• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.10a
• /
• pp.10-10
• /
• 2003

• Proceedings of KHEA Conference
• /
• 1997.07a
• /
• pp.97-97
• /
• 1997

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1172-1174
• /
• 2009

Color sequential display is a well know technology. Hower, due to the slow response time of LC,the CSD has not been used in LCD. We have developed a unique LC color display, which can improve LC response time, improve the driving system, improve the gamma drive issue and increase the color gamut to more than NTSC120%.It also can get very low power consumption merit.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.831-838
• /
• 2004

A fluid-solid conjugate solver has been newly developed and applied to an actual engine disk system. Most of the currently available conjugate solvers lack the special thermal modeling for turbomachinery disk system applications. In the present new code, these special models are implemented to expand the applicability of the conjugate method and to reduce the required computational resources. Most of the conjugate analysis work so far are limited to the axisymmetric framework. However, the actual disk system includes several non-axisymmetric components which inevitably affect the local heat transfer phenomena. Also the previous work devoted to this area usually concentrate their efforts on the steady-state thermal field, although the one in the transient condition is more critical to the engine components. This paper presents full 3D conjugate analysis of a single stage high pressure turbine rotor-stator disk system to assess the three-dimensional effects (Fig. 1). The analysis is carried out not only in the steady-state but also in the engine accelerating transient condition. The predicted temperatures shows good agreement with measured data.

• Industrial Engineering and Management Systems
• /
• v.9 no.4
• /
• pp.294-302
• /
• 2010

There is a trend toward the world's manufacturing sites moving to East Asia. After manufacture, these products are transported to the advanced nations for their consumption demands. Among such advanced nations, the U.S.A. has the largest demand, and then Japan and European countries follow. It should be noted that the infrastructures of the Asian districts used for the production sites are rather limited, and the volume of products transported from these districts of Asia to the U.S.A is becoming tremendously large. This situation is causing very serious traffic problems. New products are required to be transported swiftly by air. Once the consumption and market demands are stable however, the products should be sent rather slowly, but in larger amounts. However, the airports of China are quite restricted in capacity, while the transportation volume is becoming large. As a result, transportation cost and the time required for transportation are increasing. Now, a third method is appearing. This is the so-called Sea and Air transportation. The cost and time in transit of this mode take mean positions between Air and Ocean services. At present there exists no well-thought-out strategy for how to allocate these three methods of transportation. This paper is an attempt to theoretically describe this mechanism and to discover the optimal way to allocate the three modes. For this purpose, several mathematical properties of value and cost of the products are defined, and on this basis a simulation of the transportation is established.

• Journal of Information Technology Services
• /
• v.5 no.1
• /
• pp.111-128
• /
• 2006

It was on the rise importantly to provide the efficient management process of the organization for dealing with the change about information and business management quickly and consistently. It was suggested with the architectural model on information technology to provide it in theoretically. The Federal Government and budget organization of the USA used it on actual business and the terms of EA (Enterprise Architecture) and are raising the efficiency of management. NCA (National Computerization Agency) of Korea published the book - "The Research about establishing ITA (Information Technology Architecture) and appling the standards". After being applied the model on MOGAHA (Ministry of Government Administration and Home Affairs) and MIC(Minisstry of Information and Communication), the concrete case was made. MOMAF (Ministry of Maritime Affairs and Fisheries) drove the leading model. The report ascertained the basic contents of ITA and researched the case of USA, MOGAHA, MIC, and tried to analyze the contents of appling maritime and fisheries area. The report contained the definition of purpose through analyzing environment and establishing the vision and the principles based on them. The report also contained the contents of architecture based on the standard of NCA - "The Government Standard Meta Model version 2.0" - and researched the MOMAF's Reference model using Government Reference model. The report established the investment architecture and the process of information technology asset management. It ascertained the characteristic of maritime & fisheries area and the subject of developing the MOMAF's ITA sustainably.

• Advances in Energy Research
• /
• v.6 no.1
• /
• pp.35-54
• /
• 2019

A successful blade design must satisfy some criterions which might be in conflict with maximizing annual energy yield for a specified wind speed distribution. These criterions include maximizing power output, more resistance to fatigue loads, reduction of tip deflection, avoid resonance and minimize weight and cost. These criterions can be satisfied by modifying the geometrical parameters of the blade. This study is dedicated to the aerodynamic assessment of a 20 kW horizontal axis wind turbine operating with two possible airfoils; that is $G{\ddot{o}}ttingen$ 413 and NACA 2415 airfoils (the Gottingen airfoil never been used in wind turbines). For this study parameters such as chord (constant, tapered and elliptic), twist angle (constant and linear) are varied and applied to the two airfoils independently in order to determine the most adequate blade configuration that produce the highest annual energy output. A home built numerical code based on the Blade Element Momentum (BEM) method with both Prandtl tip loss correction and Glauert correction, X-Foil and Weibull distribution is developed in Matlab and validated against available numerical and experimental data. The results of the assessment showed that the NACA 2415 airfoil section with elliptic chord and constant twist angle distributions produced the highest annual energy production.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.308-310
• /
• 2002

Bacteriorhodopsin (bR) and halorhodopsin (hR), which exist in the membrane of Halobacterium salinarum, are light-driven ion pumps. In spite of high similarity of primary and tertiary structures between bR and hR, these membrane proteins transport different ions, proton and chloride, in the opposite direction. From alignment of the amino acid sequences, Thr-89 of bR is homologous to Ser-l15 of hR from Halobacterium salinarum (shR). X-ray structure of shR has revealed that OH group of this residue directly interacts with CI$\^$-/ Thus, Ser-lI5 of shR is expected to play an important role in CI$\^$-/ binding and transport. In this study, we expressed wild type hR from Natronobacterium pharaonis (PhR) and Sl30A, which corresponds to Ser-l15 of shR, in E. coli in order to clarify binding affinity of chloride ion and photocycle reactions. From the titration with CI$\^$-/, affinity of Sl30A became quite lower than that of WT (WT 6 mM, Sl30A 89 mM). Furthermore, from the flash photolysis with pulse laser of λ$\_$max/ at 532 nm, the reaction rate of SI30A from 0 intermediate to hR ground state was found to become apparently slower than that of WT. The singular value decomposition (SVD) and global fitting analyses of the photocycles were performed to identify all photointermediates and determine the reaction rates.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.539-543
• /
• 2016

Background: It is well known that peritoneal carcinomatosis (PC) from colorectal cancer (CRC) is associated with a poor prognosis. However, data on the prognostic significance of modern chemotherapy containing bevacizumab, cetuximab or panitumumab are not available. Materials and Methods: This retrospective review concerned 526 patients with metastatic CRC who were classified into two groups according to the presence or absence of PC, and were treated with systemic chemotherapy, with or without bevacizumab or anti-EGFR antibodies. The genetic background, in particular KRAS, BRAF, and PIK3CA gene mutations, and overall survival (OS) were compared between the two groups. Results: The median OS values were 23.3 and 29.1 months for PC and non-PC patients, respectively (hazard ratio [HR]=1.20; p=0.17). Among all patients, tumor location, number of metastatic sites and BRAF mutation status were significant prognostic factors, whereas the presence of PC was not. In the PC group, chemotherapy with bevacizumab resulted in a significantly longer OS than forchemotherapy without bevacizumab (HR=0.38, p<0.01), but this was not the case in the non-PC group (HR=0.80, p=0.10). Furthermore, the incidence of the BRAF V600E mutation was significantly higher in PC than in non-PC patients (27.7% versus 7.3%, p<0.01). BRAF mutations displayed a strong correlation with shorter OS in non-PC (HR=2.26), but not PC patients (HR=1.04). Conclusions: Systemic chemotherapy, especially when combined with bevacizumab, improved survival in patients with PC from CRC as well as non-PC patients. While BRAF mutation demonstrated a high frequency in PC patients, but it was not associated with prognosis.

• Journal of Plant Biotechnology
• /
• v.1 no.1
• /
• pp.20-30
• /
• 1999

In order to modify lipid production of Perilla qualitatively as well as quantitatively by genetic engineering, genes involved in carbon metabolism were isolated and characterized. These include acyl-ACP thioesterases from Perilla frutescens and Iris sp., four different $\beta$-ketoacyl- ACP synthases from Perilla frutescens, and two $\Delta$15 a-cyl-ACP desaturases(Pffad7, pffad3). Δ15 acyl-ACP desa turase (Δ15-DES) is responsible for the conversion of linoleic acid (18:2) to $\alpha$-linolenic acid (ALA, 18:3). pffad 3 encodes Δ15 acyl-desaturase which is localized in ER membrane. On the other hand, Pffad7 encodes a 50 kD plastid protein (438 residues), which showed highest sequence similarity to Sesamum indicum fad7 protein. Northern blot analysis revealed that the Pffad7 is highly expressed in leaves but not in roots and seeds. And Pffad3 is expressed throughout the seed developmental stage except very early and fully mature stage. We constructed Pffad7 gene under 355 promoter and Pffad3 gene under seed specific vicillin promoter. Using Pffad7 construct, Perilla, an oil seed crop in Korea, was transformed by Agrobacterium leaf disc method. $\alpha$-linolenic acid contents increased in leaves but decreased in seeds of transgenic Perilla. Currently, we are transforming Perilla with Pffad3 construct to change Perilla seed oil composition. We isolated three ADP-glucose pyrophosphorylase (AGP) genes from Perilla immature seed specific cDNA library. Nucleotide sequence analysis showed that two of three AGP (Psagpl, Psagp2) genes encode AGP small subunit polypeptides and the remaining (Plagp) encodes an AGP large subunit. PSAGPs, AGP small subunit peptide, form active heterotetramers with potato AGP large subunit in E. coli expressing plant AGP genes.