• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1182-1185
• /
• 2009

본 논문에서는 해상무선통신시스템(Maritime Wireless Communication System)을 이용하여 Simulator를 구현하는 방식에 관해서 연구 하였다. VHF, CDMA, WiBro와 같이 3가지 무선통신 방식들에 대해서 해상무선통신에 적용가능한지를 분석하고, Matlab의 GUI를 사용하여 구현된 해상무선통신방식 시뮬레이터를 바탕으로 해상무선통신 채널환경에서 무선통신방신에 대한 성능을 검증하는 시뮬레이션 프레임워크를 제시하였다. 현재까지 기본적으로 CDMA방식으로 무선통신방식 시뮬레이터를 구축하고, 추후 OFDM기반의 WiBro 전송방식에 대해서도 추가로 시뮬레이터를 설계하여 성능을 검증해 보겠다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.532-538
• /
• 2003

In this paper we have investigated a novel approach applying low-density parity-check coding to a COFDM-CDMA system, which operates in a multi-path fading mobile channel. Developed as a linear-block channel coder, the LDPC code is known for a superior signal reception capability in AWGN and/or flat fading channels with respect to increased encoding rates, however, its performance degrades when the communication channel becomes multi-path fading. For a typical multi-path fading mobile channel with a SNR of 16㏈ or lower. in order to obtain a BER lower than 1 out of 10000, the LDPC code with encoding rates below 1:3 requires not only the inherent parity check information but also the piloting information for refreshing front-end equalizer taps of COFDM-CDMA, periodically. For instance, while the 1:3-rate LDPC coded transmission symbol is consisted of data bits and parity-check bits in 1 to 3 proportion, on the other hand, in the proposed method the same rate LDPC transmission symbol contains data bits, parity check bits, and pilot bits in 1 to 2 to 1 proportion, respectively. The included pilot bits are effective not only for channel estimation and channel equalization but for symbol decoding by assisting the parity-check bits, hence, improving SNR vs BER performance over the conventional 1:3-rate LDPC code. The proposed system performance has been verified using computer simulations in multi-path, Rayleigh fading channels, and the results show us that the proposed method out-performs the general LDPC channel coding methods in terms of SNR vs BER measurements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1171-1178
• /
• 2005

Multi-code code division multiple access(MC-CDMA) has been proposed for providing the various service rates with different quality of service requirement by assigning multiple codes and increasing the capacity. However, it suffers from the serious problem of high peak to average power ratio(PAPR). So, it requires large input back-off, which causes poor power consumption in high power amplifier(HPA). In this paper, we propose a new method that can reduce PAPR efficiently by constraint codes based on the opposite correlation to the incoming information data in MC-CDMA. PAPR reduction depends on the length and indices of constraint codes in MC-CDMA system. There is a trade-off between PAPR reduction and the length of constraint codes. From the simulation results, we also investigate the BER improvement in AWGN channel with HPA. The simulation results show that BER performance can be similar with linear amplifier in two cases: 1) Using exact constraint codes without input back-off and 2) a few constraint codes with small input back-off.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1209-1216
• /
• 2008

In order to maximize spectrum efficiency and data rate MIMO(Multiple Input Multiple Output) is adopted to wireless system. OFDM-based WiMAX and LTE accommodate MIMO as mandatory technology. STC(Space Time Coding) and SM(Spatial Multiplexing) are used in downlink while in uplink C-MIMO(Collaborative MIMO) is used to improve data throughput. In this paper conventional pairing schemes, RPS(Random Pairing Scheduling) and DPS(Determinant Pairing Scheduling) are analyzed. From the analysis the performance of DPS algorithm is better than that of RPS because DPS measures orthogonal factor between paired users. However, there are potential problems such as hardware complexity and performance. To overcome the issues Power-Based Scheduling(PBS) algorithm is proposed for C-MIMO. PBS can provide higher performance compared to RPS and dramatically reduce hardware complexity compared to DPS

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1075-1083
• /
• 2013

This paper describes an ultra-wideband (UWB) antenna that uses a ring resonator concept. The proposed antenna can operate in the entire UWB, and the IEEE 802.11a frequency band can be rejected by inserting a notch stub into the ring resonator. The experiment results indicate that the measured impedance bandwidth of the proposed antenna is 17.5 GHz (2.5 GHz to at least 20 GHz). The proposed UWB antenna has omnidirectional radiation patterns with a gain variation of 3 dBi (1 dBi to 4 dBi).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.156-161
• /
• 2007

In a TDD system, the length of slots can be unequal, and the number of downlink (DL) and uplink (UL) slots per frame can be different as well. The advantage of using TDD is the capability to accommodate asymmetric high-bit-rate services for the DL and It, which will be one of the prominent features in 4G systems. This paper analyzes the performance of TDD system on mobile channel environments like indoor pedestrian and vehicular channel, and proposes optimum modulation/demodulation method in TDD system. A rectangular QAM (RQAM) used in various communication systems has good BER performance but the much more signal amplitudes also have become one of the barriers to implement receiver. While PSK receiver is implemented easily because it has a constant amplitude, but it's BER performance is worse than RQAM. APSK proposed in this paper integrates merits of RQAM and PSK, and minimizes demerits of then And a simple method is also proposed to demodulate the soft symbol. The results indicate that the proposed APSK has a little worse performance than RQAM but the dynamic range of APSK is about 4 dB, 8 dB better than RQAM at 16-ary, 64-ary modulation/demodulation respectively.