• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1161-1166
• /
• 2017

Recently, with the development of display technology, AMOLED(Active Matrix OLED) panel production and demand are increasing. Unlike LCD, AMOLED panel basically does not need backlight, so it can output clear images with low power consumption. Therefore, the AMOLED market is growing globally. Accordingly, the demand for inspection devices required for production is also expanding. The inspection device of the AMOLED panel aging system operates in conjunction with MES(Manufacturing Execution System) and MIS(Management Information System), and it is efficient to construct network environment. The inspection device used for panel aging is a pattern generator capable of outputting multiple signals. Efficient design is required to operate multiple signal generators. To solve this problem, the proposed system proposed a method for remotely controlling the signal generator remotely and a method for driving the AMOLED panel. And the timing and power setting results are presented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.451-456
• /
• 2013

To study emission properties of white phosphorescent organic light emitting devices (PHOLEDs), we fabricated white PHOLEDs of ITO(150 nm) / NPB(30 nm) / TcTa(10 nm) / mCP(7.5 nm) / light-emitting layer(25 nm) / UGH3(5 nm) / Bphen(50 nm) / LiF(0.5 nm) / Al(200 nm) structure. The total thickness of light-emitting layer with co-doping and blue-doping/co-doping using a host-dopant system was 25 nm and the dopant of blue and red was FIrpic and $Bt_2Ir$(acac) in UGH3 as host, respectively. The OLED characteristics were changed with position and thickness of blue doping layer and co-doping layer as light-emitting layer and the best performance seemed in structure of blue-doping(5 nm)/co-doping(20 nm) layer. The white PHOLEDs showed the maximum current density of $34.5mA/cm^2$, maximum brightness of $5,731cd/m^2$, maximum current efficiency of 34.8 cd/A, maximum power efficiency of 21.6 lm/W, maximum quantum efficiency of 15.6%, and a Commission International de L'Eclairage (CIE) coordinate of (0.367, 0.436) at $1,000cd/m^2$.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.4
• /
• pp.7-11
• /
• 2008

ITO (Indium Tin Oxide) thin films have been extensively studied for OLED devices because they have high transparent properties in the visible wavelength and a low electrical resistivity. These ITO films are deposited by rf-magnetron sputtering under different ambient gases (Ar, Ar+$O_2$ and Ar+$H_2$) at $300^{\circ}C$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon has been changed from 0.5sccm to 5sccm and from 0.01sccm to 0.25sccm respectively. The resistivity of ITO film increased with increasing flow rate of $O_2$ under Ar+$O_2$ while it is nearly constant under Ar+$H_2$. And the peak of ITO films obtained (222) and (400) orientations and the average transmittance was over 80% in the visible range. The OLED device fabricated with different ITO substrates made by configuration of ITO/$\alpha$-NPD/Alq3/LiF/Al to elucidate the performance of ITO substrate for OLED device.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.263-270
• /
• 2018

Recently, porous ceramic materials with anti-static performance are urgently needed for semiconductor and OLED/LCD display manufacturing industry. In this work, we fabricated porous titanium manganese oxide ceramics having the surface resistivity of $10^8-10^{10}$ ohm and enhanced mechanical strength by partial sintering method using nanosized titanium oxide. By addition of nano-sized titanium oxide in the matrix, neck formation between grains was strengthened, which remarkably increased flexural strength up to 170 MPa (@porosity: 15 %), 110 MPa (@porosity: 31 %), compared to 80 MPa (@porosity: 26 %) for pristine titanium manganese oxide ceramics. We evaluated the performances of our ceramics as air-floating module for OLED flexible display manufacturing devices.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.562-567
• /
• 2017

The organic light-emitting diodes are fabricated with six anthracene derivatives containing simple substituents such as phenyl or naphthyl group. The device structure is as in the following: Indium tin oxide (ITO) (180 nm)/4,4-4,4',4"-tris[N-(1-naphthyl)-N-phenylamino]triphenylamine (2-TNATA) (30 nm)/4,4'-bis[N-(1-naphthyl)-N-phenyl-1-amino] biphenyl (NPB) (20 nm)/Emitting compound (30 nm)/2,2',2"-(1,3,5-Benzinetriyl)-tris (1-phenyl-1-H-benz-imidazole) TPBi (40 nm)/lithium quinolate (Liq) (2 nm)/Al (100 nm). In the emitting layer the anthracene derivatives are used without any dopant. All the six devices show blue emissions. Among the tested diodes, the one with 9-(2-naphthyl)-10-(p-tolyl) anthracene (2-NTA) exhibited luminous efficiency, power and external quantum efficiencies of 3.26 cd/A, 0.98 lm/A, 2.8 % at $20mA/cm^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1437-1439
• /
• 2007

We fabricated white organic light emitting device (WOLED) with the layered fluorescent blue material and phosphorescent green/red dye-doped materials. Addition of the non-doped phosphorescent host material between the fluorescent and phosphorescent light emitting layers provided the result of broadband white spectrum, with improved balance, higher efficiency, and lower power consumption. In our devices, there was no need of exciton-blocking layer between the each emission layer for the further confinement of the diffusion of excitons.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.351-354
• /
• 2006

We developed highly efficient fluorescent dopants for full-color OLEDs. For blue, green and red OLEDs, current efficiencies of 8.7cd/A, 20.5 cd/A and 11.4 cd/A at $10mA/cm^2$ were achieved, respectively. Lifetime of the blue device was estimated to be 23,000hours at an initial luminance of $1,000cd/m^2$. Moreover, long lifetime over 100,000 hours was estimated in the green and red devices. Furthermore, we obtained a three-component white OLED by using these new fluorescent materials. This white OLED shows a current efficiency of 16.1cd/A with extrapolated lifetime over 70,000 hours at $1,000cd/m^2$, and more excellent color reproducibility for full-color displays with color filters and general lighting, compared to previous fluorescent white OLEDs.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1183-1189
• /
• 2012

Organic light-emitting diodes (OLEDs) using microcavity effect have attracted great attention because they can reduce the width of emission spectra from organic materials, and enhance brightness from the same material. We demonstrate the simulation results of the radiation properties from top-emitting organic light-emitting diodes (TE-OLEDs) with microcavity structures based on the general electromagnetic theory. Organic materials such as N,N'-di (naphthalene-1-yl)-N,N'-diphenylbenzidine (NPB) as a hole transport layer and tris (8-hydroxyquinoline) ($Alq_3$) as emitting and electron transporting layer are used to form the OLEDs. The organic materials were sandwiched between anode such as Ni or Au and cathode such as Al, Ag, or Al:Ag. The devices were characterized with electroluminescence phenomenon. We confirmed that the simulation results are consistent with experimental results.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.1
• /
• pp.33-38
• /
• 2009

We have investigated the effect of the ambient gases on the characteristics of AZO thin films for the OLED (organic light emitting diodes) devices. These AZO thin films are deposited by rf-magnetron sputtering under different ambient gases (Ar, Ar+$O_2$, and Ar+$H_2$) at 300. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.2sccm to 1sccm and from 0.5sccm to 5sccm, respectively. The AZO thin films were preferred oriented to (002) direction regardless of ambient gases. The electrical resistivity of AZO film increased with increasing flow rate of $O_2$ under Ar+$O_2$ while under Ar+$H_2$ atmosphere the electrical resistivity showed minimum value near 1sccm of $H_2$. All the films showed the average transmittance over 80% in the visible range. The OLED device was fabricated with different AZO substrates made by configuration of AZO/$\acute{a}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of AZO substrate.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.594-598
• /
• 2011

We study on the preparation of green emitting materials for organic light emitting device. 3-chromonealdehyde derivatives possessing a conjugated structure, which were composed of electron acceptor of 3-chromonealdehydes and electron donor of diamines, were synthesized by dehydration-condensation process. The structural properties of reaction products were analyzed FT-IR and $^1H-NMR$ spectroscopy. The thermal stabilities and reactivities were measured by melting points and yields. The UV-visibles and PL properties can be determined by excitation spectra and emission spectra, respectively.