• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.21-27
• /
• 2008

In this paper, we design and implement the upstream packet bandwidth allocation algorithm on OPNET-based DOCSIS 3.0 simulator including channel-bonding CM (Cable Modem)s. Previous DOCSIS CM could not support channel bonding, it has problem in upstream bandwidth allocation and determine the contention area. The proposed upstream bandwidth allocation algorithm has been improved the queuing time and success rate. For the simulation, we design the MAC frame structure with channel bonding supported CM and not. And then, this paper design and implement the CMTS node model, CM node model, CMTS process model, and CM process model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.9-17
• /
• 2009

A Mobile Ad hoc network(MANET) is a network consisting of a set of wireless mobile nodes, which communicate with each other without centralized control or established infrastructure. In this paper, to obtain a better understanding of AODV(Ad hoc On-Demand Distance Vector Routing Protocol)and OLSR(Optimized Link State Routing Protocol) routing protocols, different performances are simulated and analyzed using OPNET modeler 14.5 with the various performance metrics, such as packet delivery ratio, end-to-end delay and routing overhead. As a conclusion, in static analysis, the routing overhead of OLSR is affected by the number of nodes, but not data traffic. In AODV case, it is affected by both data traffic and number of nodes. In mobility analysis, routing overhead is not greatly affected by mobility speed in AODV and OLSR, and the PDR(Packet Delivery Ration) of OLSR is decreased as the node speed increased, while AODV is not changed. AS to delay, AODV is always higher than OLSR in both static and nobility cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.780-788
• /
• 2011

The lack of QoS (Quality of Service) support functionalities in IEEE 802.11 DCF mode makes it difficult to provide real-time multimedia services in WLANs. In this paper, we propose an effective available bandwidth measurement method in IEEE 802.11b DCF environments. The proposed method measures the total channel idle time and the collision probability during each measurement period. Then, the available bandwidth is calculated by considering those measured information and the transmission overheads at MAC and PRY layers. The performances of the proposed method are evaluated using OPNET simulator. The simulation results show that the proposed method provides more exact results than existing comparable schemes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.4
• /
• pp.97-106
• /
• 2014

In this paper, we propose a design method to extend certain cognitive radio (CR) MAC protocols originally proposed only for the one hop applications in distributed CR networks to MANET routing protocols. Among several CR MAC protocols, the opportunistic MAC (called O-MAC) and the opportunistic period MAC (called OP-MAC) are considered, and AODV as MANET routing protocol is used. We implement the protocols using OPNET network simulator, and compare the performances in both MAC and AODV routing environments. With the experiments, we analyze the relationship between MAC and routing performances of the CR protocols.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.677-681
• /
• 2009

The Smoothly Coupled Integration (SCI) proposed in this paper takes only the strength of loosely coupled integration and tightly coupled integration. Furthermore, 3G network and WiBro network, which are coupled with SCI, have independent architecture which supports mobility and seamless services by fast handoff. Computer simulation with the use of OPNET marked excellence in performance of smoothly coupled integration.

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.111-118
• /
• 2014

The Smart grid refers to the technology that enables efficient usage of electric power by collecting information concerning the power usage and power lines grafting information and communications technology to onto power grids. There are Zigbee, PLC or IEEE 802.11 WLAN MAC as a core technology of the Smart grid, but in this paper, the discussion is focused on the PLC. The PLC is the technology that carries out data communications using power lines and put into practical use in the field of lights or home appliances control recently but PLC-applied communications between electronic devices are rarely seen. For the reason that the PLC uses high-voltage power lines and has a disadvantage of experiencing higher data loss rate caused by the noises produced by going through transformers, the technology is yet to be used in many areas. Nevertheless, the PLC has been studied widely recently in respect that it's the low-cost communication solution for the Smart Metering [1]. Moreover, this technology is emerging as a novel data communication method and discussed as an important technology lately due to the developments of the Smart grid systems and Internet of things (IoT). Thus, in this paper, the results obtained from designing and performing implementation scenario for the PLC-based Smart grid home network system were compared and analyzed with that of IEEE 802.11 WLAN MAC (the foundation technology at Jeju Smart grid Test bed)-based Smart grid home network. Thus, in this paper, OPNET 14.5 PL8, OSI 7 layer, PLC router nodes and PLC nodes had been used for the designing and implementation simulations of both systems. Additionally, QoS was not considered in order to guarantee that all the traffics would not have the same processing priority.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1297-1304
• /
• 2011

SIP(Session Initiation Protocol) has some security vulnerability because it works on the Internet. Therefore, the proxy server can be affected by the flooding attack such as DoS and service interruption. However, traditional schemes to corresponding Denial of Service attacks have some limitation. These schemes have high complexity and cannot protect to the variety of Denial of Service attack. In this paper, we newly define the normal user who makes a normal session observed by verifier module. Our method provides continuous service to the normal users in the various situations of Denial of Service attack as constructing a whitelist using normal user information. Various types of attack/normal traffic are modeled by using OPNET simulator to verify our scheme. The simulation results show that our proposed scheme can prevent DoS attack and achieve a low false rate and fast searching time.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.40-49
• /
• 2015

PicoCast is a recently proposed short-range wireless communications technology that supports both low rate sensor/control data and high speed data such as voice and video traffic in the personal space, defined by the user-centric space of radius tens of meters, with one unified protocol. When the users are in the same area, personal spaces defined by each user may overlap. Since these PicoCast piconets may simultaneously operate, mutual interference is unavoidable. It is necessary to investigate the effect of mutual interference on data transmission and to conduct research on minimizing the interference among PicoCast devices. In this paper we analyze the effect of mutual interference between PicoCast piconets based on data throughput using OPNET network simulator. We have implemented the PicoCast protocol and measured the average throughput and packet loss rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.942-949
• /
• 2004

This paper proposes and analyzes the anti-collision algorithm in Ubiquitous ID system. We mathematically compares the performance of the proposed algorithm with that of binary search algorithm, slotted binary tree algorithm using time slot, and bit-by-bit binary tree algorithm proposed by Auto-ID center. We also validated analytic results using OPNET simulation. Based on the analytic results, comparing the proposed algorithm with bit-by-bit algorithm which is the best of existing algorithms, the performance of proposed algorithm is about 5% higher when the number of tags is 20, and 100% higher when the number of tags is 200.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2011

In this paper, we propose an evenly distributed mesh scheme to support services in mobile ad-hoc networks. Two strategies, the adaptive upgrading of forwarding nodes and the adaptive downgrading of forwarding nodes, are presented in the scheme. Our proposed scheme can support construction of better multicast mesh that can give higher packet delivery ratio with lower duplicate data as well as solve the problem of serious congestion especially when node mobility and data transmission rate are high in mobile ad-hoc networks. The performance evaluation is performed via simulation using OPNET.