• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.149-156
• /
• 2011

There is much information of equipment in shop floor because the manufacturing processes are different as the equipment within the manufacturing process is varied. To provide effective process information to MES and other production systems, the DAS requires an equipment monitoring system that takes into account the characteristics of the equipment on the shop floor. In this study, we proposed some methods for collecting the required information about various equipments on a shop floor. The equipments such as CNC can be interfaced with the DAS by using a PLC-based method and a sensor-based interface board can be used to interface general equipments. The proposed methods can be used to collect information on the shop floor in real-time. Moreover these methods are very adaptive and can be easily modified according to the changes made to the shop floor. The information about a real shop floor acquired by employing these methods is saved in a database and the can be provided to a supervisor and MES so that they are aware of the status of the shop floor.

• Nutritional Sciences
• /
• v.5 no.1
• /
• pp.3-8
• /
• 2002

The purpose of this study was to investigate the effects of L-carnitine administration on lipid metabolism in streptozotocin-induced diabetes. Diabetes was induced by a single intraperitoneal injection of streptozotocin (50 mg/kg b.w.) and was confirmed by determination of urinary glucose secretion. Diabetic rats in the three L-carnitine treated groups were given L-carnitine, 50(D5O), 100(D100) and 200 (D200) mg/kg body weight, by subcutaneously every other day for four weeks, while animals in normal (N) and diabetic (DM) groups for control received saline by the same method. The daily weight gain was not different between normal and diabetic rats, but daily dietary intake was significantly higher in diabetic rats than in normal rat. Diabetic rats had a significantly lower carnitine concentration in both serum and liver compared to normal rats. Total carnitine concentration in serum was increased dose dependently upon carnitine administration, but statistic significance was shown only in D200 group. Diabetic rats had significantly higher serum triglyceride and cholesterol concentrations compared to normal rats. However there were no significant differences in liver L-carnitine administration to diabetic rats significantly decreased serum triglyceride but not cholesterol concentrations. In liver, triglyceride and cholesterol concentrations were not attired by L-carnitine administration. These results indicated that streptozotocin induced-diabetic rats have decreased carnitine and increased lipid concentrations compared with normal rats. Also it indicated that L-carnitine administration has an effect on the normalization of serum triglyceride concentrations in diabetic rats.

• Korean Journal of Metals and Materials
• /
• v.50 no.2
• /
• pp.164-170
• /
• 2012

Nanotubular structure formation on the Ti-6Al-4V and Ti-Ta alloy surfaces by electrochemical methods has been studied using the anodizing method. A nanotube layer was formed on Ti alloys in 1.0 M $H_3PO_4$ electrolyte with small additions of $F^-$ ions. The nanotube nucleation and growth of the ${\alpha}$-phase and ${\beta}$-phase appeared differently, and showed different morphology for Cp-Ti, Ti-6Al-4V and Ti-Ta alloys. In the ${\alpha}$-phase of Cp-Ti and martensite ${\alpha}^{\prime}$ and in the ${\alpha}^{{\prime}{\prime}}$ and ${\beta}$-phase of the Ti-Ta alloy, the nanotube showed a clearly highly ordered $TiO_2$ layer. In the case of the Ti-Ta alloy, the pore size of the nanotube was smaller than that of the Cp-Ti due to the ${\beta}$-stabilizing Ta element. In the case of the Ti-6Al-4V alloy, the ${\alpha}$-phase showed a stable porous structure; the ${\beta}$-phase was dissolved entirely. The nanotube with two-size scale and high order showed itself on Ti-Ta alloys with increasing Ta content.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.193-196
• /
• 2005

Low resistance Ni thin films for using NiSi formation and metallization by atomic layer deposition (ALD) method have been studied. ALD temperature window is formed between $200^{\circ}C\;and\;250^{\circ}C$ with deposition rate of $1.25{\AA}$/cycle. The minimum resistance of deposited Ni films shows $4.333\;{\Omega}/\square$ on the $SiO_2/Si$ substrate by $H_2$ direct purging process. The reason of showing the low resistance is believed to be due to format ion of the $Ni_3C$ phase by residual carbon in Bis-Ni The deposited film exhibits excellent step coverage in the trench having 1(100 nm) : 16 (1.6 um) aspect ratio.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.145-152
• /
• 2019

The metal-manufacturing method and smelting temperature of ancient metal-production processes have been studied by analyzing the principal elements and microstructures of slag. However, the microstructure of slag varies according to the solidification cooling rate and types and relative amounts of various oxides contained within the smelting materials. Hence, there is a need for accurate analysis methods that allow slag to be distinguished by more than its composition or microstructure. In this study, the microstructures of slag discharged as a result of smelting iron sands collected from Pohang and Gyeongju, as well as the slag excavated from the Ungyo site in Wanju, were analyzed by using metalloscopy, scanning election microscopy-energy dispersine X-ray spectroscopy(SEM-EDS) and wavelength dispersive X-ray fluorenscence(WD-XRF). Furthermore, the microcrystals were accurately characterized by performing Raman micro-spectroscopy, which is a technique that can be used to identify the microcrystals of slags. SEM-EDS analysis of Pohang slag indicated that its white polygonal crystals could be Magnetite; however, Raman micro-spectroscopy revealed that these crystals were actually $ulv{\ddot{o}}spinel$. Raman micro-spectroscopy and SEM-EDS were also used to verify that the coarse white dendritic structures observed in the Gyeongju-slag were $W{\ddot{u}}stites$. Additionally, the Wanju slag was observed to have a glassy matrix, which was confirmed by Raman micro-spectroscopy to be Augite. Thus, we have demonstrated that Raman micro-spectroscopy can accurately identify slag microcrystals, which are otherwise difficult to distinguish as solely based on their chemical composition and crystal morphology. Therefore, we conclude that it has excellent potential as a slag analysis technique.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.83-83
• /
• 2017

Electrorefining is a key step in pyroprocessing. The electrorefining process is generally composed of two recovery steps - the deposit of uranium onto a solid cathode and the recovery of the remaining uranium and TRU elements simultaneously by a liquid cadmium cathode. The solid cathode processing is necessary to separate the salt from the cathode since the uranium deposit in a solid cathode contains electrolyte salt. Distillation process was employed for the cathode processing. It is very important to increase the throughput of the salt separation system due to the high uranium content of spent nuclear fuel and high salt fraction of uranium dendrites. In this study, a mesh-covered crucible was investigated for the sat distillation of electrorefiner uranium deposits. A liquid salt separation step and a vacuum distillation step were combined for salt separation. The adhered salt in uranium deposits was efficiently removed in the mesh-covered crucible. The salt distiller was operated simply since repeated cooling - heating step was not necessary for the change of the crucible. The operation time could be reduced by the use of the mesh-covered crucible and the combined operation of the two steps. A method to preserve a vacuum level was proposed by double O-rings during the operation of the distiller with the mesh-covered crucible. After the salt distillation, the salt content was measured and was below 0.1wt% after the salt distillation. The residual salt after the salt distillation can be removed further during melting of uranium metal.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.74-74
• /
• 2002

Production of u 1-antitrypsin ($\alpha$AT) in transgenic cows has a great value in the field of medicine. The present study was conducted to determine the effect of chemically defined KSOM media on in vitro development of bovine transgenic nuclear transfer (NT) embryos. An expression plasmid for human $\alpha$AT was constructed by inserting a bovine beta-casein promoter, a green fluorescent protein (GFP) marker gene, and a human $\alpha$AT target gene into a pcDNA3 plasmid. Cumulus cells as donor nuclei in NT were collected from a Holstein cow and transfected by lipid-mediated method using FuGene6 (Roche Molecular Biochemicals, USA) as reagent. GFP expressed cumulus cells were introduced into recipient oocytes under DIC microscopy equipped with FITC filter set. After electrical fusion and chemical activation, reconstructed embryos were cultured in 1) SOF + 0.8% BSA, 2) KSOM + 0.8% BSA, 3) KSOM + 10% FBS and 4) KSOM +0.01% PVA for 192 h at 39$^{\circ}C$ with 5% $CO_2$, 5% $O_2$ and 90% $N_2$in humidified condition. The development of the embryos was recorded and the GFP expression in blastocyst was determined under FITC filter. The average fusion rate was 73.8% (251/340; n=8). The development rates to 2-4 cells, morula, blastocysts and expression rates in blastocysts varied from 70.3 to 76.5%, 30.2 to 33.8%, 25.4 to 33.8% and 11.8 to 15.6%, respectively. The difference in development and expression rates of embryos among 4 culture groups was not significant (P>0.05). This study indicates that chemically defined KSOM medium is also able to support development of bovine transgenic NT embryos at similar rate of SOF or KSOM supplemented with BSA or serum.

• The Plant Pathology Journal
• /
• v.40 no.3
• /
• pp.261-271
• /
• 2024

Sulfur is one of the inorganic elements used by plants to develop and produce phytoalexin to resist certain diseases. This study reported a method for preparing a material for plant disease resistance. Sulfur nanoparticles (SNPs) stabilized in the chitosan-Cu²⁺ (CS-Cu²⁺) complex were synthesized by hydrolysis of Na₂S₂O₃ in an acidic medium. The obtained SNPs/CS-Cu²⁺ complex consisting of 0.32% S, 4% CS, and 0.7% Cu (w/v), contained SNPs with an average size of ~28 nm as measured by transmission electron microscopy images. The X-ray diffraction pattern of the SNPs/CS-Cu²⁺ complex showed that SNPs had orthorhombic crystal structures. Interaction between SNPs and the CS-Cu²⁺ complex was also investigated by ultraviolet-visible. Results in vitro nematicidal effect of materials against Meloidogyne incognita showed that SNPs/CS-Cu²⁺ complex was more effective in killing second-stage juveniles (J2) nematodes and inhibiting egg hatching than that of CS and CS-Cu²⁺ complex. The values of LC₅₀ in killing J2 nematodes and EC₅₀ in inhibiting egg hatching of SNPs/CS-Cu²⁺ complex were 75 and 51 mg/l, respectively. These values were lower than those of CS and the CS-Cu²⁺ complex. The test results on the nematicidal effect against M. incognita on coffee pots showed that the SNPs/CS-Cu²⁺ complex was 100% effective at a concentration of 150 mg/l. Therefore, the SNPs/CS-Cu²⁺ complex could be considered as a biochemical material with potential for agricultural applications to control root-knot nematodes.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.1 s.23
• /
• pp.163-171
• /
• 1988

The paralytic shellfish poisoning was occurred among 25 laborers who worked at breaking-up of ships in Pusan for 5 days from March 29 to April 2 of 1956. For the purpose of accurately defining the paralytic shellfish poison(PSP) , the authors carried out mouse bioassay and chemical analysis. The results were summarized as follows: 1. The mean amount of Paralytic shellfish toxin was $1,207.8{\mu}g$ Per 100gm meat, and the mean death time of mouse was 5 minutes 16 second. 2. The properties of the PSP were mainly gonyautoxin group by chemical analysis(TLC, IR, $^{1}H-NMR$).