• 공업화학
• /
• 제8권6호
• /
• pp.985-993
• /
• 1997

구성분이 상이한 2종의 비산회를 대상으로 CaO와 MgO융제의 첨가시 용융온도변화에 대하여 고찰하였다. 용융온도측정을 위하여 ASTM 용융온도측정법과 시차열분석법이 사용되었다. CaO융제의 첨가시 시료에 따라 $111{\sim}294^{\circ}C$의 융점(IDT)강하효과를 얻을 수 있었으며 MgO첨가시에는 $80{\sim}224^{\circ}C$의 융점강하효과를 보였다. Base/Acid Ratio와의 비교에서 CaO flux는 0.7~0.8, MgO flux는 0.3~0.4의 범위에서 가장 낮은 용융온도로 측정되었다. 따라서 적은 첨가량으로도 MgO는 CaO보다 더 효과적인 융제로 작용하였다. 이러한 융제첨가시의 용융온도 변화는 용융성 분석에 보편적으로 사용되어지는 Base/Acid ratio와는 상관성이 없음을 알 수 있었고 $XO-SiO_2-Al_2O_3$ [X=Ca, Mg]삼성분계의 liquidus 온도와도 일치하지 않음을 알 수 있었다. 시차열분석결과와 ASTM용융온도와의 비교에서 용융성과 흐름성(점성)등의 물성이 복합적으로 반영되어 있는 ASTM측정법 보다는 시차열분석이 비산회의 순수한 용융온도를 분석할 수 있는 측정법임을 확인할 수 있었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.260-260
• /
• 1999

We compared c-axis tunneling characteristics of small stacked intrinsic Josephson junctions prepared on the surface of pristine, I-, and HgI$_2$-intercalated Bi$_2Sr_2CaCu_2O_{8+x}$ (Bi2212) single crystals. The R(T) curves are almost metallic in I-Bi2212 specimens, but semiconducting in HgI$_2$-Bi2212 ones.· The transition temperatures were 82.0 K, 73.0 K, and 76.8 K for pristine Bi2212, I-Bi2212, and HgI2-Bi2212 specimens, respectively, consistent with p-T$_c$ phase diagram. Current-voltage (IV) characteristics of both kinds of specimens show multiple quasiparticle branches with well developed gap features, indicating Josephson coupling is established between neighboring CuO$_2$ planes. The critical current I$_c$ of I-Bi2212 is almost the same as of that of pristine crystals, but I$_c$ is much reduced in Hgl$_2$-Bi2212. In spite of expanded interlayer distances, the interlayer coupling is not significantly affected in I-Bi2212due to holes generated by iodine atoms. The coupling in HgI$_2$-Bi2212 is, however, weakened due to inertness of HgI$_2$ molecules and the expansion of interlayer distance. Relation between the superconducting transition temperature T$_c$ and the critical current I$_c$ seems to contradict Anderson's interlayer-pair-tunneling theory but agree with a modified version of it.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.15-18
• /
• 2011

We have studied the $TiO_2$ doping effects on the flux pinning behavior of an $MgB_2$ superconductor synthesized by the in-situ solid-state reaction. From the field-cooled and zero-field-cooled temperature dependences of magnetization, the reversible-irreversible transition of $TiO_2$-doped $MgB_2$ was determined in the H-T diagram (the temperature dependence of upper critical magnetic field and irreversibility line). For comparison, the similar measurements are also obtained from SiC-doped $MgB_2$. The critical current density was estimated from the width of hysteresis loops in the framework of Bean's model at different temperatures. The obtained results manifest that nano-scale $TiO_2$ inclusions served as effective pinning centers and lead to the enhanced upper critical field and critical current density. It was concluded that the grain boundary pinning mechanism was realized in a $TiO_2$-doped $MgB_2$ superconductor.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.745-750
• /
• 2000

YAG:Tb3+ as green phosphor were studied for the development of low voltage FED phosphor prepared by hydrothermal synthesis. We changed the concentration of luminescence center ion Tb3+ in hydrothermal reaction of which conditions were at 8M NH4OH as mineralizer, at 35$0^{\circ}C$ for 12hrs. As results, we could finally get the YAG:Tb3+ (Y3-xTbxAl5O12) powder of which particle size was about 0.2~1.0${\mu}{\textrm}{m}$. The excitation spectra and the green emitted spectra of YAG:Tb3+ phosphor powder were observed. When we doped 0.25 mol Tb to YAG, we could observe the maximum cathodoluminescence from YAG:Tb3+ phosphor and the chromaticity coordinate of the phosphor was shown x=0.35, y=0.56 in CIE1931 diagram.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.5-12
• /
• 2001

Our experimental research focuses on manipulating pinning deflects to alter the phase diagram of vortex matter, creating new vortex phases. Vortex matter offers a unique opportunity for creating and studying these novel phase transitions through precise control of thermal, pinning and elastic energies. The vortex melting transition in untwinned YB $a_2$C $u_3$ $O_{7-}$ $\delta$/ crystals is investigated in the presence of disorder induced by particle irradiation. We focus on the low disorder regime, where a glassy state and a lattice state can be realized in the same phase diagram. We follow the evolution of the first order vortex melting transition line into a continuous transition line as disorder is increased by irradiation. The transformation is marked by an upward shift in the lower critical point on the melting line. With columnar deflects induced by heavy ion irradiation, we find a second order Bose glass transition line separating the vortex liquid from a Bose glass below the lower critical point. Furthermore, we find an upper threshold of columnar defect concentration beyond which the lower critical point and the first order melting line disappear together. With point deflect clusters induced by proton irradiation, we find evidence for a continuous thermodynamic transition below the lower critical point..

• 한국작물학회지
• /
• 제42권3호
• /
• pp.344-351
• /
• 1997

The experiment was conducted to examine the varietal variation in gelatinization of rice flour and adaptability to rice bread processing, and the interrelation among the relevant properties. IR 44 showed the lowest temperature of gelatinization onset(T$_{o}$ ) and the highest gelatinization enthalphy(ㅿH) measured by differential scanning calorimetry (DSC). The following lower T$_{o}$ was found with the order of Suweon 230＜Pusa-33-30＜T(N) 1, Daeribbyeo 1 and the next higher ㅿ.H was followed by the order of Pusa-33-30＞Suweon 230. IRAT 177 revealed the highest temperature of gelatinization onset and conclusion(T$_{c}$) and the following higher T$_{c}$ was found with the order of Pusa-33-30＞AC 27＞Nonganbyeo. The varietal range of T$_{o}$ and T$_{c}$ was 50.0~72.5$^{\circ}C$ and 70.2~87.4$^{\circ}C$, respectively. The rice materials tested can be classified by scatter diagram on the plane of upper two principal components contracted from DSC thermogram and various characteristics relevant to processing and sensory preference of rice bread by principal component analysis. AC27, Suweonjo and IR 44 among high-amylose rices showed better suitability to rice bread processing. The temperatures of gelatinization peak and conclusion of rice flour checked by DSC were significantly negatively associated with springiness of rice bread. The most properties relevant to processing and sensory preference of rice bread such as hardness, moistness, springiness, cohesiveness, specific loaf volume and distribution or size of air cell revealed the close correlation between each other.other.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.739-743
• /
• 2003

[ $Ba_2NaNb_5O_{15}$ ], hereafter BNN, thin films are attractive candidates for nonvolatile memory and electro-optic devices. In the present work, thin films that have different contents of Ba, Nb and Na have been prepared by H-MOD technique on silicon and Pt substrates. XRD and SEM were used to investigate the phase evolution behavior and the microstructure of the films. It was found that the films of about 500nm thick were crack-free and uniform in microstructure. Nb content strongly influenced the phase formation of the films, where unwanted phases were always formed at the stoichiometric BNN composition. However, the unwanted phases decreased with the increase of excess Nb content, and the single phase (tetragonal tungsten bronze structure) BNN thin film was obtained when the niobium content reached some point. From this study, the sub-solidus phase diagram below $850^{\circ}C$ for $BaO-Na_2O-Nb_2O_5$ ternary system is proposed.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.153-156
• /
• 2003

We have studied fabrication of $MgB_2$ thin film on $SrTiO_3$ (001) and r-cut $A1_2$$O_3$ substrates by rf magnetron sputtering method using and $ MgB_2$ single target and two targets of Mg and B, respectively. Based on P -T phase diagram of $MgB_2$ and vapor pressure curves of Mg and B, a three-step process was employed. B layer was deposited at the bottom to enhance the film adhesion to the substrate. Secondly, co-sputtering of Mg and B was done. Finally, Mg was sputtered on top to compensate fur the loss of Mg during annealing. Subsequently, $MgB_2$ films were in-situ annealed in various conditions. The sample fabricated using the three-step process showed $T_{c}$ of 24 K and formation of superconducting $MgB_2$ phase was confirmed by XRD spectra. In case of co-sputtering deposition, $T_{c}$ depended on annealing time and argon pressure. However, those made by single-target sputtering showed non-superconducting behavior or low transition temperature, at best.est.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.249-260
• /
• 2003

1998년 12월부터 1999년 5월까지 총 10일간 W UMa형 접촉쌍성 AH Cnc를 소백산천문대의 61cm 망원경과 PM512 CCD 카메라, 그리고 BVI 필터를 사용하여 CCD 측광을 수행하였다. 새롭게 얻은 BVI 광도곡선을 Wilson-Devinney 쌍성모델의 Mode 3(접촉형)으로 분석해서 측광해를 구하고 Roche 모형을 얻었다. 지금까지 발표된 모든 극심시각들과 이번 관측자료를 사용하여 얻은 (O-C)도를 분석해서 영년주기 증가율와 질량이동률을 계산하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.1029-1036
• /
• 2012

Push-pull-type copolymers - low-band-gap copolymers of electron-rich fused-ring units (such as cyclopentadithiophene; CPDT) and electron-deficient units (such as benzothiadiazole; BT) - are promising donor materials for organic solar cells. Following a design principles proposed in our previous study, we investigate the electronic structure of a series of new CPDTBT derivatives with various electron-withdrawing groups using the time-dependent density functional theory and predict their power conversion efficiency from a newlydeveloped protocol using the Scharber diagram. Significantly improved efficiencies are expected for derivatives with carbonyl [C=O], carbonothioyl [C=S], dicyano [$C(CN)_2$] and dicyanomethylene [C=$C(CN)_2$] groups, but these polymers with no long alkyl side chain attached to them are likely to be insoluble in most organic solvents and inapplicable to low-cost solution processes. We thus devise several approaches to attach alkyl side chains to these polymers while keeping their high efficiencies.