• 제목/요약/키워드: O4O

검색결과 32,212건 처리시간 0.073초

한우 암소의 개체별 성장곡선 모수 추정 (Estimation of Parameters for Individual Growth Curves of Cows in Bostaurus Coreanae)

  • 이창우;최재관;전기준;나기준;이채영;황정미;김병완;김종복
    • Journal of Animal Science and Technology
    • /
    • 제45권5호
    • /
    • pp.689-694
    • /
    • 2003
  • 출산기술연구소 대관령지소에서 출생한 한우 암소로부터 시간적인 간격을 두고 조사된 체중측정 기록에 대해 비선형의 성장곡선 모형을 적용하여 한우 암소의 개체별 성장곡선 모수를 추정하고 개체별로 추정된 모수를 이용하여 한우 암소의 정확한 성장형태를 추정하기 위해 실시하였다. Gompertz 모형으로 추정한 개체별 성장 곡선 모수 A, b 및 k의 평균치는 각각 383.42${\pm}$97.29kg, 2.374${\pm}$0.340 및 0.0037${\pm}$0.0012였으며, 개체별 변곡점의 평균은 255.63${\pm}$109.09일, 변곡점에서 체중의 평균은 141.05${\pm}$35.79kg, 변곡점에서의 일당증체량의 평균은 0.500${\pm}$0.123 kg이었고, 성장곡선 모수 A, b 및 k의 변이계수는 각각 25.3, 14.3 및 32.4%이었다. von Bertalanffy 모형으로 추정한 개체별 성장곡선 모수 A, b 및 k의 평균치는 각각 410.47${\pm}$117.98kg, 0.575${\pm}$0.057 및 0.003${\pm}$0.001이었고, 개체별 변곡점의 평균은 211.02${\pm}$105.53일, 변곡점에서 체중의 평균은 121.62${\pm}$34.94kg, 최대 증체율의 평균은 0.504${\pm}$0.124kg이었으며, 성장곡선 모수 A, b 및 k의 변이계수는 각각 28.7, 9.9 및 33.3%로 추정되었다. Logistic 모형으로 추정한 개체별 성장곡선 모수 A, b 및 k의 평균치는 각각 347.64${\pm}$97.29kg, 6.73${\pm}$0.34 및 0.006${\pm}$0.0018이었고, 개체별 변곡점의 평균은 324.47${\pm}$3.87일, 변곡점에서 체중의 평균은 173.82${\pm}$1.13kg, 최대 증체율의 평균은 0.508${\pm}$0.003kg이었으며, 성장곡선 모수 A, b 및 k의 변이계수는 각각 27.9, 5.0 및 30.0%이었다. Gompertz 모형, von Bertalanffy 모형 및 Logistic 모형에 의해 추정된 생시체중의 평균치들은 각각 36.40${\pm}$0.33, 31.59${\pm}$0.34 및 49.09${\pm}$0.88kg으로 추정되어 실제체중 23.73${\pm}$0.10kg 보다 컸으며 36개월 체중의 경우 세 모형이 각각 349.73${\pm}$2.01, 356.41${\pm}$2.07 및 336.18${\pm}$1.91kg으로 실제체중 363.67${\pm}$2.08kg보다 작았다. 그러나 세 모형으로 추정된 변곡점이 한우 암소의 실질적인 변곡점인지에 대해서는 좀더 검토가 필요한 부분인데, 최(2001)는 한우 암소의 경우 3개월령에서 4개월령 사이의 일당증체량이 0.590으로서 이 시기에 최대의 성장이 이루어지며 3개월령 체중과 4개월령 체중은 각각 79.31 및 98.91kg이라고 보고하고 있으며, 본 연구에서 Table 4에 제시된 결과를 봐도 3개월령과 6개월령 사이 90일 동안에 50.89kg의 증체가 이루어져 일당증체량으로 환산하면 약 0.56kg이 되어 다른 어느 시기보다도 가장 증체속도가 빠른 시기인 것으로 나타났다. 변곡점이 일당증체량이 최대인 시점으로 해석한다면 각 모형에서 고정되어 있는 변곡점의 위치들인 성숙체중의 38.6%(Gompertz 모형), 29.6% (von Bertalanffy 모형) 및 50%(Logistic 모형)는 한우 암소의 실질적인 변곡점보다 늦는 것으로 판단할 수 있는데, 실제로 세 모형 중 변곡점의 위치가 제일 빠른 von Bertalanffy 모형의 적합도가 제일 좋은 것도 이러한 이유 때문일 수 있다. 따라서 한우 암소의 정확한 성장특성을 파악하기 위해서는 변곡점의 위치가 고정되어 있지 않은 기존의 모형들을 이용하는 방안과 아울러 본 연구에 이용된 모형들을 변형시켜 활용하는 방안에 대한 연구가 필요한 것으로 판단된다.

금강 하류역에서 수질의 시공간적 변화특성 (Characteristics of Spatio-temporal Variation of the Water Quality in the Lower Keum River)

  • 양한섭;김성수
    • 한국수산과학회지
    • /
    • 제23권3호
    • /
    • pp.225-237
    • /
    • 1990
  • 금강본류역의 20개 지점에서 1988년 5월부터 4개월 동안 매월 1회씩 화학성분들을 측정하고, 4월에는 지점 2와 지점 9에서 25시간 동안 연속관측을 실시하여 금강 하류수역의 수질특성과 그 변동요인에 대해 연구하였다. 하구둑 상류 300 m(지점 2)에서 4월에 측정한 표 $\cdot$저층수 중 염분의 시간변화는 군산항 조석주기와 거의 일치하였고 규산염, 용존무기태질소 및 질산염의 시간변화는 염분분포와 거의 대칭적이었다. 염분과의 관계로부터 규산염과 질산염의 대부분은 보존적인 거동을 하며 해수의 유입은 하천수중 이 두 성분의 농도를 희석시킨다. 반면에 인산염은 염분농도와 관계없이 비교적 낮은 농도로 시간별 변화폭도 크지 않다. 이는 대부분의 용존 인산염이 무기침전물이나 현탁물질에 의해 흡착제거되고, 또한 흡$\cdot$탈착 과정에 의해 인산염이 완충되어 있기 때문이라 추측된다. 한편 탁도는 최저염분을 나타내는 시간부터 약 4시간 동안 비교적 높았고, pH는 염분의 시간변화 모양과 유사하나 시간별 pH의 변화는 매우 완만하다. 그러나 COD와 용존산소포화도는 일반 내만역에서의 시간변화 모양과 유사한 것이 특징적이다. 즉 비슷한 염분범위에서 광합성능이 큰 10시 이후 주간에 측정한 COD값이 야간 보다 높으며, 호흡작용이 활발한 야간에는 염분농도가 낮을수록 COD는 낮아지고 AOU값은 커진다. 성분별로 다소의 차이는 있으나 표$\cdot$저층수간 농도차가 매우 작으며, 규산염, 용존무기태질소 및 질산염은 표층이 다소 높고, 그 외의 성분들은 저층이 약간 높다. 하구둑 상류 약 35 km의 강경(지점 9)에서는 염분이 한번도 검출되지 않았으나 수위의 시간변화 폭은 약 2.5 m였다. 그러나 대부분의 화학성분들은 수위의 변화만큼 시간별 농도차가 크지 않고 지점 2에서 보다 매우 완만한 농도변화를 보였다. 규산염, 용존무기태질소, 암모니아의 농도는 지점 2에 비해 월등히 높은 반면 pH 및 인산염은 다소 낮고 그 외의 성분들은 지점 9가 약간 높다. 지점별로 보면 해수의 영향을 가장 많이 받는 지점 1과 2, 그리고 하구둑으로부터 상류 $40\~55km$의 지점들에서 pH값이 비교적 높으나 그 외의 수역에서는 지점별 차이도 적고 pH값도 낮다. COD 및 용존산소포화도 역시 pH값이 높은 지점들에서 가장 높았으나, 그 수역을 중심으로 상류 및 하류로 갈수록 점차 감소하였다. 이와같이 지점 11과 지점 15 사이에서 이들 세 성분이 높은 것은 식물의 광합성작용에 의한 것이라고 사료된다. 현탁물질은 하구역 특히 하구둑으로부터 300 m에서 약 20 km 까지의 지점들(지점 2에서 지점 6)에서 매우 높은 값을 보이며 이는 조석작용으로 해수와 담수가 강제혼합되면서 표층퇴적물이 재부유하기 때문이라고 판단된다. 영양염류는 월별로 다소의 차이는 있으나, 대체적으로 지점 1과 2에서 가장 낮고, 상류로 갈수록 점차 증가하며 지점 7 상류역이 하류역에 비해 높은 농도이다. 월별로는 7월에 규산염, 용존무기태질소 및 암모니아의 농도가 가장 높은 반면에 용존산소포화도는 가장 낮다. 그러나 지점 14 상류역에서는 5월에 측정한 용존무기태질소, 암모니아, 인산염 및 COD 값이 7월보다 다소 높거나 비슷하다. 한편 영양염류와 COD값은 대체적으로 8월에 가장 낮으나 용존산소포화도는 가장 높다.

  • PDF

보건소내(保健所內) 한방의료(漢方醫療)에 대(對)한 임상통계연구(臨床統計硏究) (전주시(全州市) 완산구(完山區) 보건소(保健所) 중심으로) (A Study on the Clinical Statistics of Oriental Medicine Service in the Health Center)

  • 송범용;육태한
    • 대한한의학회지
    • /
    • 제18권1호
    • /
    • pp.40-57
    • /
    • 1997
  • 연구배경(硏究背景) 및 목적(目的) 최근(最近) 한방공중보건사업(韓方公衆保健事業)에 대(對)한 연구(硏究)와 제도개선(制度改善)이 이루어지면서, 한방의료시혜(韓方醫療施惠)를 통(通)해 국민(國民)들의 보건지도(保健指導) 및 건강증진(健康增進) 향상(向上)에 많은 영향(影響)을 끼칠 것으로 보인다. 1995년(年)부터 1년여(年餘)에 걸쳐 한방병원(韓方病院)과 보건소(保健所)가 함께 보건소내(保健所內) 한방의료(韓方醫療)를 실시(實施)하면서 주민(住民)들로부터 많은 호응(呼應)을 받았다. 이에 보건소(保健所)에 내원(來院)하여 한방진료(韓方診療)를 받은 환자(患者)들의 일반적(一般的)인 특징(特徵)과 질환(疾患)의 특성(特性) 및 치료효과(治療效果) 등(等)에 대(對)하여 조사(調査)하였다. 대상(對象) 및 방법(方法) 1996년(年) 1월(月) 4일(日)부터 1996년(年) 12월(月) 26일(日)까지 1년간(年間) 전라북도(全羅北道) 전주시(全州市) 완산구(完山區) 보건소(保健所)에서 주(週) 1회(回) 또는 3회(回)에 걸쳐 총(總) 60회(回)동안 실시(實施)한 한방진료(韓方診療)를 받은 환자(患者) 234명(名)의 질환(疾患) 234건(件)을 대상(對象)으로 통계연구(統計硏究)하였다. 결과(結果) 및 결론(結論) 1. 환자(患者)의 남녀비율(男女比率)은 1 : 6.8로 여성(女性)이 월등(越等)히 많았다. 2. 환자중(患者中) 51세이상(歲以上)이 88.89%로 고령환자(高齡患者)가 대부분(大部分)을 차지했다. 3. 총질환(總疾患) 238건중(件中) 근골격계(筋骨格系) 및 결합조직질환(結合組織疾患)이 82.77%로 대부분(大部分)을 차지했다. 4. 병력기간(病歷期間)은 1년(年)에서 5년(年)사이가 32.35%로 가장 높아 관련질환(關聯疾患)이 만성화(慢性化)상태임을 알려준다. 5. 초진시(初診時) 증상(症狀)은 심(甚)한 자각증상(自覺症狀)을 갖고 생활(生活)에 많은 지장을 초래(招來)하는 경우(境遇)(Grade III)가 55.88%로 가장 많았다. 6. 양호이상(良好以上)의 치료효과(治療效果)를 보인 경우(境遇)는 62.18%였고, 저효이상(抵效以上)의 효과(效果)는 78.99%로 나타났다. 7. 치료기간(治療期間)을 2회(回)에서 5회(回) 내원(來院)하여 치료(治療)받은 경우(境遇)가 34.03%로 가장 높았고, 1회(回)만 내원(來院)한 경우(境遇)에 비(比)하여 2회(回)에서 10회(回) 내원(來院)하여 치료(治療)받은 환자(患者)들이 4배정도(倍定度)의 높은 치료율(治療率)을 보였다. 8. 처방(處方)은 오적산(五積散), 팔미환(八味丸), 향사평위산(香砂平胃散), 소경활혈탕(疎經活血湯), 육미지황탕(六味地黃湯) 등(等)의 순(順)으로 많이 사용(使用)되었다. 9. 침(針)은 1일평균(日平均) 22.58명(名)을 시술(施術)하였고, 구(灸)(뜸)는 1일평균(日平均) 0.58명(名)을, 사혈(瀉血)은 1일평균(日平均) 2.28명(名)을 시술(施術)하였다. 10. 한양방향시치료시(韓洋方同時治療時) 양호이상(良好以上)의 효과(效果)를 보인 경우(境遇)가 30건중(件中) 21건(件)으로 70%의 치료효과(治療效果)를 보여 한방단일진료시(韓方單一診療時)보다 다소 높은 치료효과(治療效果)를 나타냈다. 11. 1일평균(日平均) 한방진료건수(韓方診療件數)는 26.95명(名)이었고, 1일평균(日平均) 한방초진환자수(韓方初診患者數)는 3.9명(名)으로 나타났으며, 한방진료(韓方診療)가 양한방(洋韓方) 총진료(總診療)의 23.20%를 차지했고, 1일(日) 평균(平均) 한양방(韓洋方) 총진료건수(總診療件數)에 대(對)해 1일(日) 평균(平均) 한방초진건수(韓方初診件數)가 21.51%를 차지하는 것으로 나타났다.

  • PDF

한국인 결핵환자에서 Isoniazid와 Rifampicin의 약동학 (Pharmacokinetic Profiles of Isoniazid and Rifampicin in Korean Tuberculosis Patients)

  • 안석진;박상준;강경우;서지영;정만표;김호중;권오정;이종헌;차희수;김명민;최경업
    • Tuberculosis and Respiratory Diseases
    • /
    • 제47권4호
    • /
    • pp.442-450
    • /
    • 1999
  • 연구배경 : 한국인 결핵환자에서 의사나 병원마다 다양하게 처방되는 isoniazid(INH)와 rifampicin(RFP)의 일일용량은 외국에서 추천하는 용량과 다른 실정이라, 4제 병용요법을 시행받는 결핵환자에서 INH와 RFP의 약물동력학을 알아보고 이를 토대로 결핵환자에서 INH, RFP의 적정 일일용량을 평가하고자 본 연구를 시행하였다. 대상 및 방법 : 1997년 12월부터 1998년 7월까지 삼성서울병원에 입원하여 활동성 결핵으로 확진된 환자를 대상으로 INH 300mg, RFP 450mg, EMB 800mg, PZA 1500mg을 아침 식전 30분에 복용하고 0, 0.5, 1, 1.5, 2, 4, 6, 8, 12시간째에 채혈을 시행하여 혈청에서 INH, RFP의 농도를 측정하였고 소변은 12시간동안 4시간 간격으로 모아서 양을 기록하고 농도를 측정하였다. INH, RFP의 농도측정은 high-performance liquid chromatography(HPLC)를 이용하였다. 결 과 : 대상환자는 INH 15명, RFP 17명이었고 연령의 중앙값은 33세(24~57), 평균 체중은 $58.3{\pm}13kg$(41.9~84.5)이었으며 남녀비는 9 : 8이었다. 1) INH 결과 INH의 $7.63{\pm}3.20{\mu}g/ml$, $0.73{\pm}0.22hr$, 혈중반감기는 $2.12{\pm}0.84hr$, Ke값은 $0.83{\pm}0.15hrs^{-1}$이었으며 AUC는 $21.87{\pm}13.37{\mu}g^*hr/ml$, Xu는 $56.22{\pm}31.46{\mu}g$/24hrs 였다. CLtot은 $17.54{\pm}8.89L/hr$, CLnr은 $14.74{\pm}8.35L/hr$, CLr은 $2.79{\pm}1.31L/hr$로서 대부분이 간으로 대사되었다. 2) RFP 결과 RFP의 Cmax는 $8.93{\pm}3.98{\mu}g/ml$, Tmax는 $1.76{\pm}1.13hr$, 혈중반감기는 $2.27{\pm}0.54hr$였고 Ke값은 $0.32{\pm}0.08hrs^{-1}$이었으며 AUC는 $36.52{\pm}14.19{\mu}g^*hr/ml$, Xu는 $31.18{\pm}13.69{\mu}g$/24hrs 였다. CLtot는 $14.63{\pm}6.60L/hr$였고 CLr 이 $1.04{\pm}0.55L/hr$, CLnr이 $13.59{\pm}6.21L/hr$로서 대부분이 간으로 대사되었다. 3) 환자 체중과 최고혈중농도의 상관관계는 INH의 경우 r=-0.514, p-value>0.05이었고, RFP의 경우 r=-0.662, p-value<0.01이었다. 결 론 : INH, RFP, EMB, PZA 병용요법으로 치료받는 결핵환자에서 RFP은 체중에 따른 용량 조절이 필요하며, INH는 하루 300mg 투여로도 이상적인 최고혈중농도에 도달하지만 한국인에서 INH 하루 400mg보다 300mg이 적당할 지 여부는 향후 임상연구가 필요하리라 사료된다.

  • PDF

토양내(土壤內) 식물(植物) 병원균(病原菌)의 발병억제(發病抑制) 및 유발성질(誘發性質) (Nature of Suppressiveness and Conduciveness of Some plant pathogens in Soils)

  • 심재욱;이민웅
    • 한국균학회지
    • /
    • 제18권3호
    • /
    • pp.164-177
    • /
    • 1990
  • 인삼(人蔘)(Panax ginseng C. A. Meyer)의 증산을 제한하는데 가장 큰 요인(要因)은 연작장해이므로 인삼(人蔘)의 증산에 기여할 수 있는 기초자료를 얻기위해 조사(調査)를 실시하였다. 1. 토양(土壤) pH가 F. solani 및 C. destructans의 포자발아(胞子發芽) 그리고 R. solani의 균사생장(菌絲生長)에 미치는 상관관계(相關關係)는 각각 r=0.2645, r=0.315, r=0.19로서 정(正)의 상관(相關)을 나타내었다. 2. 병원균(病原菌)의 포자발아(胞子發芽)와 토양미생물(土壤微生物) 분포수(分布數)와의 관계(關係)를 분석(分析)한 결과(結果), F. solani와 전세균(全細菌), 방선균(放線菌), 섬유소분해(纖維素分解) 세균(細菌)의 분포수(分布數)와의 관계(關係)에서 각각 r=0.21, r=0.37, r=0.20의 정(正)의 상관(相關)을 나타내었으나 전진균(全眞菌)과의 관계(關係)에서는 r=-0.20으로서 부(負)의 상관관계(相關關係)였다. R. solani의 균사생장(菌絲生長)과 방선균(放線菌)의 분포수(分布數)사이에는 정(正)의 상관(相關)(r=0.24)이 있었다. 3. 총 146개 토양(土壤)중에서 F. solani는 40개 토양(土壤)에서, C. destructans는 20개 토양(土壤)에서, R. solani는 9개 토양(土壤)에서 각각 병원균(病原菌) 억제토양(抑制土壤)으로 선발(選拔)되었다. 4. 병원균(病原菌) 억제토양(抑制土壤)의 K, Ca, Mg, Na의 평균함양(平均含量)은 유발토양(誘發土壤)의 것보다 적었으며 병원균(病原菌) 억제토양(抑制土壤)의 유기물함양(有機物含量)은 유발토양(誘發土壤)보다 2배이상 높았다. $P_2O_5$의 함양(含量)은 F. solani와 R. solani의 억제토양(抑制土壤)이 유발토양(誘發土壤)보다 낮은 반면, C. destructans의 억제토양(抑制土壤)은 유발토양(誘發土壤)보다 약간 높았다. 토양(土壤) pH에 있어서 억제토양(抑制土壤)의 평균(平均) pH는 유발토양(誘發土壤)보다 낮은 수치였다. 토양(土壤)의 물리적(物理的) 특성(特性)에 있어서 모래의 평균함양(平均含量)은 병원균(病原菌) 억제토양(抑制土壤)이 유발토양(誘發土壤)보다 2배 정도가 높은 반면, 미사(微砂)와 점사(粘士)의 함양(含量)은 유발토양(誘發土壤)보다 낮았다. 5. 병원균(病原菌) 억제토양(抑制土壤)과 유발토양(誘發土壤)의 미생물분포(微生物分布)는 F. solani 억제토양(抑制土壤)에 있어서 전세균(全細菌), 전진균(全眞菌), 섬유소분해(纖維素分解) 진균(眞菌)의 분포수(分布數)가 유발토양(誘發土壤)보다 높았던 반면, 방선균(放線菌), 섬유소분해(纖維素分解) 세균(細菌)의 분포수(分布數)는 유발토양(誘發土壤)보다 낮았으며, 전세균(全細菌) 및 전진균(全眞菌)의 분포수(分布數)는 병원균(病原菌) 억제토양(抑制土壤)과 유발토양(誘發土壤) 사이에 각각 유의성(有意性)(P=0.05)이 있었고, 방선균(放線菌)은 고도(高度)의 유의성(有意性)(P=0.01)이 두 토양(土壤) 사이에서 인정되었다. C. destructans의 억제토양(抑制土壤)에 있어서 전세균(全細菌), 전진균(全眞菌), 방선균(放線菌), 섬유소분해(纖維素分解) 진균(眞菌)의 분포수(分布數)는 유발토양(誘發土壤)의 분포수(分布數)보다 높았던 반면, 섬유소분해(纖維素分解) 세균(細菌)의 분포수(分布數)는 유발토양(誘發土壤)보다 2배 정도가 낮았다. R. solani의 억제토양(抑制土壤)에 있어서 전진균(全眞菌)의 분포수(分布數)가 유발토양(誘發土壤)의 분포수(分布數)보다 높았던 반면, 전세균(全細菌), 방선균(放線菌), 섬유소분해(纖維素分解) 세균(細菌), 섬유소분해(纖維素分解) 진균(眞菌)의 분포수(分布數)는 유발토양(誘發土壤)보다 낮았다. 6. 인삼근부병(人蔘根腐病) 발병(發病) 억제토양(抑制土壤)의 선발(選拔)은 공시(供試) 병원균(病原菌)별로 인삼(人蔘)이 식재(植栽)된 각각의 16개 토양(土壤)중 F. solani는 14개 토양(土壤)에서, C. destructans는 15개 토양(土壤)에서 각각 발병(發病) 억제성(抑制性)을 확인하였다. F. solani의 발병(發病) 억제토양(抑制土壤)에서 인삼(人蔘)의 근부률(根腐率)은 $1.0{\sim}17.4%$였으며, C. destructans의 발병(發病) 억제토양(抑制土壤)에서 인삼(人蔘)의 근부률(根腐率)은 $0.2{\sim}20.4%$였다.

  • PDF

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

만성폐쇄성폐질환 환자에서 Tiotropium 1일 1회, 1회 18㎍ 요법과 Ipratropium 1일 4회, 1회 40㎍ 요법의 치료효과 및 안전성 비교 (A Comparison of Tiotropium 18㎍, Once Daily and Ipratropium 40㎍, 4 Times Daily in a Double-Blind, Double-Dummy, Efficacy and Safety Study in Adults with Chronic Obstructive Pulmonary Disease)

  • 김승준;김명숙;이상학;김영균;문화식;박성학;이상엽;인광호;이창률;김영삼;김형중;안철민;김성규;김경록;차승익;정태훈;김미옥;박성수;최천웅;유지홍;강홍모;고원중;함형석;강은혜;권오정;이양덕;이흥범;이용철;이양근;신원혁;권성연;김우진;이철규;김영환;심영수;한성구;박혜경;김윤성;이민기;박순규;김미혜;리원연;용석중;신계철;최병휘;오연목;임채만;이상도;김우성;김동준;정성수;김주옥;고영춘
    • Tuberculosis and Respiratory Diseases
    • /
    • 제58권5호
    • /
    • pp.498-506
    • /
    • 2005
  • 연구배경 : 본 연구는 COPD환자를 대상으로 기관지확장제인 tiotropium 1일 1회, 1회 1캅셀 $18{\mu}g$과 ipratropium 1일 4회, 1회 2퍼프(퍼프당 $20{\mu}g$)의 유효성 및 안전성을 비교 평가하고자 하였다. 방 법 : 초기 선별방문 후, 환자는 2주간의 관찰기간에 들어갔으며, 이 기간을 마친 환자는 이중맹검, 무작위배정 하에 위약과 함께 1일 1회 tiotropium 또는 1일 4회 ipratropium을 투여 받았다. 유효성평가는 폐기능검사, 일중 PEFR측정, 환자평가 설문조사, 보조치료약물(살부타몰) 사용량으로 하였다. 폐기능검사는 치료시작 시(0일), 치료 14일후와 치료종료 시(28일)에 하였는데, 이때 투약 5분 전, 투약 후 30분, 60분, 120분 및 180분에 시행하였다. 결 과 : 16개 기관에서 134명의 환자가 분석되었다. 환자의 평균 (표준편차) 나이는 66 (7)세이었고 $FEV_1$은 예측치의 42 (12)%였다. 4주 치료 후 trough $FEV_1$ 반응은 ipratropium군에 비해 tiotropium군에서 유의하게 높았으며 PEFR경우에도 4주 동안 지속적으로 아침 흡입 전 측정한 PEFR이 tiotropium군에서 높게 나타났다(차이: 12.52-13.88 l/min). 4주 치료 기간동안 tiotropium은 좋은 내약성과 함께, ipratropium과 유사한 안전성을 나타냈다. 결 론 : 1일 1회 흡입용 항콜린제제인 tiotropium이 1일 4회 흡입용제제인 ipratropium에 비해 COPD환자를 치료하는데 더 우수한 기관지확장 반응을 보여주었고 안전성에서는 유사하였다.

지하수 관개에 의한 수도의 멸준양상과 그 방지책에 관한 연구 (Studies on the Rice Yield Decreased by Ground Water Irrigation and Its Preventive Methods)

  • 한욱동
    • 한국농공학회지
    • /
    • 제16권1호
    • /
    • pp.3225-3262
    • /
    • 1974
  • The purposes of this thesis are to clarify experimentally the variation of ground water temperature in tube wells during the irrigation period of paddy rice, and the effect of ground water irrigation on the growth, grain yield and yield components of the rice plant, and, furthermore, when and why the plant is most liable to be damaged by ground water, and also to find out the effective ground water irrigation methods. The results obtained in this experiment are as follows; 1. The temperature of ground water in tube wells varies according to the location, year, and the depth of the well. The average temperatures of ground water in a tubewells, 6.3m, 8.0m deep are $14.5^{\circ}C$ and $13.1^{\circ}C$, respercively, during the irrigation period of paddy rice (From the middle of June to the end of September). In the former the temperature rises continuously from $12.3^{\circ}C$ to 16.4$^{\circ}C$ and in the latter from $12.4^{\circ}C$ to $13.8^{\circ}C$ during the same period. These temperatures are approximately the same value as the estimated temperatures. The temperature difference between the ground water and the surface water is approximately $11^{\circ}C$. 2. The results obtained from the analysis of the water quality of the "Seoho" reservoir and that of water from the tube well show that the pH values of the ground water and the surface water are 6.35 and 6.00, respectively, and inorganic components such as N, PO4, Na, Cl, SiO2 and Ca are contained more in the ground water than in the surface water while K, SO4, Fe and Mg are contained less in the ground water. 3. The response of growth, yield and yield components of paddy rice to ground water irrigation are as follows; (l) Using ground water irrigation during the watered rice nursery period(seeding date: 30 April, 1970), the chracteristics of a young rice plant, such as plant height, number of leaves, and number of tillers are inferior to those of young rice plants irrigated with surface water during the same period. (2) In cases where ground water and surface water are supplied separately by the gravity flow method, it is found that ground water irrigation to the rice plant delays the stage at which there is a maximum increase in the number of tillers by 6 days. (3) At the tillering stage of rice plant just after transplanting, the effect of ground water irrigation on the increase in the number of tillers is better, compared with the method of supplying surface water throughout the whole irrigation period. Conversely, the number of tillers is decreased by ground water irrigation at the reproductive stage. Plant height is extremely restrained by ground water irrigation. (4) Heading date is clearly delayed by the ground water irrigation when it is practised during the growth stages or at the reproductive stage only. (5) The heading date of rice plants is slightly delayed by irrigation with the gravity flow method as compared with the standing water method. (6) The response of yield and of yield components of rice to ground water irrigation are as follows: \circled1 When ground water irrigation is practised during the growth stages and the reproductive stage, the culm length of the rice plant is reduced by 11 percent and 8 percent, respectively, when compared with the surface water irrigation used throughout all the growth stages. \circled2 Panicle length is found to be the longest on the test plot in which ground water irrigation is practised at the tillering stage. A similar tendency as that seen in the culm length is observed on other test plots. \circled3 The number of panicles is found to be the least on the plot in which ground water irrigation is practised by the gravity flow method throughout all the growth stages of the rice plant. No significant difference is found between the other plots. \circled4 The number of spikelets per panicle at the various stages of rice growth at which_ surface or ground water is supplied by gravity flow method are as follows; surface water at all growth stages‥‥‥‥‥ 98.5. Ground water at all growth stages‥‥‥‥‥‥62.2 Ground water at the tillering stage‥‥‥‥‥ 82.6. Ground water at the reproductive stage ‥‥‥‥‥ 74.1. \circled5 Ripening percentage is about 70 percent on the test plot in which ground water irrigation is practised during all the growth stages and at the tillering stage only. However, when ground water irrigation is practised, at the reproductive stage, the ripening percentage is reduced to 50 percent. This means that 20 percent reduction in the ripening percentage by using ground water irrigation at the reproductive stage. \circled6 The weight of 1,000 kernels is found to show a similar tendency as in the case of ripening percentage i. e. the ground water irrigation during all the growth stages and at the reproductive stage results in a decreased weight of the 1,000 kernels. \circled7 The yield of brown rice from the various treatments are as follows; Gravity flow; Surface water at all growth stages‥‥‥‥‥‥514kg/10a. Ground water at all growth stages‥‥‥‥‥‥428kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥430kg/10a. Standing water; Surface water at all growh stages‥‥‥‥‥‥556kg/10a. Ground water at all growth stages‥‥‥‥‥‥441kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥450kg/10a. The above figures show that ground water irrigation by the gravity flow and by the standing water method during all the growth stages resulted in an 18 percent and a 21 percent decrease in the yield of brown rice, respectively, when compared with surface water irrigation. Also ground water irrigation by gravity flow and by standing water resulted in respective decreases in yield of 16 percent and 19 percent, compared with the surface irrigation method. 4. Results obtained from the experiments on the improvement of ground water irrigation efficiency to paddy rice are as follows; (1) When the standing water irrigation with surface water is practised, the daily average water temperature in a paddy field is 25.2$^{\circ}C$, but, when the gravity flow method is practised with the same irrigation water, the daily average water temperature is 24.5$^{\circ}C$. This means that the former is 0.7$^{\circ}C$ higher than the latter. On the other hand, when ground water is used, the daily water temperatures in a paddy field are respectively 21.$0^{\circ}C$ and 19.3$^{\circ}C$ by practising standing water and the gravity flow method. It can be seen that the former is approximately 1.$0^{\circ}C$ higher than the latter. (2) When the non-water-logged cultivation is practised, the yield of brown rice is 516.3kg/10a, while the yield of brown rice from ground water irrigation plot throughout the whole irrigation period and surface water irrigation plot are 446.3kg/10a and 556.4kg/10a, respectivelely. This means that there is no significant difference in yields between surface water irrigation practice and non-water-logged cultivation, and also means that non-water-logged cultivation results in a 12.6 percent increase in yield compared with the yield from the ground water irrigation plot. (3) The black and white coloring on the inside surface of the water warming ponds has no substantial effect on the temperature of the water. The average daily water temperatures of the various water warming ponds, having different depths, are expressed as Y=aX+b, while the daily average water temperatures at various depths in a water warming pond are expressed as Y=a(b)x (where Y: the daily average water temperature, a,b: constants depending on the type of water warming pond, X; water depth). As the depth of water warning pond is increased, the diurnal difference of the highest and the lowest water temperature is decreased, and also, the time at which the highest water temperature occurs, is delayed. (4) The degree of warming by using a polyethylene tube, 100m in length and 10cm in diameter, is 4~9$^{\circ}C$. Heat exchange rate of a polyethylene tube is 1.5 times higher than that or a water warming channel. The following equation expresses the water warming mechanism of a polyethylene tube where distance from the tube inlet, time in day and several climatic factors are given: {{{{ theta omega (dwt)= { a}_{0 } (1-e- { x} over { PHI v })+ { 2} atop { SUM from { { n}=1} { { a}_{n } } over { SQRT { 1+ {( n omega PHI) }^{2 } } } } LEFT { sin(n omega t+ { b}_{n }+ { tan}^{-1 }n omega PHI )-e- { x} over { PHI v }sin(n omega LEFT ( t- { x} over {v } RIGHT ) + { b}_{n }+ { tan}^{-1 }n omega PHI ) RIGHT } +e- { x} over { PHI v } theta i}}}}{{{{ { theta }_{$\infty$ }(t)= { { alpha theta }_{a }+ { theta }_{ w'} +(S- { B}_{s } ) { U}_{w } } over { beta } , PHI = { { cpDU}_{ omega } } over {4 beta } }}}} where $\theta$$\omega$; discharged water temperature($^{\circ}C$) $\theta$a; air temperature ($^{\circ}C$) $\theta$$\omega$';ponded water temperature($^{\circ}C$) s ; net solar radiation(ly/min) t ; time(tadian) x; tube length(cm) D; diameter(cm) ao,an,bn;constants determined from $\theta$$\omega$(t) varitation. cp; heat capacity of water(cal/$^{\circ}C$ ㎥) U,Ua; overall heat transfer coefficient(cal/$^{\circ}C$ $\textrm{cm}^2$ min-1) $\omega$;1 velocity of water in a polyethylene tube(cm/min) Bs ; heat exchange rate between water and soil(ly/min)

  • PDF

광중합형 및 자가중합형 교정용 전색제의 치아우식예방 및 진행억제효과에 관한 실험적 연구 (The effects of fluoride releasing orthodontic sealants on the prevention and the progressive inhibition of enamel demiheralization in vitro)

  • 채승원;;윤영주;김광원
    • 대한치과교정학회지
    • /
    • 제27권6호
    • /
    • pp.979-995
    • /
    • 1997
  • 고정성 교정장치 주변에 발생되는 백색반점은 임상적으로 쉽게 눈에 띄는 문제점을 가지고 있으므로 잔치제거 후 심니적으로 만족스럽지 못한 결과를 야기하는데, 이는 곧 교정치료의 실패를 의미한다. 이미 많은 연구를 통해 고정성 교정장치가 구강내 세균환경을 변화시켜 세균집단의 증식을 용이하게 함으로써 고정성 장치 부착 후, 법랑질 탈회의 발생빈도가 증가된다는 사실이 보고 되어 왔으며 장기간이 소요되는 교정치료의 특성으로 인해 발생되는 브라켓 또는 교정용 밴드 주변의 법랑질 탈회나 치아우식증을 예방 또는 억제시키기 위한 연구가 함께 진행되어 왔다. 이는 환자에 대한 구강위생 교육이나 치아관리 노력에도 불구하고 발생될 수 있는데 이를 예방하기 위한 방법의 하나로 불소가 유리되는 교정용 전색제를 사용할 수 있다. 본 연구는 불소가 유리되는 광중합형 및 자가중합형 교정용 전색제의 치아우식 예방 및 진행억제효과를 규명하기 위해 다음과 같이 각각 7개의 편광현미경군(A군-G군)과 주사전자현미경군(A'군-G'군)으로 분류하였고 [1. A & A'군 STPP 인공우식용액에 담그지 않은 정상치아군, 2. B & B'군 : STPP 인공우식용액에 담그고 $37^{\circ}C$의 항온용기 에 72시간 보관한 비처치군,3. C & C'군 : STPP 인공우식용액에 담그고 $37^{\circ}C$ 의 항온용기에 72시간 보관한 자가중합형 교정용 전색제군, 4. D &D'군 : STPP 인공우식용액에 담그고 $37^{\circ}C$의 항온용기에 72시간 보관한 광중합형 교정용 전색제군, 5. E & E'군 표면에 아무처리 없이 STPP 인공우식용액에 담그고 $37^{\circ}C$의 항온용기에 72시간 보관한 후, 이를 다시 아무런 처치없이 STPP 인공우식용액에 담그고 $37^{\circ}C$의 항온용기에 72시간 보관한 비처치군, 6. F & F'군 : 표면에 아무런 처치없이 STPP 인공우식용액에 담그고 $37^{\circ}C$의 항온용기에 72시간 보관한 후, 자가중합형 교정용 전색제를 도포하고 이를 다시 STPP 인공우식용액에 담그고 $37^{\circ}C$의 항온용기에 72시간 보관한 자가중합형 교정용 전색제, 7. G & G'군 :표면에 아무런 처치없이 STPP 인공우식용액에 담그고 $37^{\circ}C$ 의 항온용기에 72시간 보관한 후, 광중합형 교정용 전색제를 도포하고 이를 다시 STPP 인공우식용액에 담그고 $37^{\circ}C$ 의 항온용기에 72시간 보관한 광중합형 교정용 전색제군], 이들을 편광현미경과 주사전자현미경을 이용해 조직의 변성 여부를 검색하여 다음과 같은 결과를 얻었다. 1. 편광현미경적 연구에서 인공우식병 소의 깊이는 $A군(5.08{\mu}m),\;B군(47.82{\mu}m,\;C군(8.42{\mu}m),\;D군(7.20{\mu}m),\;E군(85.41{\mu}m),\;F군(60.38{\mu}m),\;G군(60.13{\mu}m)$,이었다. 2. 인공우식 병소의 깊이에 있어서, B군은 A군,C군,D군과 비교하여 통계학적으로 유의성 있는 차이를 보였고(p<0.05), E군은 F군,G군과 비교하여 통계학적으로 유의성 있는 차이를 보였다(p<0.05). 3. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 예방효과가 있었다. 4. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 진행억제효과가 있었다. 5. 광중합형 및 자가중합형 교정용 전색제 표본에 대한 주사전자현미경적 연구에서 인공우식용액의 시간 경과에 따른 영향은 없었다. 6. 광중합형 교정용 전색제 표본과 자가중합형 교정용 전색제 표본 사이의 차이는 편광현미경과 주사전자현미경으로 구별할 수 없었다.

  • PDF

임플랜트 식립부위 형성시 골조직의 온도변화에 관한 연구 (A STUDY ON THE TEMPERATURE CHANGES OF BONE TISSUES DURING IMPLANT SITE PREPARATION)

  • 김평일;김영수;장경수;김창회
    • 대한치과보철학회지
    • /
    • 제40권1호
    • /
    • pp.1-17
    • /
    • 2002
  • The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.