• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.34-40
• /
• 2014

Conjugate heat transfer of an automotive oil cooler with offset-strip fins was numerically investigated to predict the performance of the oil cooler for various flow-rates. The simulations were conducted by directly modeling offset-strip fins with unstructured meshes. The incompressible Navier-Stokes equations coupled with energy equation were used for the present simulations. Heat transfer characteristics of the oil cooler was compared well with experimental results and the errors were approximately within 5 percents. It was found that the performance of the oil cooler increased as the flow-rate increased up to the flow-rate of 12 L/min, but the performance seemed to be saturated beyond a critical flow-rate, which was estimated as 15 L/min. Furthermore, it was confirmed that compared to the performance without fins, that of the oil cooler with offset-strip fins was increased by about 75 percents.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1098-1102
• /
• 2008

To increase the ink transfer rate in the micro-gravure-offset printing, the liquid transfer process between two separating plates is investigated. During the liquid transfer process, in which one plate is fixed and the other one moves vertically, a sessile droplet is separated into two droplets. The volume ratio of the two droplets depends on the contact angles of the two plates. In a numerical study of the ink transfer processes, liquid transfer between two parallel separating plates and between a trapezoidal cavity and an upward moving plate are simulated, as models of the printing of ink from the offset pad onto the substrate and the picking up of ink from the gravure plate by the offset pad, respectively. Also, in experimental study, to obtain various surface contact angles, chemical treatment, plasma treatment, and electrowetting- on-dielectric (EWOD) surface are considered. The transfer rate between two plates is calculated by analyzing the droplet images. From the results, the optimal surface contact angles of the units of the micro-gravure-offset printing can be characterized.

• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.242-254
• /
• 2000

This paper describes an efficient solid modeling method for thin-walled plastic or sheet metal parts, based on the non-manifold offsetting operations. Since the previous methods for modeling and converting a sheet into a solid have adopted the boundary representations for solid object as their topological framework, it is difficult to represent the exact adjacency relationship between topological entities of a sheet model and a mixture of wireframe and sheet models that can appear in the meantime of modeling procedure, and it is hard to implement topological operations for sheet modeling and transformation of a sheet into a solid. To solve these problems, we introduce a non-manifold B-rep and propose a sheet conversion method based on a non-manifold offset algorithm. Because the non-manifold offset aigorithm based on mathematical definitions results in an offset solid with tubular and spherical thickness-faces we modify it to generate the ruled or planar thickness-faces that are mostly shown in actual plastic or sheet metal parts. In addition, in order to accelerate the Boolean operations used the offset algorithm, we also develope an efficient face-face intersection algorithm using topological adjacency information.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.381-386
• /
• 1997

The offsetting method using geometric properties of B-spline control polygon is more faster than using of general normal vector in offset processing. But this method itself does not solve the prob¬lems of loop removal in normal offsetting. Generally the distance between neighborhood spans of B-spline control polygon is greater than the offset distance, the loops are occurred in offsetting. For generating of the more precision tool-path in NC machining, the loops of offset must be removed. In this paper, two methods for loop removal are introduced in offsetting of B-spline curve. One is using the intersection of B-spline control span which being occurred of the loop. The other is using two B-spline curve divisions divided from original B-spline curve or its offset curve. After the inter¬section point of loop was searched, the loop being removed to cusp. Also the method for filleting of cusp is inspected to more precision cutting. It is shown that the offsetting using B-spline control polygon is more effective in the sculptured surface machining.

• 한국통신학회논문지
• /
• 제36권9C호
• /
• pp.589-595
• /
• 2011

본 논문에서는 다중경로 페이딩 (multipath fading) 채널 환경에서 직교 주파수 분할 다중 (orthogonal frequency division multiplexing: OFDM) 시스템을 위한 개선된 다중단계 (mu1ti-stage) 타이밍 옵셋 (timing offset) 추정기법을 제안한다. 제안한 기법은 기존의 다중단계 타이밍 옵셋 추정기법이 랜덤한 다중경로 채널 성분에 민감하다는 점을 개선하기 위해 상호 상관함수 샘플 표준편차를 이용한다. 모의실험 결과를 통해 제안한 기법이 기존 기법에 비해 우수한 정추정확률과 (correct estimation probability) 평균제곱오차 (mean square error: MSE) 성능을 가짐을 보인다.

• 대한기계학회논문집B
• /
• 제34권5호
• /
• pp.531-537
• /
• 2010

본 연구에서는 옵셋 스트립 휜 열교환기에서 휜 형상에 대한 최적화를 수행하였다. 압력강하량은 감소시키고 열전달량을 증가시키기 위해 이 둘을 동시에 나타낼 수 있는 j/f, $j/f^{1/3}$, JF 등의 성능 인자가 고려되었다. STDQAO, PQRSM, MGA 등의 최적화 기법이 사용되었으며, MGA 를 통해 기존 옵셋 스트립 휜보다 JF 인자는 36%, 열전달 성능은 280% 향상된 최적화된 휜 형상을 제안하였다.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1057-1063
• /
• 2012

A cycloid speed reducer is a type of the speed reducers. The cycloid speed reducer has a eccentric rotating motion and offset to avoid some problem of assembly, so it has a disadvantage for vibration. In this paper, a multi-body dynamic model is developed for a cycloid speed reducer and the dynamic behaviors of the reducer are investigated. The cycloid speed reducer consists of cycloidal plate gears, housing gear, input shaft, output pin and shaft, and eccentric bearings. Using a CAD program, each component of cycloid reducer is modeled based on the offset and multi-body simulations are performed using Recurdyn. As a result, the pin reaction force and the amplitude of bearing displacement are increased by the offset.

• 한국통신학회논문지
• /
• 제37A권10호
• /
• pp.809-814
• /
• 2012

본 논문은 멀티레벨을 가지는 홀로그래픽 저장 장치에서 EM (Expectation-maximization) 알고리즘을 이용한 적응 문턱전압검출기를 제안한다. 멀티레벨을 이용한 홀로그래픽 저장 장치의 경우 DC 오프셋의 정도에 따라 비적응 문턱전압검출기의 성능에 매우 심각한 영향을 미친다. EM 방법은 채널을 통과한 데이터를 이용해 Expectation step과 maximization step을 반복하면서 평균과 분산을 추정하는 방법이다. DC 오프셋이 있는 상황에서 제안된 방법을 적용하여 문턱값을 찾아내서 검출한 결과 일정한 한도 내의 DC 오프셋의 경우는 DC 오프셋이 없는 경우와 동일한 성능을 보였다.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.11-16
• /
• 2020

In this paper, system that includes multiple unmanned aerial vehicles (UAVs) are considered. The vehicles are equipped with a mission computer for a specific mission and equipment. The mission equipment operates based on the time of mission computer. Also, data collected by flight computer and mission computer is saved with the time of each operating system. Generally, time offset between multiple computers always exists, though the computers are connected to the Internet. When the data collected by multiple computers is combined, the time offset causes damage on reliability of the combined data. Computers that connected to the Internet are synchronized by network time protocol (NTP). This paper proposes a system that the time of multiple mission computers are synchronized by the same NTP server to minimize the time offset. In the results of the measurement, the system time offset of multiple mission computer is maintained within 10ms from the system time of the server computer.

• 한국전자파학회논문지
• /
• 제23권11호
• /
• pp.1280-1287
• /
• 2012

3.2~6.5 GHz 광대역 특성을 갖는 YTO(YIG Tuned Oscillator) 모듈을 설계 및 제작하였다. 위상 잡음 특성을 개선하기 위해 샘플링 믹서를 이용한 offset PLL(Phase Locked Loop) 구조로 설계하였다. 이 방식은 샘플링 믹서, 위상 비교기, 루프 필터, 전류 드라이버 회로, YTO로 구성된다. 측정 결과, 4.5 GHz에서 위상 잡음은 수식으로 도출한 값과 유사한 10 kHz offset 주파수에서 -100 dBc/Hz를 얻었다. 제작된 YTO 모듈의 위상 잡음은 동작 주파수 대역에서 기존 PLL 구조에 비해 10 dB 이상 우수함을 확인하였다.