• 한국조명전기설비학회지:조명전기설비
• /
• 제9권3호
• /
• pp.80-87
• /
• 1995

영구자석형 스테핑 전동기의 언덕턴스를 고려하여 최대 평균 토오크식을 제시하였으며, 제시된 토오크식에 근거하여 마이크로컨트롤러에 의해 lead angle을 전동기의 속도에 따라 최적으로 제어함으로서 최대 토오크를 발생시키는 제어시스템을 설계하여 전동기의 토오크/속도 특성 실험을 하였다. 이론식에 의하면 토오크/속도 곡선에서 최적 lead angle의 도입에 따라 발생하는 토오크가 증대되며, 운전영역이 2배이상 확대되는 바와 같이, 특성실험 결과에서도 최적 lead angle의 실현에 따라 구동모드에 관계없이 발생 토오크가 증대되며, 운전영역이 2배이상 학대됨을 확인 할 수 있다.

• 한국음향학회지
• /
• 제16권4호
• /
• pp.29-34
• /
• 1997

원거리에서 수동소나에 의한 탐지거리를 예측하기 위해서는 소나방정식이 이용된다. 본 연구에서는 거리와 깊이함수의 신호이득 및 탐지확률을 구한 후 이를 거리로 적분하여 거리의존 해양환경에서 탐지거리를 계산하는 탐지거리 예측모델을 개발하였다. 개발된 모델은 기존에 발표된 거리독립 해양환경에서의 결과와 비교하여 검증하였고, 이를 바탕으로 거리의존 해양환경에서 수동소나에 의한 표적탐지에 큰 영향을 주는 난수성 소용돌이 해양환경에 확장 적용하여 표적의 탐지거리를 예측하였으며, 그 결과에 대하여 소개한다.

• 한국환경복원기술학회지
• /
• 제9권1호
• /
• pp.72-88
• /
• 2006

The optimal environmental ranges of the establishment phase for the distribution of Zizania latifolia and Typha angustifolia was determined to develop a set of basic data and criteria of planting substrate for the restoration, conservation and management of wetlands. The study was carried at 17 wetlands in the Kyunggi-do and Gyeongsangnam-do region where inland wetlands place intensively in June, 2005. Total 127 quadrats were sets in growing areas of Zizania latifolia and Typha angustifolia. $NO_3-N$, K, Ca, Mg and Na in the water variables and soil texture, LOI (loss on ignition), soil pH and soil conductivity in the soil variables were analyzed. The optimal range of water depth for the distribution of Zizania latifolia was -5~39cm, $NO_3-N$ content of water was <0.01~0.19ppm, K content of water was 0.1~5.9ppm, Ca content of water 0.5~44.9ppm, Mg content of water was 1.2~11.9ppm, Na content of water 3.4~29.9ppm, water conductivity was 48~450${\mu}S$/cm, respectively. The optimal range of LOI for the distribution of Zizania latifolia was 1.7~11.9%, soil conductivity was 25.5~149.9${\mu}S$/cm, respectively. The optimal range of water depth for the distribution of Typha angustifolia was -20~24cm, $NO_3-N$ content of water was <0.01~0.19ppm, K content of water was 0.2~2.9ppm, Ca content of water 0.6~19.9ppm, Mg content of water was 0.2~5.9ppm, Na content of water 3.5~19.9ppm, water conductivity was 96~450${\mu}S$/cm, respectively. The optimal range of LOI for the distribution of Typha angustifolia was 2.4~15.9%, soil conductivity was 17.6~149.9${\mu}S$/cm, respectively. The optimal soil texture were loam, silt loam and sandy loam in both species. The lower water depth (-20~40cm) is appropriate to increase biodiversity in both species dominated community and it is better to maintain water depth of 40~100cm for water purification. Both species appear frequently in the soil with high silt content.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.1100-1105
• /
• 2000

현대의 레이더 펄스 압축기술로 가장 널리 사용되고 있는 방식은 바커코드를 사용하여 matched filter로 레이더 신호를 처리하는 상관처리(correlation processing)이다. 그러나 이 방식의 경우 탐지 감도를 높여 주는 장점이 있지만, 환경에 따라서 range-sidelobe가 발생하여 레이더의 성능을 낮추게 된다. 본 논문에서는 상관처리방식에 추가적인 처리로 sidelobe를 제거하는 최적처리 방법을 제안하고 Doppler shift가 존재할 때의 성능을 평가한다. 그리고 제안된 알고리즘 환경에서 최적의 이진 코드를 개발하고 이를 Barker 코드를 사용한 전통적인 상관처리방식의 경우와 비교.분석한다. 도플러 변이가 존재할 때, 최적 코드를 사용하여 최적 처리하는 방식이 바커코드를 사용한 전통적인 처리방법보다 레이더의 성능을 향상시킴을 보여줄 것이다.

• 한국환경보건학회지
• /
• 제24권2호
• /
• pp.38-46
• /
• 1998

The purpose of this study is to evaluate and compare the effective coagulation of commercial humic acid which is well known as major precursor of trihalomethane, with LAS and PAC and to quantify the residual aluminum in the treated water. Then the optimum pH, the dosage of coagulant were determined. 1. Humic acid concentrati6n, UV absorbance and color were well correlated and UV absorbance(254 nm) and color seem to be used in quntificative analysis of humic acid of same kind. 2. Optimal dosage of LAS and PAC increase as humic acid concentration increases. And optimal pH range for coagulation using LAS is pH 5.5-7.0 and pH 3.5-6.5 for PAC. Within these ranges the removal efficiency is 90-99%. 3. The results of quantification of residual aluminum in treated water shows that minimal aluminum remains on the optimal coagulation condition. But the residual aluminum increses as the dosage of coagulant is beyond the optimal range. Thus the dosage of coagulant should be chosen with the condition on which humic acid removal is maximum and the residual aluminum concentration is minimum. 4. In the water treatment process the raw water pH range is 6.5-8.0, and it seems to be possible to remove humic acid by charge neutralization not by sweep floc. But it should be considered that different commercial humic acids have different physical and chemical characteristics.

• PNF and Movement
• /
• 제14권1호
• /
• pp.59-65
• /
• 2016

Purpose: The purpose of this study was to review articles in order to establish optimal contraction intensity and duration in the performance of relaxation techniques for maximal increase in range of motion. Methods: The Cochrane, EBSCO, Embase, Medline, ProQuest, PubMed, ScienceDirect, and Scopus databases were used to search articles from 1990 to January 2016. The search terms were "contract relax," "hold relax," "muscle energy technique (MET)," and "proprioceptive neuromuscular facilitation (PNF) stretching." Only experimental human studies (randomized controlled trials) that compared the effects of varying intensity and duration of isometric contraction were included. Non-English language and unpublished studies were excluded. Results: A total of 2,156 articles were initially identified, with only five eventually meeting the inclusion and exclusion criteria. Three studies compared the effects of varying intensity in isometric contraction and two studies compared the effects of varying duration in isometric contraction with regard to range of motion (ROM). Two articles suggested that submaximal voluntary isometric contraction was more effective than maximum voluntary isometric contraction (MVIC) in the improvement of ROM. One article showed that a longer contraction time led to greater increases in ROM. Conclusion: Submaximal voluntary isometric contraction was recommended during contract-relax exercises in healthy people. Lack of evidence makes it difficult to suggest the optimal duration of isometric contraction during relaxation techniques. For future research, high-quality evidence will be needed to establish the optimal contraction intensity for maximum improvement of ROM.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.172-181
• /
• 2019

This paper deals with the problem of generating the energy optimal trajectory which is intended to enhance the target tracking performance of a passive homing missile. Noticing that the essence of passive target tracking is the range estimation problem, the target information gathered by passive measurements can be readily analyzed by introducing the range estimator designed in line-of-sight(LOS) frame. Moreover, for the linear filter structure of the suggested range estimator, the cost function associated with the target information is clearly expressed as a function of the line-of-sight rate. Based on this idea, the optimal missile trajectory maximizing the target information is obtained by solving the saddle point problem for an indefinite quadratic cost which consists of the target information and the energy. It is shown that, different from the previous heuristic approaches, the guidance command producing the optimal passive homing trajectory is produced by the modified proportional navigation guidance law whose navigation constant is determined by the weighting coefficient for target information cost.

• 한국해양공학회지
• /
• 제36권4호
• /
• pp.251-269
• /
• 2022

The process-based XBeach model has numerous empirical parameters because of insufficient understanding of hydrodynamics and sediment transport on the nearshore; hence, it is necessary to calibrate parameters to apply to various study areas and wave conditions. Therefore, the calibration process of parameters is essential for the improvement of model performance. Generally, the trial-and-error method is widely used; however, this method is passive and limited to various and comprehensive parameter ranges. In this study, the Generalized Likelihood Uncertainty Estimation (GLUE) method was used to estimate the optimal range of three parameters (gamma, facua, and gamma2) using morphological field data collected in Maengbang beach during the four typhoons that struck from September to October 2019. The model performance and optimal range of empirical parameters were evaluated using Brier Skill Score (BSS) along with the baseline profiles, sensitivity, and likelihood density analysis of BSS in the GLUE tools. Accordingly, the optimal parameter combinations were derived when facua was less than 0.15 and simulated well the shifting shape, from crescentic sand bar to alongshore uniform sand bars in the surf zone of Maengbang beach after storm impact. However, the erosion and accretion patterns nearby in the surf zone and shoreline remain challenges in the XBeach model.

• KSBB Journal
• /
• 제13권5호
• /
• pp.491-496
• /
• 1998

The production of fibrinolytic enzyme from Bacillus subtilis BK-17 was studied in the shake flask cultures. The important medium components studied include nitrogen source, carbon source and inorganic salts. The environmental conditions include initial pH, temperature, shaking speed and working volume. Among various N-sources, C-sources and inorganic salts tested, soybean flour, D-glucose and Na2HPO4 gave the best results, and their optimal concentrations were 1.5%, 0.5% and 0.05%, respectively. The optimal pH and temperature were 9.0 and 37$^{\circ}C$. With decreasing working volume in the range of 25∼100ml in the 250ml flask or increasing shaking speed in the range of 100∼300rpm, the enzyme production was greatly enhanced. The enzyme activity under the optimal conditions was about 1400I.U./ml with urokinase as a standard.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1938-1948
• /
• 2003

This paper represents that an enhanced genetic algorithm (EGA) is applied to optimal design of a squeeze film damper (SFD) to minimize the maximum transmitted load between the bearing and foundation in the operational speed range. A general genetic algorithm (GA) is well known as a useful global optimization technique for complex and nonlinear optimization problems. The EGA consists of the GA to optimize multi-modal functions and the simplex method to search intensively the candidate solutions by the GA for optimal solutions. The performance of the EGA with a benchmark function is compared to them by the IGA (Immune-Genetic Algorithm) and SQP (Sequential Quadratic Programming). The radius, length and radial clearance of the SFD are defined as the design parameters. The objective function is the minimization of a maximum transmitted load of a flexible rotor system with the nonlinear SFDs in the operating speed range. The effectiveness of the EGA for the optimal design of the SFD is discussed from a numerical example.