• 제목/요약/키워드: O-shaped building

검색결과 9건 처리시간 0.02초

3D 프린터를 활용한 전단키 형상 몰드 제작 방법에 관한 연구 (Study on the Shear Key-shaped Mold making Method utilizing 3D Printers)

  • 장종민;장현오;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 춘계 학술논문 발표대회
    • /
    • pp.5-6
    • /
    • 2016
  • Due to the construction of high-rise and long axis etc, UHPC(Ultra High Performance Concrete) has attracted attention as a material that will replace the existing concrete. In order to improve the structural performance of each member joints, after demolding the concrete, method for surface treatment of the contact surface or by modifying the mold to create a shear key will be applied. In this study, to improve the conventional shear key manufacturing process, utilizing a 3d printer to produce a shear key plate. 3D printers have advantage it is inexpensively manufactured as compared with other production methods. Therefore, this study utilizes a 3D printer, we propose the shear key-shaped mold and plate shear key production measures.

  • PDF

보부재 불연속성과 수평비정형성을 고려한 건물의 풍하중과 지진하중에 의한 응답해석 (Structural Performance Assessment of Buildings Considering Beam Discontinuity and Horizontal Irregularity under Wind and Earthquake Loads)

  • 수딥타 차크라보르티;앰디 라지불 이스람;김두기
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권5호
    • /
    • pp.10-19
    • /
    • 2022
  • 구조물의 비정형성이 풍하중과 지진하중을 받는 구조물의 안전성에 미치는 영향에 대해 검토하였다. 층별 보부재의 불연속성과 O자형 수평비정형성의 관점에서 4가지 유형의 구조물을 선정하여 구조거동을 평가하였다. ACI 318-11 조건에 대해 풍하중 및 지진하중에 의한 구조물의 변위, 휨모멘트, 축력, 비틀림, 층간변위 응답을 검토하였다. 보부재 불연속성을 갖는 구조물의 상부에 갖는 건물이 가장 큰 복원력을 보였으며, O자형 수평비정형 건물은 전도에 대한 저항이 크므로 횡하중에 대해 안전하였다.

시공중인 합성바닥슬래브의 처짐보정에 대한 수치적 연구

  • 김영찬;이정헌
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 2002년도 춘계 학술논문발표회 논문집
    • /
    • pp.293-298
    • /
    • 2002
  • In the composite deck system, beams and deck plates deflect during construction. This lens-shaped deflection may cause problems in the serviceability of a building. Therefore, it should be compensated to be level. Several methods for leveling of floor slab are available, such as increasing stiffness of structural members, pouring additional concrete. In this study, additional weight and volume o( concrete for level compensation are examined for various size of floors.

  • PDF

Characterization of a Smelting Furnace in Ungyo Site in Wanju, Jeollabuk-do, Through Slag Analysis

  • Lee, Su Jeong;Cho, Nam Chul;Kang, Byoung Sun
    • 보존과학회지
    • /
    • 제35권4호
    • /
    • pp.373-383
    • /
    • 2019
  • We characterized the smelting process and smelting furnace through scanning electron microscopy-energy dispersive spectroscopy, wavelength dispersive X-ray fluorescence, X-ray diffraction, and raman micro-spectroscopy with 13 relics including slags and furnace walls excavated from square-shaped building sites and pits of the Three Kingdoms site at the Ungyo site section I. Our results revealed that the principal components were FeO and SiO2; and CuO, PbO, and ZnO were contained in small quantities. Furthermore, fayalite, magnetite, augite, copper, and cuprite were found. High contents of FeO or SiO2 components seem to have been added to form fayalite to remove gangue in the smelting process. The relatively low content of S detected in the copper prills suggests that roasting was performed well. Cristobalite and mullite, which are minerals that indicate high-temperature found in the furnace wall, show that the smelting temperature was higher than 1,250℃. The findings of this study show a high possibility that the Wanju Ungyo site is smelting remains of copper ores, which are nonferrous metals, rather than iron. Various smelting byproducts excavated in this area in the future will help us better understand the copper smelting process that may have been performed since ancient times.

건축 물량산출 활용을 위한 BIM품질기준 도입 방안 (Introduction of BIM Quality Standard for Quantity Take-off)

  • 권오철;조찬원;조주원
    • 한국건축시공학회지
    • /
    • 제11권2호
    • /
    • pp.171-180
    • /
    • 2011
  • 최근 국내외에서 건축물의 고층화 및 비정형화 추세 속에서 BIM기술이 활발히 이루어지고 있으나 설계단계의 BIM 데이터가 시공현장에 적극적으로 재활용되지는 못하고 있다. 건설 회사들의 주요 관심사는 공정 및 공사비 관리 등 여러 분야인데 BIM기술이 활발히 사용되기 위해서는 BIM 데이터가 이러한 용도로 활용될 수 있도록 올바르게 작성되어야 한다. 이를 위해서는 특히 BIM데이터를 건물 부재별로 수량을 올바르게 산출할 수 있도록 기준을 설정하여 BIM데이터를 작성하는 것이 필요하며 작성된 BIM데이터가 올바르게 만들어졌는지를 품질관리 차원에서 확인하는 것이 필요하다. 본 연구는 BIM기술이 건설현정의 공정 및 공사비 관리에 활용에 매우 중요한 물량산출을 올바르게 할 수 있도록 BIM데이터의 품질을 확보할 방안에 대한 제시를 목적으로 수행되었다.

고속버스, 승용차 O/D를 활용한 지방도시권의 교통네트워크 분석 (An Analysis on Traffic Networks of Local Metropolitan area Based on Express Bus and Car O/D)

  • 장환영;김남곤
    • 한국산학기술학회논문지
    • /
    • 제17권9호
    • /
    • pp.559-569
    • /
    • 2016
  • 본 연구에서는 교통연계성에 따른 각 권역별 네트워크 분석을 수행하여 우리나라의 국토공간 구조상에서 발생하는 지역 간 흐름을 살펴보고 그에 따른 향후 권역별 발전방향을 도출해보고자 한다. 이를 위해 국가교통DB센터에서 제공하는 2010년 전국 고속버스 OD 데이터를 활용하여 전국 단위의 교통 연계성을 먼저 살펴보고, 그 이후, 2010년 승용차 O/D 데이터를 활용하여 강원도, 경상남도, 경상북도, 전라남도, 전라북도, 충청도, 서울특별시 등 총 7개 권역(125개 시군+서울특별시)을 대상으로 네트워크 분석을 통해 권역 내 교통연계성을 살펴보았다. 분석결과, 우리나라는 수도권과 전라권, 경상권을 중심으로 하는 교통연계성이 강하게 나타남과 동시에 각 권역별로 내 외부 연계성이 상이하게 나타났다. 이는 곧 권역마다 차별적인 발전방안이 마련되어야 하는 근거를 시사하며 이에 본 연구에서는 연계성 분석결과와 더불어 대표적인 지역진단지표인 성장잠재력과 결합한 권역별 발전방향을 제시하였다. 본 연구는 국토공간의 균형적 발전과 각 권역별 맞춤형 정책개발 및 발전전략 수립의 기초자료로 활용될 수 있을 것으로 기대된다.

단속형 재료공급식 가변적층 쾌속조형공정 및 장치 개발에 관한 연구 (Investigation into Development of Transfer Type for Variable Lamination Manufacturing Process and Apparatus)

  • 안동규;이상호;최홍석;양동열;박승교
    • 한국정밀공학회지
    • /
    • 제19권2호
    • /
    • pp.95-105
    • /
    • 2002
  • In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. However, RP technologies have disadvantageous characteristics according to their working principle: low building speed, high cost for introduction and maintenance of RP apparatus, stair-stepped surface and additional post processing. A new rapid prototyping process, as a transfer type of Variable Lamination Manufacturing by using expandable polystyrene room (VLM-ST), has been developed to reduce building lime. apparatus cost including the introduction and the maintenance and additional post-processing. The objective of this study is to propose a VLM-ST process and to develop an apparatus for implementation of the process. Design criteria of the apparatus are defined and the techniques arc proposed to satisfy the design criterion. In order to examine the efficiency and applicability of the developed process, various three-dimensional shapes, such as a world-cup logo. a knob shape, an extruded cross, a twisted shape, a character, Son-o-kong. a helical gear shaped and a scissor shape are fabricated on the apparatus in which unit shape layer (USL) was generated to build up each layer.

Time dependent behavior of piled raft foundation in clayey soil

  • Fattah, Mohammed Y.;Al-Mosawi, Mosa J.;Al-Zayadi, Abbas A.O.
    • Geomechanics and Engineering
    • /
    • 제5권1호
    • /
    • pp.17-36
    • /
    • 2013
  • Settlement of the piled raft can be estimated even after years of completing the construction of any structure over the foundation. This study is devoted to carry out numerical analysis by the finite element method of the consolidation settlement of piled rafts over clayey soils and detecting the dissipation of excess pore water pressure and its effect on bearing capacity of piled raft foundations. The ABAQUS computer program is used as a finite element tool and the soil is represented by the modified Drucker-Prager/cap model. Five different configurations of pile groups are simulated in the finite element analysis. It was found that the settlement beneath the piled raft foundation resulted from the dissipation of excess pore water pressure considerably affects the final settlement of the foundation, and enough attention should be paid to settlement variation with time. The settlement behavior of unpiled raft shows bowl shaped settlement profile with maximum at the center. The degree of curvature of the raft under vertical load increases with the decrease of the raft thickness. For the same vertical load, the differential settlement of raft of ($10{\times}10m$) size decreases by more than 90% when the raft thickness increased from 0.75 m to 1.5 m. The average load carried by piles depends on the number of piles in the group. The groups of ($2{\times}1$, $3{\times}1$, $2{\times}2$, $3{\times}2$, and $3{\times}3$) piles were found to carry about 24%, 32%, 42%, 58%, and 79% of the total vertical load. The distribution of load between piles becomes more uniform with the increase of raft thickness.

아회도(雅會圖)에 나타난 조선후기 원림문화 (Landscape Gardening Culture in Late Joseon Dynasty Depicted in 'Ahoi-do' Paintings)

  • 임의제;소현수
    • 한국전통조경학회지
    • /
    • 제32권3호
    • /
    • pp.46-57
    • /
    • 2014
  • 본 연구는 조선후기에 성행한 아회도가 기록화의 가치를 지님에 주목하여 도판 자료를 분석함으로써 당시의 원림문화를 고찰하였다. 그 결과 아회도에 묘사된 원림의 경관과 이용행태의 양상을 다음과 같이 도출하였다. 첫째, 제택에서 아회의 주된 장소는 사랑마당과 후원이었으며, 대저택에서는 높은 담장 위에 정자를 설치하고 샛문을 두는 등 외원(外園)의 경영과 이를 염두에 둔 입지 선정이 주목된다. 둘째, 화훼류를 심은 화분은 주택 정원에서만 사용하고, 사랑마당의 화오(花塢)에 식물 없이 화분과 괴석분을 놓은 경우가 있었으며, 송첨과 그늘시렁 같은 식물 재료를 이용한 전통 차양시설을 설치하였다. 셋째, 제택과 별서 원림에서 괴석이 중요한 경관요소였으며, 일부는 태호석(太湖石)으로 묘사되어 조선후기 원림에 실제 도입된 것인지 그 여부가 주목된다. 넷째, 별서 원림은 목책, 바자울, 토담 등 다양한 재료로 낮은 울타리를 설치하여 차경을 도모하고, 마당을 확보하여 지당, 괴석과 노송, 대나무, 매화, 버들, 오동, 연, 파초를 심어 인위적 정원을 조성하였다. 다섯째, 조선후기 경화사족(京華士族)은 제택과 인접한 한양의 승경지에 별장형 별서를 조영하였다. 여섯째, 누정 원림은 수림(樹林), 기암(奇巖), 단애(斷崖), 수석(水石)이 아름다운 계류변의 자연성이 높은 지역에 입지하였으며, 정자의 뒤편은 대나무 숲으로 위요하고 앞쪽에는 소나무, 은행나무, 버드나무 정자목을 식재하였다. 일곱째, 아회의 장소로 선호되었던 승경의 구조는 기봉(奇峰)과 단애가 골격이 되고 폭포가 어울려 원경을 이루었으며, 부감(俯瞰)이 가능한 산봉우리 너럭이나 송림, 버드나무, 매화가 있는 계류변 너럭바위가 아회의 적지였다. 여덟째, 원림에서 소나무가 다른 수종에 비하여 선호된 수종으로 추정되며, 특히 노송(老松)을 단식(單植)하여 상징성을 강조하였다. 아홉째, 전다(煎茶)를 위한 이동식 다로(茶爐) 시설이 네 가지 유형의 원림 모두에 도입되었다. 열 번째, 길상적 경관요소들이 어우러진 원림은 문인들의 금기서화(琴棋書畵) 및 전다를 통한 탈속적 아회를 위한 풍류의 장이었다.