• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.87.1-87.1
• /
• 2012

넓은 밴드갭 (3.37eV)과 높은 엑시톤 결합에너지 (60meV)를 가지는 ZnO 물질은 ultra violet light 센서 및 light emitting diode (LED)의 재료로써 많은 연구가 진행되고 있다. 특히 나노와이어 구조를 이용하여 소자를 만들 경우 양자효과와 1차원적 캐리어 수송경로 효과로 인하여 그 특성을 보다 향상 시킬 수 있다. 나노와이어를 이용한 이종접합 p-n 다이오드를 제작하기 위하여 ZnO와 격자상수가 비슷한 GaN, NiO, CoO와 같은 물질들이 나노구조 접합에 많이 쓰이고 있지만, 격자상수 차이로 인해서 접합부분 캐리어 수송효율이 떨어지는 단점을 가지고 있다. n-type과 p-type ZnO를 만들어 동종 접합을 만들 경우 이러한 문제점을 극복할 수 있지만, 도핑되지 않은 ZnO가 n-type을 특성을 나타내기 때문에 안정적인 p-type ZnO 합성에 대한 연구가 필수적이다. 본 연구에서는 안정적인 p-type ZnO 합성을 위해서 수열합성법을 이용하여 phosphorus (P) 도핑을 하였고, 나노와이어 diode 구조를 만들었다. P 도핑으로 인한 격자상수 변화는 x-ray diffraction (XRD)를 사용하여 확인하였고, x-ray photoelectron spectroscopy (XPS)를 통해 도핑 원소를 분석하였으며, 이때의 recification ratio, turn-on voltage 등의 전기적 특성을 평가하였다.

• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.143-143
• /
• 2010

In this study, we demonstrate that ZnO deposited onto $SiO_2$ substrates by magnetron sputtering produces p-type ZnO at higher $O_2$ pressure and n-type ZnO at lower $O_2$ pressure. We also report the effect of hydrogen peroxide ($H_2O_2$) on the stability of undoped ZnO thin films. The films were immersed in 30% $H_2O_2$ for 1 min at $30^{\circ}C$ and annealed in $O_2$at $450^{\circ}C$. The carrier concentration, mobility. and conductivity were measured by a Hall effect measurement system. The Hall measurement results for ZnO films untreated with $H_2O_2$ but annealed in $O_2$ indicate that oxygen fraction greater than ~0.5 produces undoped p-type ZnO films, whereas oxygen fraction less than ~0.5 produces undoped n-type ZnO films. This is attributed to the fact that the oxygen vacancies ($V_o$) decrease and the oxygen interstitials ($O_i$) or zinc vacancies ($V_{Zn}$) increase with increasing oxygen atoms incorporated into ZnO films during deposition and $O_2$ post-annealing.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.1
• /
• pp.24-27
• /
• 2008

ZnO has intensively attracted interest for the next generation of short wavelength LEDs and semiconductor lasers. However, for the development and application of the devices based on this material, the fabrication of p-type ZnO thin films is pivotal. Generally, the process of preparation of ZnO is unavoidably accompanied by the natural donor ions such as interstitial Zn ions and oxygen vacancy ions that show n-type electrical property and make fabrication of p-type ZnO to be a hard problem. On this study, to realize stable high-quality p-type ZnO thin films, the undoped ZnO thin films were diffused with P in vapor state. The ZnO:P thin films showed high-quality p-type properties electrically and optically.

• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.340-350
• /
• 2021

This study was conducted by utilizing the Q research method, which is one of the qualitative analysis methods that can approach the in-depth and essential meaning of consumers' restaurant O2O service operation behavior. The purpose of this study is to classify the behavior of restaurant O2O services by type, to find out the characteristics of variables, and to suggest future improvement directions. An exploratory study was conducted using the Q-methodology to analyze the subjective perception of the restaurant O2O service behavior. To this end, positive and negative statement cards were prepared, P samples were selected, and Q-sort, which was subjected to classification, was analyzed using the PC QUANL program and Q factor analysis. As a result of the analysis, it was classified into three single types. Type 1 【(N= 7: Restaurant O2O Service Convenience Syndrome Type】, Type 2 【(N= 7): Restaurant O2O Service Benefit Pursuit Type】, Type 3 【(N= 6): Restaurant O2O Service Convenience Type】 The name of the factor was set as [Type], and it was found that each type has different characteristics. Through this analysis, the marketing strategy according to each factor detected is presented, and the point of supplementing the restaurant's O2O service and the direction of future operation. services in future studies.

• Journal of Aquaculture
• /
• v.8 no.1
• /
• pp.59-67
• /
• 1995

Growth rate, first reproductive age, life span and total offspring numbers were measured to study the effects of water temperature and salinity on the propagation of rotifer, Brachionus plicatilis. Three types of rotifer, Large (L), Small (S) and Thailand Small (TS)-types, were cultured in the $4\times4$ factorial culture conditions with four different salinities (5, 15, 25 and $35\%o$) at each of four different water temperatures (15, 20, 25 and $29^{\circ}C$). The results are as follows; Under the 4 different salinity gradients %$(5\%o,\;15\%o,\;25\%o,\;and\;35\%o)\;at\;29^{\circ}C$, the mean growth rates of L, Sand TS-type were 0.60, 0.84 and 0.96, respectively. The first reproductive age of three types rotifer appeared to be early at high water temperature. The total offspring numbers of the three types were higher at $25^{\circ}C\;and\;29^{\circ}C$, with the maximum value of 28.3 on the average at $29^{\circ}C$ for TS-type, and the minimum value at $15^{\circ}C$ for S-type. Life span decreased with high water temperature and increased with low water temperature. L-type and TS-type rotifer showed the longest life span of 13.5 days on the average at $15^{\circ}C$, and S-type showed shortest 6.2 days on the average at $29^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.55-56
• /
• 2007

The p-type ZnO thin film, fabricated by means of the ampoule-tube method, was used to make the ZnO p-n junction, and its characteristics was analyzed. The ampoule-tube method was used to make the p-type ZnO based on the As diffusion, and the hall measurement was used to confirm that the p-type is formed. the current-voltage characteristics of the ZnO p-n junction were measured to confirm the rectification characteristics of a typical p-n junction and the low leakage voltage characteristics. Using the ampoule-tube to fabricate the p-type ZnO will provide a very useful technology for producing the UV ZnO LED and ZnO-based devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.65-66
• /
• 2008

The realization and origin of p-type ZnO are main issue for photoelectronic devices based on ZnO material. N-doped and nominally undoped p-type ZnO films were achieved on silicon (100) and homo-buffer layers by RF magnetron sputtering and post in-situ annealing. The undoped film shows high hole mobility of 1201 $cm^2V^{-1}s^{-1}$ and low resistivity of $0.0454\Omega{\cdot}cm$ with hole concentration of $1.145\times10^{17}cm^{-3}$. The photoluminescence(PL) spectra show the emissions related to FE, DAP and defects of $V_{Zn}$, $V_O$, $Zn_O$, $O_i$ and $O_{Zn}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.410-411
• /
• 2007

To investigate the ZnO LED which are interested in the next generation of short wavelength LEDs and Lasers, the ZnO thin films were deposited by RF magnetron sputtering system. The p-type ZnO thin film, fabricated by means of the ampoule-tube method, was used to make the ZnO p-n junction, and its characteristics was analyzed. The ampoule-tube method was used to make the p-type ZnO based on the As diffusion, and the hall measurement was used to confirm that the p-type is formed. the current-voltage characteristics of the ZnO p-n junction were measured to confirm the rectification characteristics of a typical p-n junction and the low leakage voltage characteristics. Analysis of ZnO LED V-I curve will provide a very useful technology for producing the UV ZnO LED and ZnO-based devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.145-146
• /
• 2006

The most Important research topic in the development of ZnO LED and LD is the production of p-type ZnO thin film that has minimal stress with outstanding stoichiometric ratio. In this study, Phosphorus diffused into the undoped ZnO thin films using the ampoule-tube method for the production of p-type znO thin films. The undoped ZnO thin films were deposited by RF magnetron sputtering system on $GaAs_{0.6}P_{0.4}$/GaP and Si wafers. 4N Phosphorus (P) was diffused into the undoped ZnO thin films in ampoule-tube which was performed and $630^{\circ}C$ during 3hr. We found the diffusion condition of the conductive ZnO films which had p-type properties with the highest mobility of above 532 $cm^2$/Vs compared with other studies PL spectra measured at 10K for the purpose of analyzing optical properties of p-type ZnO thin film showed strong PL intensity in the UV emission band around 365nm ~ 415nm and 365nm ~ 385nm.