• 한국잠사곤충학회지
• /
• 제49권2호
• /
• pp.43-46
• /
• 2007

잠분의 기능성 소재 이용의 기초자료로 활용하고자 일반 건조잠분에 대하여 용매별로 추출방법을 달리하여 얻은 열수, 에탄올, 메탄올 추출물에 대한 일반성분 및 무기질, 아미노산 성분을 분석하였다. 추출용매 별 일반성분 분석 비교 결과, 조단백질과 조회분은 MeOH > EtOH > 열수 추출물 순으로 함량이 높게 나타났으며, 조지방은 EtOH > MeOH > 열수 추출 순으로 함량의 차이를 보였다. 무기질 분석 결과 잠분채취 시기와 상관없이 중요 영양윈소인 K, Fe, Ca, Mg등의 함량이 높게 나와 잠분이 중요 무기질 공급원이 될 수 있음을 알 수 있었다. 아미노산 함량 분석 결과, 용매를 달리한 추출물에 대한 전체 아미노산의 정량치는 열수용매 추출물이 가장 높게 나타났고 EtOH와 MeOH용매 추출물에서는 아미노산 함량 값에 큰 차이를 볼 수 없었다. 18종 아미노산 중 채취시기와 상관없이 열수 추출물에서는 Glu와 Asp의 함량이 가장 높았으며 다음으로 Gly > Ala > Leu > Thr > Ser 등의 함량 순을 나타내었다. 채취시기를 달리한 잠분추출물의 경우 역시 2004년 채취 잠분이나 2007년 당해 채취 잠분에서의 아미노산 함량은 큰 차이 없어 채취시기와 잠분의 성분변화와는 크게 상관이 없음을 알 수 있었다.

• 대한화학회지
• /
• 제56권6호
• /
• pp.673-678
• /
• 2012

변전위법과 선형분극법을 이용하여 Borate 완충용액에서 철의 부식에 대한 대기의 영향을 조사하였다. 철의 부식은 용액 속에 녹아있는 산소의 양에 크게 영향을 받았다. 용액에 녹아 있는 산소의 환원반응으로 환원전류가 증가하여 부식전위가 양의 방향으로 이동하였다. 물 또는 산소의 환원 반응에 의하여 생성된 $OH^-$ 이온은 철 전극의 전기이중층에 $OH^-$ 이온의 농도를 증가시켜 철 전극에 $OH^-$ 이온의 흡착을 용이하게 하였다. 철 전극 표면에 $OH^-$ 이온의 흡착은 Langmuir isotherm 또는 Temkin logarithmic isotherm을 이용하여 설명할 수 있었다.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.287-292
• /
• 1982

Nonohmic properties of ZnO ceramics with various small amounts of additives were studied in relation to experimental methods, additive contant and sintaring temperature. The kinds of additives used to following chemicals were basic additives ($0.5Bi_2O_3$, $0.3BaCO_3$, $0.5MnCO_3$, $0.5Cr_2O_3$, $0.1KNO_3$), $TiO_2$ and $Al(OH)_3$. Expecially, this study has focused on the effectsof $TiO_2$ and $Al(OH)_3$ in ZnO ceramics with the basic additives. SEM studies indicated that the addition of TiO2 promoted grain growth but retarded grain growth with the addition of $Al(OH)_3$. Also, in the case of calcination of ZnO with $TiO_2$ and ZnO with $Al(OH)_3$ previously, grain size of ZnO with $TiO_2$ was larger and that of ZnO with Al(OH)3 was smaller in comparison to the case with out calcination. From the viewpoint of nonohmic exponent and nonohimic resistance, electrical characteristics of ZnO, $TiO_2$ and the basic additives was more effective than that of ZnO, $Al(OH)_3$ and the basic additives. Nonohmic exponent and nonohmic resistance of ZnO, $TiO_2$ and the basic additives was 11-13 and 40-65 respectively.

• 천문학회보
• /
• 제38권2호
• /
• pp.64.1-64.1
• /
• 2013

High energy photons and mechanical energy produced by the process of star formation result in copious FIR molecular and atomic lines, which are important coolants of the system. Photons thermally or mechanically induced could dissociate water in the dense envelope to change relative abundances among the species O, OH, and H2O. Here we analyze OH emission lines toward embedded young stellar objects (YSOs) observed as part of the Herschel open time key program, 'Dust, Ice, and Gas In Time (DIGIT)' in order to study the physical conditions of associated gas and the energy budget loaded on the OH line emission. According to our analysis of the Herschel/PACS spectra, OH emission peaks at the central spaxel in most of sources, but several sources show spatially extended emission structures. In the extended emission sources, the distribution of OH emission is correlated with that of [OI] emission and extended along the outflow directions. Considering the diversity of source properties, ratios between detected OH lines are relatively constant among sources. In addition, each OH line has strong correlation with bolometric luminosity. For detail analyses with rotation diagram and non-LTE LVG model, we present the results from GSS30-IRS1 and Elias29.

• 분석과학
• /
• 제9권1호
• /
• pp.1-12
• /
• 1996

열에 불안정하면서 -OH기를 함유하는 미지의 화합물은 LC/TSP/MS에서 [${MNH_4}^+$] 이온, [$MH^+$] 이온, 그리고 [$MH^+-OH$] 이온의 생성이 가능하며, 이들 이온의 m/z값의 차이가 17로서 같기 때문에 이들의 생성 정도에 따라 분자량 추정에 혼란이 일어날 수가 있었다. 따라서 다른 보완 가능한 실험결과가 요구되며 $CF_3COOD+NH_4OH$ 이온화 용액을 사용하여 그 유용성을 검토하였다. 또한 LC/TSP/MS에서 생성되는 토막이온들이 필라멘트의 전자살에 의해 생성되는 것인지 아니면 다른 어떤 생성기전이 존재하는지를 검토하였다.

• 환경위생공학
• /
• 제15권1호
• /
• pp.95-101
• /
• 2000

This study was investigated to the reaction of alumina sintering with alkaline. The soluble $NaAlO_2$ was made after the commercial ${\alpha}-Al_2O_3$ was calcinated with NaOH. The reaction of alumina was carried out to be based on the effects of calcination temperature, time, and the mixing ratio of ${\alpha}-Al_2O_3/NaOH$. The alumina was calcined over $500^{\circ}C$ with NaOH powder after it was sieved with 170/270 mesh. The calcined alumina with NaOH powder was dissolved into $25^{\circ}C$ distilled water and filtrated, and HCI was added to adapt pH 6.5~7.5. The residue was separated with vacuum pump for filtration after it was adapted to proper pH, and aluminum compound was precipitated with $Al(OH)_3$. The investigation was carried out with the variables; the calcination temperature($500-900^{\circ}C$), the calcination time (30~90 min), and the concentration of HCI when leaching(0.5~3.0N) respectively. In this investigation, the main product of ${\alpha}-Al_2O_3$ and NaOH was $NaAlO_2$ and the maximum conversion ratio was 91.4% under the optimum conditions as followed ; the ratio of NaOH/${\alpha}-Al_2O_3$ was 1.5 and the calcination conditions were $800^{\circ}C$ and 90 min.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.47-54
• /
• 1994

Cotton fiber, NaOH-mercerized cotton fiber, cotton fabric, and NaOH-mercerized cotton fabric have been treated by liquid ammonia at -33.4$^{\circ}C$. The fine structures, bending properties, tensile strengthes, shrinkages for laundering, and wrinkle recoveries were studied. The treatment of cottons with liquid ammonia brought about the transition of crystal lattice ; transforming cellulose I crystal of original cotton to cellulose I and III crystal, and cellulose II crystal of mercerized cotton to cellulose II and III crystals. The degree of crystallinities were decreased in the order of liquid ammonia>NaOH/liquid ammonia>NaOH-treated cotton. However moisture regain and water absorbency for liquid ammonia-treated cotton were lower than that of NaOH-treated cotton because of a difference in swelling actions of the agents. It seems caused by intermicrofibrillar pores produced in swelling processes. The bending rigidity and bending hysteresis were decreased remarkly by liquid ammonia treatment. Therefore softness and dimensional stability were improved. The liquid amminia and NaOH/liquid ammonia-treated cottons moreover show excellent properties in tensile strength, anti-shrinkage for laundering, and wrinkle recovery.

• 한국환경과학회지
• /
• 제23권5호
• /
• pp.887-893
• /
• 2014

In order to remove fluoride ions from aqueous solution, PVC-$Al(OH)_3$ beads were prepared by immobilizing $Al(OH)_3$ with polyvinyl chloride (PVC). The prepared PVC-$Al(OH)_3$ bead was characterized by using SEM, EDS and Zeta potential. Dependences of pH, contact time and initial fluoride concentration on the adsorption of fluoride ions were studied. The optimal pH was in the range of 4~10. The adsorption was rapid during the initial 12 hr, and equilibrium was attained within 72 hr. The adsorption rate of fluoride ions by PVC-$Al(OH)_3$ beads obeyed the pseudo-second-order kinetic model. The maximum adsorption capacity obtained from Langmuir isotherm model was found to be 62.68 mg/g.

• 대한화학회지
• /
• 제30권3호
• /
• pp.296-300
• /
• 1986

MeOH-$H_2O$, EtOH-$H_2O$, MeOH-MeCN and MeOH-$(Me)_2$CO 혼합용매계에서 pseudo-saccharinechloride의 가용매분해반응에 대한 유사일차 반응속도상수를 여러 온도에서 구하였다. Kivinen식의 n값과 Grunwald-Winstein식의 m값을 구하고 분광용매화 관계식의 파라메타들을 결정하였다. 이들 용매효과 파라메타와 활성화 파라메타들을 종합하여 볼때 Pseudo saccharinechloride의 가용매 분해반응은 $S_N2$ 반응으로 진행됨을 알았다.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.231-238
• /
• 1984

Heavy metal fluoride glasses exhibit considerable promise as high transparency materials from the UV to the IR. These glasses are prepared by fusion of the mixture of metal fulorides($ZrF_4$, $BaF_2$, $LaF_3$ etc) at 800-1, 00$0^{\circ}C$ under the inert$(N_2)$ or reactive ($CCl_4$, $Cl_2$) atmosphere following the casting into glass on cooling. Infrared absorption at the 3, 400 cm-1 -OH peak has been measured as a function of thickness for several ZrF-$BaF_2$-LaF and $HfF_4$-$BaF_2$-$LaF_3$ glasses to separate contributions from bulk and surface -OH. For glasses melted under $CCl_4$ reactive atmosphere the peak is due almost entirely to surface-OH. and melting in a closed reactor was best for removing -OH. In ambient atmosphere the -OH peak exhibited no time dependence over a 30 d period indicating a very small rate of surface attack by atmospheric H2O. Removal of -OH absorption processing was generally easier and more complete for the $BaF_2$/ThF4-glasses than for the $ZrF_4$-or $HfF_4$-based glasses.