• 한국표면공학회지
• /
• 제39권4호
• /
• pp.153-159
• /
• 2006

Nanodiamond films were deposited on Si substrate by introducing a time dependent on/off modulation of $CH_4\;and\;O_2$ flows in a vertical-type microwave plasma enhanced chemical vapor deposition system. Surface morphology and diamond quality of the film were investigated as a function of the on/off modulation time interval. The diamond nucleation density on the substrate was enhanced under low temperature and low pressure condition. In addition, the diamond nucleation density was enhanced by increasing the on/off modulation time interval. Enhanced diamond quality was noticeable under the condition of a longer on/off modulation time interval. It was suggested that the nanodiamond nuclei formed the cluster formation.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권1호
• /
• pp.13-17
• /
• 2006

In this paper, the RCF(Resistive Companion Form) analysis method which is used to analyze small signal stability problems of non-continuous systems including switching devices. The RCF analysis method is mathematically rigorous and computes eigenvalue of the system periodic transition matrix based on discrete system analysis method. As an effect of switching operations, the eigenvalues of the systems are changed and newly unstable oscillation modes may be occurred. As an illustrating example, the oscillation modes of the system with different switching time intervals are computed exactly by the RCF analysis method and the results show that ON/OFF time intervals of switching equipments are important factors to make the system stable or unstable. This result shows that the RCF analysis method is very powerful to analyze small signal stability problems of power systems including switching devices such as FACTS equipments.

• 산업공학
• /
• 제18권4호
• /
• pp.494-503
• /
• 2005

This paper considers the problem of performance analysis for the multiplexer, when homogeneous periodic on-off sources are statistically multiplexed. Periodic on-off source model is defined that on-period and off-period are repeated by once in a deterministic periodic time and in on-period, cell arrives with deterministic time interval. In order to reflect periodicity of source model, we consider two multiplexing situation, such as random multiplexing and synchronized multiplexing. In both case, we obtain the overload-period distribution in the multiplexer, and an approximate method using the overload period distribution is suggested for obtaining the CLP(Cell Loss Probability) in the buffer of the multiplexer. A numerical example using MPEG-I real traffic samples and the results are also presented.

• 한국응급구조학회지
• /
• 제16권1호
• /
• pp.81-90
• /
• 2012

Objectives: This study is to research delay time comparison for later defibrillation after hands off according to the changes in defibrillation electrodes. Study purpose: In defibrillation treatment that is the only way for cardiac arrest by arrhythmia, it is to find defibrillator device which can minimize late defibrillation delay time after important affect of hands off. Study object and method: After hands off according to the defibrillator device, we collected total 40 people for emergency medicine doctor, internal medicine doctor, general surgeon, nurse, emergency medical technician who are working at 2 CN, CS University hospitals in Gwangju Jeollanamdo district to find out hand off shock interval(HOSI). We then researched their general properties like occupation sector, experiences in clinic, gender, completion of AHA ACLS-P training and more. Then 40 participants continued ventricular fibrillation cardiac arrest simulation training (using human-model mannequin) designed by researcher and performed their roles as defibrillation operator. Each of participant used manual paddle and performed 4 times of defibrillation (150J) during 8 minutes of CPR and in 8day, the defibrillator devices were replaced from manual paddle to self-adhesive electrodes pads and 4 times of defibrillation (150J) under same simulation condition as manual paddle were performed. Study result: In comparison for delay time of later defibrillation after hands off of manual paddle and self adhesive electrodes pad, the self adhesive electrodes pad ($7.0{\pm}0.5sec$) seemed to reduce delay time of later defibrillation significantly (p<0.05) compared to manual paddle ($10.0{\pm}0.9sec$). The self adhesive electrodes pad, according to the general properties of participants, had no particular change in delay time after later defibrillation for the statistics (p>0.05) but the manual paddle had statistically significant differences for the occupation sector, experiences in clinic and gender (p<0.05). Conclusion: In defibrillation, the self adhesive electrodes pad($7.0{\pm}0.5sec$) showed short HOSI compared to manual paddle ($10.0{\pm}0.9sec$) significantly (p<0.05) and it applied identically for both existence and non-existence of ACLS-P training completion, experiences in clinic, gender and occupation sector. The manual paddle had also significant difference in experiences in clinic and occupation sector (p<0.05). which means the effect on HOSI according to the job mastery. Therefore, if the clinic experience is short or in case for the occupations without frequent defibrillation treatment has a danger of lowering success rate for the defibrillation using manual paddle. Therefore, it is true that using self adhesive electrodes pad for defibrillation electrodes when performing manual defibrillation in pre-hospital as well as in-hospital steps can generally minimize delay time of later defibrillation after hands off.

• 대한물리의학회지
• /
• 제15권1호
• /
• pp.43-54
• /
• 2020

PURPOSE: This study examined the effects of mild-intensity exercise (MIE) and high-intensity interval exercise (HIIE) on the recovery of the motor function over time in sciatic nerve crush injury rats. METHODS: The MIE group ran on a treadmill at a speed of 8.3 m/min to perform low-intensity training with maximum oxygen uptakes ranging from 40 to 50%. The HIIE group ran on the treadmill at a speed of 25 m/min to perform high-intensity training with a maximum oxygen uptake of 80%. The interval training was performed based on a 1:1 work-to-rest ratio. The effects of each form of exercise on the rats' walking abilities following their recovery from the peripheral nerve injuries were evaluated based on the results of behavior tests performed at one and 14 days. RESULTS: According to the test results, the MIE group showed significant improvements in the rats' ankle angle in the initial stance phase, and in the ankle and knee angles in the toe-off phase (p<.05). The HIIE group exhibited significant improvements in the ankle and knee angles in the initial stance phase, SFI(p<.05). CONCLUSION: The state of such patients can be improved by applying the results of this study in that MIE and HIIE on a treadmill can contribute to the recovery of the peripheral nerve and motor skill. In particular, MIE is used as a walking functional training in the toe-off stance phase, while HIIE is suitable in the initial stance stage.

• Journal of the Korean Statistical Society
• /
• 제29권3호
• /
• pp.319-336
• /
• 2000

A mixed model with a white noise process and an IMA(0,1,1) process is considered as a process model. It is assumed that the process is a white noise in the absence of a special cause and the process changes to an IMA(0,1,1) due to a special cause. One useful scheme in measuring the process level is to use the variable measurement interval (VMI) between measurement times according to the value of the previous chart statistic. The advantage of the VMI scheme is to measure the process level infrequently when in control to save the measurement cost and to measure frequently when out of control to save the off-target cost. This paper considers the VMI scheme in order to detect changes in the process model from a white noise to an IMA(0,1,1). The VMI scheme is shown to be effective compared to the standard fixed measurement interval (FMI) scheme in both statistical and economic contexts.

• 한국안전학회지
• /
• 제37권1호
• /
• pp.12-19
• /
• 2022

Circuit breakers are a crucial factor in ensuring the safety of a Direct Current (DC) grid. One type of DC circuit breaker, the Z-source DC circuit breaker (ZCB), uses a thyristor, which is a type of semiconductor switch. In the event of a fault in the circuit, the ZCB isolates the fault by generating a zero crossing current in the thyristor. The thyristor quickly and actively isolates the fault while generating a zero crossing current, but thyristor switch cannot control turn-off and the allowable current is lower than the current of the mechanical switch. Therefore, it is best to use a mechanical switch with a high allowable current capacity that is capable of on/off control. Due to the slow reaction time of mechanical switches, they may not isolate the fault during the zero crossing current time interval created by the existing circuit. In this case, the zero crossing current time can be increased by using the property that hinders the rapid change in the current of the inductor. This paper will explore whether adding system inductance to increase the zero crossing current time interval is a solution to this problem. The simulation of changing inductor and capacitor (LC) of the circuit is repeated to find an optimal change in the zero crossing current time according to the LC change and provides an inductor and capacitor range optimized for a specific load. The inductor and capacitor range are expected to provide optimization information in the form LC values for future applications of ZCB's using a mechanical switch.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.42-49
• /
• 1996

The author examined the response of Armorclad rockfish, Sebastes hubbsi [MATSUBARA]to the surface attracting lamps (0.5W, 0.8W, 1W) line in the experimental water tank ($550L{\times}58W{\times}73H$cm). The attraction rate was investigated in accordance with the intervals of lighting and putting out hour (1,5 minute) when each of the attraction lamps was gradually switched off after they were switched on all at once. The results are as follows : 1. Total distribution rate of fish in the illuminated section was 61.6%(mean 12.3%) in case of 1 minute interval, and 41.0%(mean 8.2%) in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section : \circled1Distribution rate at interval of 1 minute were 12.7% in 0.8W, 12.4% in 0.5W and 11.9% in 1 W respectively. \circled2Distribution rate at interval of 5 minutes were 9.0% in 1W, 8.6% in 0.8W and 7.0% in 0.5W respectively. 3. Attraction rates of the last section showed a little increasing as illuminating time elapsed. A difference of attraction rates according to lighting source in 1 minute interval was bigger than that in 5 minute interval. 4. Attraction rate of fish in only last section switched on : \circled1Attraction rate at interval in case of 1 minute were 52.0% in 0.8W, 46.7% in 0.5%W and 45.3% in 1W respectively. \circled2Attraction rate at interval in case of 5 minutes were 32.0% in 1W, 24.0% in 0.8W and 14.7% in 0.5W respectively.

• 수산해양기술연구
• /
• 제34권3호
• /
• pp.302-308
• /
• 1998

The author examined the response of Yoroi-mebaru, Sebastes hubbsi [MATSUBARA] to the underwater attracting lamps (0.5 W, 0.8 W, 1 W) line in the experimental water tank (550 L x 58 W x 73 H cm). The attracting rate investigated in accordance with the intervals of lighting and putting out hour (1, 5 minutes) when each of the underwater attracting lamps was gradually switched off after they were switched on all at once. The results are a follows: 1. Distribution rates of fish in the illuminated area was 35.7 % in case of 1 minute interval, and 50.3 % in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section: \circled1 Distribution rates at interval of 1 minute were 9.8 % in 1 W, 6.5 % in 0.8 W and 5.1 % in 0.5 W, respectively. \circled2 Distribution rates at interval of 5 minutes were 15.6 % in 1 W, 8.5 % in 0.5 W and 6.1 % in 0.8 W, respectively. 3. Attracting rates of the last section showed a little increasing as illuminating time elapsed. A difference of attracting rates according to lighting source in 5 minutes interval were bigger than that in 1 minute interval. 4. Attracting rates of fish in only last section switched on: \circled1 Attracting rates at interval in case of 1 minute were 30.0 % in 0.8 W, 16.0 % in 1 W and 8.0 % in 0.5 W, respectively. \circled2 Attracting rates at interval in case of 5 minutes were 56.0 % in 1 W, 30.7 % in 0.5 W and 10.7 % in 0.8 W. respectively.

• 수산해양기술연구
• /
• 제28권3호
• /
• pp.243-251
• /
• 1992

The author examined the response of File fish, Stephanolepis Cirrhifer (TEMMINCK et SCHLEGEL) to the surface attracting lamps(0.5W, 0.8W, 1W) line in the experimental water tank (550L$\times$58W$\times$73H cm). the attracting rate was investigated in accordance with the interval of lighting and putting out hour (1, 5 minute)when each of the attracting lamps was gradually switched off after they were switched on all at once. The results are as follows: 1. Total distribution rate of fish in the illuminated section was 96.9%(mean 19.4%) in case of 1 minute interval, and 98.4%(mean 19.7%) in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section: \circled1 Distribution rate at interval of 1 minute were 19.9% in 0.8W, 19.3% in 1W and 18.9% in 0.5W respectively. \circled2 Distribution rate at interval of 5 minutes were 19.8% in 1W, 19.8% in 0.8W, and 19.5% in 0.5W respectively. 3. Attracting rate of the last section showed increasing as illuminating time elapse without interval and lighting source. 4. Attracting rate of fish in only last section switched on: \circled1 Attracting rate at interval in case of 1 minute were 98.0% in 1W, 97.0% in 0.5W and 83.0% in 0.8W respectively. \circled2 Attracting rate at interval in case of 5 minutes were 99.3% in 1W, 97.3% in 0.5W and 93.3% in 0.8W respectively.