinary portland cement about 20~30%. The mainly hydration products were ettringite, and $Ca(OH)_2$. The expansion due to the formation of ettringite during hydration decreased the drying shrinkage of hardened cement rather than the ordinary portland cement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.277-286
• /
• 1997

The purpose of this study is to construct the AM/FM system for a university. The sample area used in this study is the Gyeongsang National University in Chinju City, Korea. The layout maps, which scale are 1/1200, 1/3000 and 1/5000, a map of planning of common duct, which scale is 1/1200, and the facility maps which scale is 1/200 were used for input of spatial data. The year of pipe buried, materials of pipe, pipe diameter, length of pipe, depth of pipe buried and slope of pipe buried were purpose of efficient data searching, analyzing, and processing. It was revealed that rapid providing of facility informations and efficient facility management are possible using the constructed the AM/FM system for a university.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.4
• /
• pp.125-130
• /
• 2011

$Cr_2AlC$ compounds were synthesized by hot pressing, and oxidized between 900 and $1200^{\circ}C$ in air for up to 50 hours. They oxidized to a thin $Al_2O_3$ layer containing a small amount of $Cr_2O_3$with the liberation of carbon as CO or $CO_2$ gases. The consumption of Al to form the $Al_2O_3$ layer led to the depletion of Al and enrichment of Cr just below the $Al_2O_3$ layer, resulting in the formation of an underlying $Cr_7C_3$ layer. As the oxidation temperature and time increased, the $Cr_7C_3$ oxide layer and the underlying $Cr_7C_3$ layer thickened. The oxidation resistance of $Cr_2AlC$ was generally good due to the formation of the $Al_2O_3$ barrier layer.