• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.99-105
• /
• 2018

Soils are generally classified as fine-grained or coarse-grained depending on the percentage content of the primary constituents. In reality, soils are actually made up of mixed and composite constituents. Soils primarily classified as fine-grained, still consists of a range of coarse particles as secondary constituents in between 0% to 50%. A laboratory scale model test was conducted to investigate the influence of coarse particles on the physical (e.g., density, water content, and void ratio) and mechanical (e.g., quick undrained shear strength) properties of primarily classified fine-grained cohesive soils. Pure kaolinite clay and sand-mixed kaolinite soil (e.g., sand content: 10%, 20%, and 30%) having various water contents (60%, 65%, and 70%) were preconsolidated at different stress levels (0, 13, 17.5, 22 kPa). The quick undrained shear strength properties were determined using the conventional Static Cone Penetration Test (SCPT) method and the new Fall Cone Test (FCT) method. The corresponding void ratios and densities with respect to the quick undrained shear strength were also observed. Correlations of the physical properties and quick undrained shear strengths derived from the SCPT and FCT were also established. Comparison of results showed a significant relationship between the two methods. From the results of FCT and SCPT, there is a decreasing trend of quick undrained shear strength, strength increase ratio ($S_u/P_o$), and void ratio (e) as the sand content is increased. The quick undrained shear strength generally decreases with increased water content. For the same water content, increasing the sand content resulted to a decrease in quick undrained shear strength due to reduced adhesion, and also, resulted to an increase in density. Similarly, it is observed that the change in density is distinctively noticeable at sand content greater than 20%. However, for sand content lower than 10%, there is minimal change in density with respect to water content. In general, the results showed a decrease in quick undrained shear strength for soils with higher amounts of sand content. Therefore, as the soil adhesion is reduced, the cone penetration resistances of the FCT and SCPT reflects internal friction and density of sand in the total shear strength.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.55-61
• /
• 2003

The objective of this study was to investigate the characteristics of nitrate removal by conducting the column test in order to see the performance of surfactant modified zeolite (SMZ) as a permeable reactive barrier material. The prediction of nitrate removal was tested using the one-dimensional advective-dispersive model fitted to the experimental breakthrough curve. A methodology for scaling up to in-situ permeable reactive barrier was also proposed. The breakthrough of nitrate in the column packed with SMZ was well predicted using linear equilibrium adsorption model. The breakthrough time and half-life obtained by breakthrough experiment with variation of flowrates were decreased with the increase of flowrates. When 10㎥/day of groundwater containing the 50 mg/l of nitrate is to be treated to satisfy the potable water quality criteria (10 mg/l) by SMZ reactive barrier, 300 tons of SMZ and about 6 years of breakthrough time will be required, suggesting that 165 million wons are needed as barrier material expenses in each 6 years besides the initial design and construction expenses and the minimal monitoring and maintenance expenses.

• Fisheries and Aquatic Sciences
• /
• v.21 no.2
• /
• pp.6.1-6.10
• /
• 2018

The intention of this study was to identify the bacterial pathogens infecting Oreochromis niloticus (Nile tilapia) and Clarias gariepinus (African catfish), and to establish the antibiotic susceptibility of fish bacteria in Uganda. A total of 288 fish samples from 40 fish farms (ponds, cages, and tanks) and 8 wild water sites were aseptically collected and bacteria isolated from the head kidney, liver, brain and spleen. The isolates were identified by their morphological characteristics, conventional biochemical tests and Analytical Profile Index test kits. Antibiotic susceptibility of selected bacteria was determined by the Kirby-Bauer disc diffusion method. The following well-known fish pathogens were identified at a farm prevalence of; Aeromonas hydrophila (43.8%), Aeromonas sobria (20.8%), Edwardsiella tarda (8.3%), Flavobacterium spp. (4.2%) and Streptococcus spp. (6.3%). Other bacteria with varying significance as fish pathogens were also identified including Plesiomonas shigelloides (25.0%), Chryseobacterium indoligenes (12.5%), Pseudomonas fluorescens (10.4%), Pseudomonas aeruginosa (4.2%), Pseudomonas stutzeri (2.1%), Vibrio cholerae (10.4%), Proteus spp. (6.3%), Citrobacter spp. (4.2%), Klebsiella spp. (4.2%) Serratia marcescens (4.2%), Burkholderia cepacia (2.1%), Comamonas testosteroni (8.3%) and Ralstonia picketti (2.1%). Aeromonas spp., Edwardsiella tarda and Streptococcus spp. were commonly isolated from diseased fish. Aeromonas spp. (n = 82) and Plesiomonas shigelloides (n = 73) were evaluated for antibiotic susceptibility. All isolates tested were susceptible to at-least ten (10) of the fourteen antibiotics evaluated. High levels of resistance were however expressed by all isolates to penicillin, oxacillin and ampicillin. This observed resistance is most probably intrinsic to those bacteria, suggesting minimal levels of acquired antibiotic resistance in fish bacteria from the study area. To our knowledge, this is the first study to establish the occurrence of several bacteria species infecting fish; and to determine antibiotic susceptibility of fish bacteria in Uganda. The current study provides baseline information for future reference and fish disease management in the country.

• Korean Journal of Microbiology
• /
• v.30 no.5
• /
• pp.391-396
• /
• 1992

Anabaena variabilis A TCC 29413. a photoautotrophic and nitrogen fixing cyanobacteria. was investigated on the environmental factors regulating the growth and nitrogen lixation activity. A good growth of cyanobacteria] cells was observed due to nitrogen t1xation by the heterocyst differentiation in nitrogen free Allen and Arnon (]/8) medium. The nitrogenase activity was appeared to be in proportion to the cell growth lor 6 days then drastically decreased in the later growth period when the nitraTe was accumulated to high level in the culture to cause the inhibition. The optima] conditions lilr the cell growth and nitrogenase activity of A. varillbili.l were anaerobic. IO.OO0 lux. $30^{\circ}C$ and pH 8 with the nitrogen Cree minimal medium. The activity was significantly inhihited by the low concentrations of ammonium and nitrate. but was stimulated b) the ]ow Ieve] of phosphate and carbonate sources. The treatments of several toxic heavy metals showed strong inhibition of the cell growth and nitrogenase activity by O.3~10 ppm in the order of $Hg^{2+}$ > $Cd^{2+}$ > $Co^{2+}$ > $Zn^{2+}$ > $Ph^{2+}$, and the concentrations for 50% inhibition of the maximum activity were 0.41. 0.47. 0.5 L 0.66 and 8.1 ppm. respectively. The addition of carbohydrates (0.5~ 1.0%) in the dark condition stimulated the growth and activity in the order of sucrose > fructose > glucose.

• Journal of Microbiology
• /
• v.44 no.2
• /
• pp.192-199
• /
• 2006

Pseudomonas putida KL47 is a natural isolate that assimilates benzene, 1-alkylbenzene $(C_1-C_4)$, biphenyl, p-cumate, and p-cymene. The genetic background of strain KL47 underlying the broad range of growth substrates was examined. It was found that the cym and cmt operons are constitutively expressed due to a lack of the cymR gene, and the tod operon is still inducible by toluene and biphenyl. The entire array of gene clusters responsible for the catabolism of toluene and p-cymene/p-cumate has been cloned in a cosmid vector, pLAFR3, and were named pEK6 and pEK27, respectively. The two inserts overlap one another and the nucleotide sequence (42,505 bp) comprising the cym, cmt, and tod operons and its flanking genes in KL47 are almost identical (>99 %) to those of P. putida F1. In the cloned DNA fragment, two genes with unknown functions, labeled cymZ and cmtR, were newly identified and show high sequence homology to dienelactone hydrolase and CymR proteins, respectively. The cmtR gene was identified in the place of the cmtI gene of previous annotation. Western blot analysis showed that, in strains F1 and KL47, the todT gene is not expressed during growth on Luria Bertani medium. In minimal basal salt medium, expression of the todT gene is inducible by toluene, but not by biphenyl in strain F1; however, it is constantly expressed in strain KL47, indicating that high levels of expression of the todST genes with one amino acid substitution in TodS might provide strain KL47 with a means of adaptation of the tod catabolic operon to various aromatic hydrocarbons.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.173-179
• /
• 1989

The influence of the storage temperature and time after slaughter on the thermal denaturation of PSE porcine muscle protein was studied by differential scanning calorimetry and by measuring the solubility of the sarcoplasmic proteins. In the DSC therodiagram a decrease of the endotherm enthalpy of the myosin plus sarcoplasmic proteins in PSE muscle could be observed with an increase in the storage temperature and time of post mortem. Storage temperature at $20^{\circ}C$ during the first four hours of post mortem resulted in relatively slight denaturation of myosin plus sarcoplasmic proteins in PSE muscle. Storage temperature above $25^{\circ}C$ caused to increase the denaturation of muscle proteins. The minimal drip loss in PSE muscle could be observed, when the muscle was cooled to $2^{\circ}C$ as quickly as possible post mortem. However, when stored for several hours of post morte at a temperature between $32^{\circ}C-38^{\circ}C$, the drip loss reached the level established for PSE muscle. The paleness of PSE muscle could be prevented to some extent by rapid chill to $20^{\circ}C$ post mortem. The more the muscle proteins in the PSE muscle become denatured during the early storage period of post mortem, the more the drip loss increases. With the increase in the denaturation of myosin plus sarcoplasmic proteins in PSE muscle with regard to temperature of post mortem, there was a corresponding decrease in the solubility of the sarcoplasmic proteins in PSE muscle.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.569-573
• /
• 2003

To determine the antimicrobial activity of methanol extracts form 'Formosa' plum against 4 kinds of pathogenic bacteria, the fermosa were got at different growth stages and were extracted using methanol, respectively. The Formosa methanol extracts treated with 5.0 mg/disc showed the highest antimicrobial activity against 4 kinds of pathogenic bacteria and those of Formosa 1-4(immature fruit), which thin out 10∼25 days before foal harvest, showed higher antimicrobial activity against gram positive and gram negative microorganisms than Formosa 5-6(mature fruit). Especially, the methanol extracts of Formosa 1 and 2 were exhibited the strongest growth inhibiting activities to these bacteria. The minimal inhibitory concentrations(MIC) of immature Fomosa methanol extracts was 320 $\mu\textrm{g}$/mL against Escherichia coli 0157:H7 and 160 $\mu\textrm{g}$/mL against Staphylococcus aureus respectively. The MIC of immature Formosa methanol extracts to Salmonella typhimurium and Listeria monocytogenes were 640 $\mu\textrm{g}$/mL. These results suggest that methanol extracs of immature formosa can be used as an effective natural antimicrobial agent in food.

• Journal of Internet Computing and Services
• /
• v.7 no.2
• /
• pp.23-35
• /
• 2006

This work presents o novel method which extract facial region und features from motion picture automatically and controls the 3D facial expression in real time. To txtract facial region and facial feature points from each color frame of motion pictures a new nonparametric skin color model is proposed rather than using parametric skin color model. Conventionally used parametric skin color models, which presents facial distribution as gaussian-type, have lack of robustness for varying lighting conditions. Thus it needs additional work to extract exact facial region from face images. To resolve the limitation of current skin color model, we exploit the Hue-Tint chrominance components and represent the skin chrominance distribution as a linear function, which can reduce error for detecting facial region. Moreover, the minimal facial feature positions detected by the proposed skin model are adjusted by using edge information of the detected facial region along with the proportions of the face. To produce the realistic facial expression, we adopt Water's linear muscle model and apply the extended version of Water's muscles to variation of the facial features of the 3D face. The experiments show that the proposed approach efficiently detects facial feature points and naturally controls the facial expression of the 3D face model.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.597-603
• /
• 2017

Objective : Several surgical methods have been reported for treatment of ossification of the posterior longitudinal ligament (OPLL) in the thoracic spine. Despite rapid innovation of instruments and techniques for spinal surgery, the postoperative outcomes are not always favorable. This article reports a minimally invasive anterior decompression technique without instrumented fusion, which was modified from the conventional procedure. The authors present 2 cases of huge beak-type OPLL. Patients underwent minimally invasive anterior decompression without fusion. This method created a space on the ventral side of the OPLL without violating global thoracic spinal stability. Via this space, the OPLL and anterior lateral side of the dural sac can be seen and manipulated directly. Then, total removal of the OPLL was accomplished. No orthosis was needed. In this article, we share our key technique and concepts for treatment of huge thoracic OPLL. Methods : Case 1. 51-year-old female was referred to our hospital with right lower limb radiating pain and paresis. Thoracic OPLL at T6-7 had been identified at our hospital, and conservative treatment had been tried without success. Case 2. This 54-year-old female with a 6-month history of progressive gait disturbance and bilateral lower extremity radiating pain (right>left) was admitted to our institute. She also had hypoesthesia in both lower legs. Her symptoms had been gradually progressing. Computed tomography scans showed massive OPLL at the T9-10 level. Magnetic resonance imaging of the thoracolumbar spine demonstrated ventral bony masses with severe anterior compression of the spinal cord at the same level. Results : We used this surgical method in 2 patients with a huge beaked-type OPLL in the thoracic level. Complete removal of the OPLL via anterior decompression without instrumented fusion was accomplished. The 1st case had no intraoperative or postoperative complications, and the 2nd case had 1 intraoperative complication (dural tear) and no postoperative complications. There were no residual symptoms of the lower extremities. Conclusion : This surgical technique allows the surgeon to safely and effectively perform minimally invasive anterior decompression without instrumented fusion via a transthoracic approach for thoracic OPLL. It can be applied at the mid and lower level of the thoracic spine and could become a standard procedure for treatment of huge beak-type thoracic OPLL.