• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.265-270
• /
• 2014

The working-day movement model, which implemented in the ONE simulator, supports the environments similar to the real life by using the transportation. However, there is no taxi movement model in the working-day movement model. So, we implemented a taxi movement model in the ONE simulator as the previous work. It is changed significantly for the simulation results of routing protocols in the ONE simulator. In this paper, we analyze the performance evaluation of the DTN routing protocol such as an epidemic routing protocol using our taxi movement model in the ONE simulator.

• Journal of Navigation and Port Research
• /
• v.28 no.2
• /
• pp.113-119
• /
• 2004

Ships' collision accident has often occurred in congested waterways or in harbour areas. To examine the cause of collision accident may be necessary to prevention against another similar one. We discuss the construction of ship-manoeuvring-simulator system used for reproducing ships' collision phenomenon The system consists of one simulator bridge for own ship and two control consoles for own ship and target ship. Own ship and target ship are linked each other, and are simultaneously manoeuvred in simulator bridge or at control console respectively. And a simulator experiment for reproducing ships' collision phenomenon and for examining the cause of accident is carried out. Through the present case study, we find out that the constructed simulator system is very useful for reproducing ships' collision phenomenon and for examining the cause of accident.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2230-2234
• /
• 2003

This paper proposes a distributed simulator for general control system in CEMTool. Systems can be described by SIMTool likes the simulink in Matlab. For distributed simulation, we can seperate any system into several parallel subsystems in SIMTool. The number of parallel subsystem can be determined by the system's property. After seperation, parallel simulator will do initialization, one-step-ahead simulation, block-distribution and ordering and so on. Finally, simulator will create independent C codes and executive files for each subsystem. The whole system is fulfilled by several PCs, and each PC executes one subsystem. There are communications among these subsystem using reflective memory or ethernet. We have made several experiments, and the 5-stand cold rolling mill control system is our main target. The result of parallel simulation has shown effective speedup in comparison with one pc simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.432-432
• /
• 2000

The above-Knee Prosthesis has been used by the handicapped person and become a important part of their life. But uniform above-knee prosthesis only increases inconvenience And so the tool that can estimate and help to design of suitable prosthesis for user need to be developed. The simulator developed in this research is composed of two part. One is hardware that can realize various walking motions. The other is software that can display and analyze the results of walking mot ion. Three motors constitute hardware of Simulator. Two motors are used to realize heap motion that need two degree of freedom and the rest one used to realize swing motion. Software of Simulator display results of three motor trajectories and walking mot ion of hardware using computer graphic. Therefore, The simulator developed in this research which is able to realize human gait and results are analyzed through simulation program at PC will be some help to design and produce of prosthesis suitable to user.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2851-2853
• /
• 2000

In order to simulate a robot by using existing simulation packages, many engineers must work in one place existing simulator. It is clear that engineer can't the simulator in other place. In this paper, a simulator by using a web environment is proposed in order to support location transparency to engineer. The proposed simulator running in the web browser. This simulator can be use the engineer as well as public user through web browser.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.1
• /
• pp.22-29
• /
• 2003

The study was to evaluate psychological and physiological changes of simulator sickness in the controlled condition of driving a car (1 hr. at speed of 60 km/h) in a graphic simulator. Simulator sickness was measured and analyzed every 5 min using both subjective responses(i.e., Simulator Sickness Questionnaire) and Physiological signals(EEG, HRV, Skin Temperature, GSR). The results showed that there was significant differences in subjective response 10 min after the main experiment. From 10 min after the driving, the level of subjective simulator sickness increased significantly, relative one of the rest condition. There also was significant differences in physiological responses between the rest and the 5 min after from the start of driving : for EEG, $\delta$ and $\theta$ at Fz area increased, while $\alpha$ decreased; the averaged R-R interval and skin temperature decreased; LF/HF and GSR increased. The results indicated that simulator sickness was induced by activation of the autonomic nerves and inactivation of the central nerves.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.373-376
• /
• 2001

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the ability to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed system embodies a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. we develop a virtual simulator system on Window 98/NT environment of Microsoft, operating system using of the greater part of PC user. Window program have a merit making GUI environment that programmer can use without the expert knowledge about hardware. A suer with the simulator can utilize an interface that makes one to manage the separate task process for each manufacturing module, change operator components and work cells, and easily teach tasks of each task module.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.191-191
• /
• 2000

Hydraulic servo system is difficult to be made up and each component is very expensive, it takes long for actual system to make and test and it costs a high price. Because of these characteristics of hydraulic servo system, a real time simulator that could describe behavior of real system is highly demanded, without composing real hydraulic system. So, many studies have been (lone on these subjects and many simulators are developed with superiority. Since the nonlinearity of a hydraulic system common simulator have composed of many calculative times byusing DSP(Digital Signal processing) and have made it possible to find the situations of the system in real time, calculating hydraulic simulation and controller separately. In this study, we suggest real-time simulator that could describe real system without ordinary DSP card. This simulator is composed of 80196kc and personal computer. DSP card that has calculated complex numerical equation is supplanted by personal computer and 80196kc generates control signals independently out of the personal computer. In all process, personal computer is synchronized with one-board microprocessor within sampling time in the closed loop system. This makes it possible to be described in hydraulic servo system in real time. And to make a comparison between the result of the real-time simulator and a hydraulic servo system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.192-199
• /
• 2004

Navigation simulators have been used in many marine schools and manne training centers since the early 1960's. But these simulators were very expens~ve and were almost limited only in one engine system. In this paper, a catamaran with twin engine system. controlled by two remote control levers and its economic simulator based on a personal computer shall be introduced. One of the main features of catamaran is to control variously its progressing direction. In the static state, a catamaran can move into all the directions and in the dynamic state, ship can change immediately the heading and speed. Although a good navigator can skillfully operate one engine system, it is difficult to control smoothly the catamaran of twin engine system without any threat for the safety of passengers. Thus. in order to bring up the expert navigators. the development of a simulator which makes the training effective is necessary, Therefore, in this paper, a Fuzzy Inference Technique based Maneuvering Simulator for catamaran with twin engine system was developed. In general. in order to develop a catamaran simulator for effective training, first of all. its mathematical model must be acquired. According to the acquired system modeling. the dynamics of simulator is determined, But the proposed technique can omit a complex and tedious mathematical modeling procedures by using the fuzzy inference, which dependent upon only experiences of an expert and can design an efficient training program for unskillful navigators. This developed simulator was consisted of two fuzzy inference routines and two remote control levers, and was focused on effective training of navigators for the safe maneuvering to avoid a collision in a harbor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.103-103
• /
• 2000

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the agility to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed unit simulator can construct a proper virtual manufacturing line along with the required process of products using several kinds of operator and work cell. A user with the simulator can utilize an interface that makes one to manage the separate task process for each manu(acturing module, change operator components and work cells, and easily teach tasks of each task module. The developed simulator was made for users convenience by Microsoft Visual C++ 6.0 that can develop a program supplying graphic user interface environment and by OpenGL of the Silicon Graphics as a graphic library to embody 3D graphic environment. Also, we show that the simulator can be used efficiently for the agile manufacturing by the communication among the factories being linked by TCP/IP and a hybrid database system made by a hierarchical model and a relational model being developed to standardize the data information.