• 한국약용작물학회지
• /
• 제13권2호
• /
• pp.80-84
• /
• 2005

Five known anthraquinones, physcion (1), I-O-methylemodin (2), emodin (3), $physcion-8-O-{\beta},-D-glucopyranoside$ (5), $emodin-8-O-{\beta},-D-glucopyranoside$ (6) and two known stilbenes, trans-resveratrol (4), $trans-resveratrol-3-O-{\beta},-D-glucopyranoside$ (7) were isolated from MeOH extract of Reynoutria sachalinensis (Polygonaceae). All structures were unambiguously established by 1D and 2D NMR and MS data and the compounds were evaluated for their cytotoxicity against L1210, HL-60, BI6F10 tumor cell lines in MTT assay. Among the compounds, trans-resveratrol (4) exhibited significant cytotoxic activity with $IC_{50}$ values of 9.2, 6.7 and $9.8\;{\mu}g/ml$, against the test cell lines respectively, but compounds 1-3 exhibited the moderate cytotoxic activity.

• 한국미생물·생명공학회지
• /
• 제50권2호
• /
• pp.211-217
• /
• 2022

차아염소산나트륨(NaClO)은 병원 및 식품산업 분야에서 널리 사용되는 소독제로 세균, 곰팡이, 바이러스에 대해서도 항균 활성이 있다. 차아염소산나트륨의 항균 활성은 용액의 pH에 의해 조절되는 안정적인 HClO 농도의 유지에 있다. 차아염소산(HClO)은 화학적으로 중성이므로 세균의 막에 쉽게 침투할 수 있으며 차아염소산나트륨의 항균 활성은 차아염소산염 이온(ClO^-)보다는 용액 내 HClO 농도에 의존하리라 사료된다. 본 연구에서 pH 조절에 따른 차아염소산나트륨의 항균 활성을 time kill test와 차아염소산나트륨 처리 전후의 활성산소종(ROS) 및 ATP 농도 변화로 조사하였다. 또한 전계방출형 주사 전자 현미경(FE-SEM)을 통하여 세포벽의 파괴정도를 확인하였다. pH 5 조건에서 5 ppm 차아염소산나트륨은 Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) 균에 대하여 99.9%의 항균 활성을 나타내었고, ROS 생성량은 pH 7 조건보다 48% 증가하였다. 또한, pH 5 조건의 차아염소산나트륨에 노출된 E. coli와 S. aureus의 ATP 농도가 각각 94%와 91% 감소하였다. FE-SEM 결과, pH 5 조건에 노출된 균의 세포벽이 파괴된 것을 확인하였다. 본 연구결과를 종합해보면, pH를 조절하는 것 만으로 5 ppm 농도의 차아염소산나트륨의 항균 활성을 향상시킬 수 있음을 시사한다.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.521-530
• /
• 2017

Improving the microstructure of NiO/YSZ is one of several approaches used to enhance the electrical and mechanical properties of an anode support in Solid Oxide Fuel Cells (SOFCs). The aim of the work reported in this paper was to predict the relationship between these microstructural changes and the resulting properties. To this end, modification of the anode microstructure was carried out using different sizes of Poly (Methyl Methacrylate) (PMMA) beads as a pore former. The electrical conductivity and mechanical strength of these samples were measured using four-probe DC, and three-point bend-test methods, respectively. Thermal etching followed by high resolution SEM imaging was performed for sintered samples to distinguish between the three phases (NiO, YSZ, and pores). Recently developed image analysis techniques were modified and used to calculate the porosity and the contiguity of different phases of the anode support. Image analysis results were verified by comparison with the porosity values determined from mercury porosimetry measurements. Contiguity of the three phases was then compared with data from electrical and mechanical measurements. A linear relationship was obtained between the contiguity data determined from image analysis, and the electrical and mechanical properties found experimentally. Based upon these relationships we can predict the electrical and mechanical properties of SOFC support from the SEM images.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.591-604
• /
• 2008

In this study, two design examples of drilled shafts on soft ground in Ho-Chi-Minh City, Vietnam are introduced. One is for a 27-story apartment and the other is for a Arch bridge over Saigon river. Unlikely the normal cases in Korea, all of the bored pile foundations are supposed to be placed on soil layers. Therefore, skin friction between pile and ground is the most crucial design parameter. Three methods using SPT N value of sandy soil -Korean Road Bridge Code(1996), Reese and Wright (1977), and O'Neill and Reese (1988)- were adopted to obtain an ultimate axial bearing capacity. In order to verify the calculated bearing capacity, 3 sets of static load test and a Osterberg Cell test were performed at an apartment site and a bridge site respectively. LRFD (Load Resistance Factored Design) method was compared with ASD (Allowable Stress Design) method. On application of ASD method, safety factor for skin friction was adopted as 2 or 3 while safety factor for end bearing was 3. The design bearing capacities from ASD method matched well with those from LRFD method when safety factor for skin friction was adopted as 2.

• 전기화학회지
• /
• 제3권1호
• /
• pp.44-48
• /
• 2000

상온에서 DC-magnetron sputtering으로 증착한 비정질의 $V_2O_5$ 박막을 양극물질로 하여 $V_2O_5/LIPON/Li$으로 구성된 박막형 리튬이차전지를 제작하였다. $V_2O_5$의 양극특성은 액체전해질을 이용한 half cell 구조에서 평가하였으며, $Ar/O_2$ 분압비의 변화에 따라 제작된 $V_2O_5$ 양극은 분압비 80/20에서 가장 좋은 특성을 보였다. 자체 제작한 $Li_3PO_4$ 타겟을 사용하여 RF-sputtering으로 순수한 질소 분위기 하에서 양극 위에 고체전해질 LIPON 박막을 형성하였으며, 1.2-4.0V vs. Li 구간에서 리튬에 대해 반응성이 없는 안정한 화합물임을 확인하였다. 음극으로 쓰인 약 $2{\mu}m$두께의 금속리튬박막은 진공 열 증착법으로 제조하였으며, $V_2O_5/LIPON/Li$의 박막형 리튬이차전지는 $1.2\~3.5V$ 구간에서 초기에 약 $150{\mu}A/cm^2{\mu}m$의 높은 방전용량을 나타내었다.

• Corrosion Science and Technology
• /
• 제3권3호
• /
• pp.98-101
• /
• 2004

The corrosion behavior of Al-Fe coatings was studied in the wet-seal atmosphere of molten carbonate fuel cells (MCFC). Fe-8Al, Fe-16Al, Fe-25Al, Fe-36Al, and Fe-70Al (in at.%) specimens were tested in Li/K carbonate at $650^{\circ}C$ by a single cell test and an immersion test. In general, the corrosion resistance of the Al-Fe coatings was enhanced due to the formation of a protective $LiAlO_2$ layer. However, when the Al-Fe coatings didn't have sufficient content of aluminum enough for maintaining the protective layer, the corrosion resistance of the Al-Fe coatings was severely degraded by the growth of non-protective scales like $LiAlO_2$. The test results revealed that the aluminum contents in the coatings should be higher than 25 at.% in order to form and maintain the protective $LiAlO_2$ layers.

• 한국수소및신에너지학회논문집
• /
• 제16권1호
• /
• pp.58-65
• /
• 2005

The $LaCrO_3$-dispersed Cr alloys for metallic interconnect of solid oxide fuel cell were prepared as a function of $LaCrO_3$ content in the range of 5 to 25 vol.% and were sintered at 1500$^{\circ}C$ under an Ar atmosphere with 5 vol.% $H_2$. The sintering and oxidation behaviors of these alloys were examined. The alloys indicated a good sinterability above 95% relative density at a given sintering condition, and their sintering densities is independent on $LaCrO_3$ content. The $LaCrO_3$ particles of the sintered alloys were concentrated on interfaces of Cr particles, and the size of the Cr particles increased with decreasing $LaCrO_3$ content, which is caused by inhibited grain growth of Cr particle by $LaCrO_3$ particle. The oxidation test showed all $LaCrO_3$-dispersed Cr alloys have good oxidation resistance as compared with pure Cr, which is attributed to presence of $LaCrO_3$ at the interface at which the oxidation reaction occurs rapidly. The Cr alloys with about 15 vol.% $LaCrO_3$ are very resistant to oxidation.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.491-496
• /
• 2017

The hydrogen($H_2$) is promising energy carrier of renewable energy in the microgrid system such as small village and military base due to its high energy density, pure emission and convenient transportation. $H_2$ can be generated by photocatalytic water splitting, gasification of biomass and water electrolysis driven by solar cell or wind turbine. Solid oxide electrolysis cells(SOECs) are the most efficient way to mass production due to high operating temperature improving the electrode kinetics and reducing the electrolyte resistance. The SOECs are consist of nickel-yttria stabilized zirconia(NiO-YSZ) fuel electrode / YSZ electrolyte / lanthanum strontium manganite-YSZ(LSM-YSZ) air electrode due to similarity to Solid Oxide Fuel Cells(SOFCs). The Ni-YSZ most widely used fuel electrode shows several problems at SOEC mode such as degradation of the fuel electrode because of Ni particle's redox reaction and agglomeration. Therefore Ni-YSZ need to be replaced to an alternative fuel electrode material. In this study, We studied on the Double perovskite $PrBrMnO_{5+{\delta}}$(PBMO) due to its high electric conductivity, catalytic activity and electrochemical stability. PBMO was impregnated into the scaffold electrolyte $La_{0.8}Sr_{0.2}Ga_{0.85}Mg_{0.15}O_{3-{\delta}}$(LSGM) to be synthesized at low temperature for avoiding secondary phase generated when it exposed to high temperature. The Half cell test was conducted at SOECs and SOFCs modes.

• 폴리머
• /
• 제24권6호
• /
• pp.877-885
• /
• 2000

본 연구에서는 폴리락타이드 (PLA), 폴리글리콜라이드 (PGA) 그리고 이들의 공중합체인 PLGA 필름을 염소산 혼합용액 [70% 과염소산 (HClO$_4$)/포타슘 클로레이트 (KClO$_3$) 포화 수용액, 3 : 2]으로 처리하여 표면의 젖음성과 세포적합성을 증가시켰다. 표면 처리된 고분자의 표면을 물접촉각 측정과 ESCA, SEM으로 특성결정하였다. 염소산 처리된 PLA, PGA, 및 PLGA의 표면 젖음성은 처리시간이 증가함에 따라 증가되었고 이들 고분자 필름은 기존의 에탄을 전처리와 달리 건조 후에도 친수성 표면을 유지하였다. 세포 점착실험은 섬유아세포를 염소산 처리된 필름의 표면에서 1일 및 2일 배양하였고 표면의 젖음성이 증가함에 따라 세포의 점착도 우세하였다. 결론적으로 본 연구에서는 표면의 젖음성은 세포의 점착과 증식 거동에 중요한 역할을 한다는 것을 증명하였다.

• Tissue Engineering and Regenerative Medicine
• /
• 제15권6호
• /
• pp.735-750
• /
• 2018

BACKGROUND: The major challenge of tissue engineering is to develop constructions with suitable properties which would mimic the natural extracellular matrix to induce the proliferation and differentiation of cells. Poly(${\varepsilon}$-caprolactone)-poly(ethylene glycol)-poly(${\varepsilon}$-caprolactone) (PCL-PEG-PCL, PCEC), chitosan (CS), nano-silica ($n-SiO_2$) and nano-hydroxyapatite (n-HA) are biomaterials successfully applied for the preparation of 3D structures appropriate for tissue engineering. METHODS: We evaluated the effect of n-HA and $n-SiO_2$ incorporated PCEC-CS nanofibers on physical properties and osteogenic differentiation of human dental pulp stem cells (hDPSCs). Fourier transform infrared spectroscopy, field emission scanning electron microscope, transmission electron microscope, thermogravimetric analysis, contact angle and mechanical test were applied to evaluate the physicochemical properties of nanofibers. Cell adhesion and proliferation of hDPSCs and their osteoblastic differentiation on nanofibers were assessed using MTT assay, DAPI staining, alizarin red S staining, and QRT-PCR assay. RESULTS: All the samples demonstrated bead-less morphologies with an average diameter in the range of 190-260 nm. The mechanical test studies showed that scaffolds incorporated with n-HA had a higher tensile strength than ones incorporated with $n-SiO_2$. While the hydrophilicity of $n-SiO_2$ incorporated PCEC-CS nanofibers was higher than that of samples enriched with n-HA. Cell adhesion and proliferation studies showed that n-HA incorporated nanofibers were slightly superior to $n-SiO_2$ incorporated ones. Alizarin red S staining and QRT-PCR analysis confirmed the osteogenic differentiation of hDPSCs on PCEC-CS nanofibers incorporated with n-HA and $n-SiO_2$. CONCLUSION: Compared to other groups, PCEC-CS nanofibers incorporated with 15 wt% n-HA were able to support more cell adhesion and differentiation, thus are better candidates for bone tissue engineering applications.