• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.877-880
• /
• 2005

As DMB, 3D game, Internet and movie is serviced for the recent mobile devices, high resolution display devices beyond VGA become used. Implementation of real-time moving pictures of 30렌 by software programming is difficult because the performance of mobile processors is not so high. The full frame moving picture can be supported by using specific hardware. In this paper, an OLED controller that is consists of flash memory controller and OLED interface is proposed for real-time moving picture on mobile displays. The proposed OLED controller is implemented in FPGA and the performance is evaluated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1030-1033
• /
• 2005

Today's most equipments that contain embedded system only support simple menus and background graphics. However, as the embedded system is applied for much more various fields and the user's needs for graphical interface become higher, the support for multimedia and moving pictures became an important criterion to evaluate the performance of a equipment. Because the present embedded system uses software to construct display environment, it is difficult to meet the bandwidth for multimedia contents and moving pictures. Using software for graphic also lowers the performance of the main function by overloading the processor. In this paper, we present an OLED/TFT-LCD controller suitable for embedded systems. The architecture we propose is described in HDL and the performance is evaluated in comparison with the existing embedded systems.

• Journal of Semiconductor Engineering
• /
• v.3 no.1
• /
• pp.154-160
• /
• 2022

In this paper, we design a DC-DC boost converter with RF noise immunity to supply a stable positive output voltage for OLED displays. For RF noise immunity, an input voltage variation reduction circuit (IVVRC) is adopted to ensure display quality by reducing the undershoot and overshoot of output voltage. The boost converter for a positive voltage Vpos operates in the SPWM-PWM dual mode and has a dead-time controller using a dead-time detector, resulting in increased power efficiency. A chip was fabricated using a 0.18 um BCDMOS process. Measurement results show that power efficiency is 30% ~ 76% for load current range from 1 mA to 100 mA. The boost converter with the IVVRC has an overshoot of 6 mV and undershoot of 4 mV compared to a boost converter without that circuit with 18 mV and 20 mV, respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.853-858
• /
• 2020

This paper proposes a 2-ch DC-DC converter for OLED display with immunity against RF noise inserted from communication device. For RF signal immunity, an input voltage variation reduction circuit that attenuates as much as the input voltage variation is embedded. The boost converter for positive voltage V_POS operates in SPWM-PWM dual mode and has a dead time controller to increase power efficiency. The inverting charge pump for negative voltage V_NEG is a 2-phase scheme and operates in PFM using VCO to reduce output ripple voltage. Simulation results using 0.18 ㎛ BCDMOS process show that the overshoot and undershoot of the output voltage decrease from 10 mV to 2 mV and 5 mV, respectively. The 2-ch DC-DC converter has power efficiency of 39%~93%, and the power efficiency of the boost converter is up to 3% higher than the conventional method without dead time controller.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.673-675
• /
• 2004

This study proposes controller with voltage-compensated drivers for producing gray-scaled pictures on passive matrix organic light emitting diodes (PMOLEDs) panels. The controller includes voltage type drivers so the output impedance of the driver is far less than that of the current-type driver. Its low output impedance provides better electron-optical properties than those of traditional current drivers. A free running clock and a group of counters are applied to the gray-scaled function so that phase lock loop (PLL) circuit can be reduced in the controller. A pre-charge function is used to enhance performance of the luminance of an active OLED pixel. As a result, distribution of the low gray level portion is achieved linear relationship with input data. In this work, the digital part of the proposed controller is implemented using FPGA chips, and analog parts are combined with a digital-analog converter (DAC) and analog switches. A still image is displayed on a $48^{\ast}64$ PMOLEDs panel to assess the luminance performance fir the controller. Based on its cost requirement and luminance performance, the controller is qualified to join the market for driving PMOLEDs panels.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.70-76
• /
• 2009

Web tension control system recently have been applied to OLED(Organic Light-Emitting Diode), RFID of flexible material, e-Paper and PLED(Polymeric LED) and various web control algorithms have being developed for higher productivity and product quality These system need an accuracy model to design and implement controller. In this paper, the web tension control system with dancer roll is mathematically modeled. Mathematical model consists of 8 subsystems and each subsystems can be described as impedance structure which connected by velocity and tension. Mathematical model is different from the estimated model at high frequency range because of structure dynamics which is ignored on mathematical model. The estimated model is derived using ARMAX model. The controller is designed using the estimated model. The step response of the estimated model are compared with that of physical model for a validation of estimated model. The experimental results show a good match between them.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.944-949
• /
• 2017

Recently, the demand of maglev systems in the manufacturing industry for LCD and OLED display panels, which are required to be very clean and possess vacuum systems, has been increasing due to their characteristics such as being non-contact, noise free and eco-friendly. However, it is still a challenge to simultaneously control both the propulsion and levitation for their interactive effect difficult to be exactly measured. In this paper, we proposed a new tuning method for controlling the magnetic levitation force robustly against the levitation disturbance caused by a propulsion system, based on LQ servo optimal control. The disturbance torque of the LSM propulsion system is calculated through FEM analysis in such a way that the LQ servo controller is determined in order to minimize the effect of the disturbance. The robust performance of the proposed LQ servo control method for the in-track type magnetic levitation systems is demonstrated via simulations and experiments.