• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.663-668
• /
• 2003

We studied a localized hologram recording method that can be used in a disk-shaped medium. In this method, the reference beam is focused by use of a cylindrical lens to get a thin spot in the medium, and then a hologram is recorded in that spot by illuminating the signal beam. Many localized holograms are multiplexed by shifting the medium by a distance more than the thin spot size of the reference beam. This method does not need recording-time scheduling for uniform diffraction efficiencies. We show that a minimal required thickness of the recording medium exists for a given spot size of the signal beam. We performed experiments for data storage and retrieval, and obtained a storage density of 20 bits/${\mu}{\textrm}{m}$$^2$ and a raw-bit error rate (RBER) of 2.5${\times}$10$^{-3}$ , when a 2 mm-thick Fe-doped LiNbO$_3$ crystal was used.

• Computers and Concrete
• /
• v.27 no.4
• /
• pp.319-332
• /
• 2021

The performance of gene expression programming (GEP) in predicting the compressive strength of bacteria-incorporated geopolymer concrete (GPC) was examined in this study. Ground-granulated blast-furnace slag (GGBS), new bacterial strains, fly ash (FA), silica fume (SF), metakaolin (MK), and manufactured sand were used as ingredients in the concrete mixture. For the geopolymer preparation, an 8 M sodium hydroxide (NaOH) solution was used, and the ambient curing temperature (28℃) was maintained for all mixtures. The ratio of sodium silicate (Na2SiO3) to NaOH was 2.33, and the ratio of alkaline liquid to binder was 0.35. Based on experimental data collected from the literature, an evolutionary-based algorithm (GEP) was proposed to develop new predictive models for estimating the compressive strength of GPC containing bacteria. Data were classified into training and testing sets to obtain a closed-form solution using GEP. Independent variables for the model were the constituent materials of GPC, such as FA, MK, SF, and Bacillus bacteria. A total of six GEP formulations were developed for predicting the compressive strength of bacteria-incorporated GPC obtained at 1, 3, 7, 28, 56, and 90 days of curing. 80% and 20% of the data were used for training and testing the models, respectively. R2 values in the range of 0.9747 and 0.9950 (including train and test dataset) were obtained for the concrete samples, which showed that GEP can be used to predict the compressive strength of GPC containing bacteria with minimal error. Moreover, the GEP models were in good agreement with the experimental datasets and were robust and reliable. The models developed could serve as a tool for concrete constructors using geopolymers within the framework of this research.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.139-146
• /
• 2021

In hybrid rocket combustion, the oxidizer swirl injection is frequently used to stabilize the combustion as the rotational velocity component affects the boundary layer flow. However, as the swirl strength increases, a problem arises where the combustion performance changes too much. Thus, this study attempts to control the low frequency instability while minimizing the change in combustion performance by adapting attenuated swirl injection with fuel insert used in reference [7]. To this end, a series of experimental tests were performed by varying swirl intensity and the location of the fuel insert. In the tests, the occurrence of combustion instability and combustion performance were closely monitored. The results confirmed that combustion instability was successfully suppressed at the condition of the swirl angle 6 degree and the location of fuel insert 310 mm. And, the changes in combustion pressure, O/F ratio, and fuel regression rate were found as minimal compared to the baseline case. Also the results reconfirmed that the formation of positive coupling between two high frequency oscillations in 500 Hz band, combustion pressure(p') and heat release oscillation(q'), is the necessary and sufficient condition of the occurrence of low frequency instability.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.139-144
• /
• 2022

This study reports a microfluidic approach to produce monodisperse hydrogel microparticles in a simple and highly efficient manner. Specifically, we produce double emulsion drops with a thin oil shell surrounding an aqueous prepolymer solution, which is solidified via UV-induced free radical polymerization. When they are dispersed in an aqueous solution, the oil shell is dewetted due to the absence of surfactants, resulting in production of highly uniform hydrogel microparticles (C.V.=1%). Results show that production of monodisperse hydrogel microparticles with controllable size and composition can be achieved with minimal use of oil unlike water-in-oil (w/o) single emulsion-based approach. Furthermore, in-depth study of flow patterns in microfluidic device using a phase diagram exhibits a crucial relationship among relative flow rates while providing windows of readily controllable parameters for reliable manufacturing of hydrogel microparticles.

• Parasites, Hosts and Diseases
• /
• v.62 no.1
• /
• pp.117-130
• /
• 2024

Ticks host different pathogens as endosymbiont and nonpathogenic microorganisms and play an important role in reproductive fitness and nutrient provision. However, the bacterial microbiomes of white-tailed deer ticks have received minimal attention. This study aimed to examine the bacterial microbiome of ticks collected from Odocoileus virginianus on the Mexico-United States border to assess differences in microbiome diversity in ticks of different species, sexes, and localities. Five different tick species were collected: Rhipicephalus microplus, Dermacentor nitens, Otobius megnini, Amblyomma cajennense, and A. maculatum. The tick microbiomes were analyzed using next-generation sequencing. Among all tick species, the most predominant phylum was Proteobacteria, followed by Actinobacteria and Firmicutes. The ticks from Tamaulipas and Nuevo León presented the highest bacterial species diversity. Acinetobacter johnsonii and A. lwoffii were the common bacterial species in the microbiome of all ticks, Coxiella were present in R. microplus, and Dermacentor nitens also exhibited a Francisella-like endosymbiont. The microbiome of most females in D. nitens was less diverse than that of males, whereas R. microplus occurs in females, suggesting that microbiome diversity is influenced by sex. In the bacterial communities of A. maculatum and O. megnini, Candidatus Midichloria massiliensis, and Candidatus Endoecteinascidia fumentensis were the most predominant endosymbionts. These results constitute the initial report on these bacteria, and this is also the first study to characterize the microbiome of O. megnini.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.43.1-43.4
• /
• 2016

Background: Supernumerary nostril is a congenital anomaly that contains additional nostril with or without accessory cartilage. These rare congenital nasal deformities result from embryological defects. Since 1906, Lindsay (Trans Pathol Soc Lond. 57:329-330, 1906) has published the first research of bilateral supernumerary nostrils, and only 34 cases have been reported so far in the English literature. Case presentation: A 1-year-old female baby was brought to our department group for the treatment of an accessory opening above the left nostril which had been presented since her birth. Medical history was non-specific and her birth was normal. The size of a supernumerary nostril was about 0.2 cm diameter and connected to the left nostril. The right one was normal. Minimal procedure was operated for the anomaly. After 1 year, rhinoplasty was performed for the nostril asymmetry. Conclusions: At 1 year follow-up, the functional and cosmetic result was satisfactory. In this case, it is important that we have early preoperative diagnosis. Also, it is desirable that we should perform a corrective surgery as soon as possible for the patient's psychosocial growth.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.121-130
• /
• 2011

If you ask many Stereographers how to make a good S3D and you will get all different answers. There are several 3D knowledges and opinions that were not always in agreement. we have to choose which advice to follow and find our own way. But there will be no durable screening of S3D films without a minimal viewing comfort of all the audience whatever the differences of their vision. First of all, We always consider several factors to get an appropriate S3D shot before moving on to production. This is intended to provide a practical example on S3D film production. I hope that this article will encourage further research on this topic.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.2
• /
• pp.169-175
• /
• 2000

The filamentous soil bacterium Streptomyces coelicolor is known to produce four distinct antibiotics. The simultaneous global regulation for the biosynthesis of those four antibiotics was previously confirmed by absA and absB mutations that blocked all four antibiotics' biosynthesis without influencing their morphological differentiation. To study the complex regulatory cascade that controls the secondary metabolism in Streptomyces, a new abs-like mutation was characterized. namely absR, which is slightly leaky on a complete R2YE medium, yet tight on a minimal medium. A genetic analysis of the absR locus indicated that it is located at 10 o'clock on the genetic map, near the site of absA. A cloned copy of the absA gene that encoded bacterial two-component regulatory kinases did not restore antibiotic biosyntheis to the absR mutant. Accordingly, it is proposed that absR is another abs-type mutation which is less tight than the previously identified absA or absB mutations income medium conditions, and can be used to characterize another global regulatory gene for secondary metabolete formation in S. coelicolor.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.361-365
• /
• 2002

Advancements in silicon phase control (SCR) technologies provide an arc welding power supply that has the capability to allow the alteration of the Alternating Current (AC) welding output. These technologies provide a square wave output involving sixteen frequency selections and multiple balance selections. While an AC out put is known to minimize magnetic disturbances associate with Direct Current (DC), the potentials of a non-sinusoidal waveform have not been explored. The focus of the paper is to determine the effects that the frequency and balance of an AC wave form output will have upon a high speed Submerge Arc (SAW) application. The test matrix of the project includes welding .250" steel plate. Joint type is square groove with a travel speed of 65 IPM. Each of the weld parameters was held constant, only the frequency and/or balance were altered between welds. Each frequency/balance combination involved three-gap spacing. Upon completion of the welds the bead profiles were measured and recorded. A relationships/trends were observed with various frequency and balance values. Optimum frequency and balance values were found for the .250" square groove application which permit consistent weld sizing, ease of slag removal, and minimal plate distortion.

• Journal of Hydrogen and New Energy
• /
• v.18 no.4
• /
• pp.406-412
• /
• 2007

An experimental study on the design of a catalytic combustor for 1.6 kW MCFC system has been performed. The roles of the catalytic combustor are to completely burn anode off-gas and to supply sufficient $CO_2$ to cathode channels. In order to avoid hot spot or fuel slippage, flow uniformity at the catalyst inlet was achieved by installing two crossing perforated plates between the catalyst and the mixing chamber with minimal pressure drop. A Pd/Ce/Ni-$Al_2O_3$ catalyst was used for complete combustion of the off-gas at GHSV=36,000.