• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1745-1747
• /
• 2004

In order to anticipate gradual increase of fault current in electric power systems, current limiting technology and current limiting device has been investigated for a long time. But the commercial use of current limiting device was delayed due to the lack of effective method to insert impedance to the elective power systems without loss and surplus defects. However, novel current limiting device, which use superconducting materials, was considered as a dream technology to be applied in a distribution and transmission lines. LG Industrial systems and KERPI started to investigate resistive type superconducting fault current limiters in order to develop 154kV fault current limiters and this year, we succeed to test 3 phase 6.6kV/200A fault current limiters. Based on these achievements, 24kV superconducting fault current limiters will be realized withing 3 years which could be tested in a real fields. In this paper, the developments of fault current limiting module which use YBCO thin films, cryogenic systems, the structure and construction of 3 phase fault current limiters and finally the test results of 6.6kV superconducting fault current limiters will be introduced.

• 공업화학
• /
• 제26권3호
• /
• pp.362-365
• /
• 2015

본 연구에서는 polyoxyethylenenonylphenylether (NP5) 계면활성제와 sodium bis(2-ethylhexyl) sulfosuccinate (AOT) 계면활성제가 형성하는 두 종류의 W/O 마이크로에멀젼을 이용해서 실리카에 담지된 ZnSe 양자점을 제조하였다. 본 방법으로 3 nm 크기의 cubic zinc blende 결정 구조를 갖는 ZnSe 입자를 합성하였으며 약 20 nm 크기의 실리카 입자에 효과적으로 담지 시킬 수 있었다. 합성된 입자의 photoluminescence (PL) 주변 온도 의존성을 $30^{\circ}C$에서 $60^{\circ}C$ 범위에서 확인한 결과, 온도가 증가함에 따라 PL intensity가 감소하였으며 PL intensity와 온도와는 높은 상관관계를 나타내었다. 아울러 PL intensity와 온도의 상관관계는 온도를 낮은 곳에서 올려가며 측정한 경우와 반대로 낮추며 측정한 경우 같은 상관도를 나타내어 온도 의존성이 가역적임을 알 수 있었다. 그 결과 실리카에 담지된 ZnSe 양자점이 온도 센서로 사용될 수 있는 잠재적인 매체임을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권11호
• /
• pp.1519-1523
• /
• 2006

Through a screening and selection approach method, decamer random markers were used in a technique called random amplified polymorphic DNA (RAPD) assay with 252 genomic DNAs isolated from four major Haimen chicken populations: Rugao (62), Jiangchun (62), Wan-Nan (63) and Cshiqishi (65). A total of 3-score decamer random primers (S241-S260, S1081-S1100 and S1341-S1360) were employed in the preliminary RAPD-polymerase chain reaction (RAPD-PCR) assay with 50 random template DNA samples from all the populations. Four (6.67%) of the primers that produced obvious polymorphic patterns, interpretable and reproducible bands were selected and used with both the individual DNAs from each population and with pooled DNA samples of the four populations in subsequent analyses. The selected primers produced a total of 131 fragments with molecular size ranging from 835 to 4,972 base pairs (bp) when used with the individual DNAs; 105 (80.15%) of these fragments were polymorphic. With the pooled DNAs, 47 stable and characteristic bands with molecular size ranging from 840 to 4,983 bp, of which 23 (48.94%) polymorphic, were also generated. The band-sharing coefficient (BSC) calculated for the individuals in the population and among populations of bulked samples was between 0.8247 (Rugao) and 0.9500 (Cshiqishi); for pairwise populations, it was between 0.7273 (Rugao vs. Wan-Nan) and 0.9367 (Jiangchun vs. Cshiqishi) chicken populations. Using the BSC for individual and pairwise populations, the Nei's standard genetic distances between the chicken populations were determined and ranged from 0.0043 (Jiangchun vs. Cshiqishi) to 0.1375 (Rugao vs. Cshiqishi). The reconstructed dendrogram linked the Jiangchun and Cshiqishi chickens as closely related populations, followed by Wan-Nan, while the Rugao was the most genetically distant among the populations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.278-278
• /
• 2016

Solution-processed metal-oxide semiconductors have been considered as the next generation semiconducting materials for transparent and flexible electronics due to their high electrical performance. Moreover, since the oxide semiconductors show high sensitivity to light illumination and possess persistent photoconductivity (PPC), these properties can be utilized in realizing optical memory devices, which can transport information much faster than the electrons. In previous works, metal-oxide semiconductors are utilized as a memory device by using the light (i.e. illumination does the "writing", no-gate bias recovery the "reading" operations) [1]. The key issues for realizing the optical memory devices is to have high photoconductivity and a long life time of free electrons in the oxide semiconductors. However, mono-layered indium-zinc-oxide (IZO) and mono-layered indium-gallium-zinc-oxide (IGZO) have limited photoconductivity and relaxation time of 570 nA, 122 sec, 190 nA and 53 sec, respectively. Here, we boosted up the photoconductivity and relaxation time using a double-layered IZO/IGZO active layer structure. Solution-processed IZO (top) and IGZO (bottom) layers are prepared on a Si/SiO2 wafer and we utilized the conventional thermal annealing method. To investigate the photoconductivity and relaxation time, we exposed 9 mW/cm2 intensity light for 30 sec and the decaying behaviors were evaluated. It was found that the double-layered IZO/IGZO showed high photoconductivity and relaxation time of 28 uA and 1048 sec.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.229-233
• /
• 2015

Currently, the majority of commercial white LEDs are phosphor converted LEDs made of a blue-emitting chip and YAG yellow phosphor dispersed in organic silicone. However, silicone in high-power devices results in long-term performance problems such as reacting with water, color transition, and shrinkage by heat. Additionally, yellow phosphor is not applicable to warm white LEDs that require a low CCT and high CRI. To solve these problems, mixing of green phosphor, red phosphor and glass, which are stable in high temperatures, is common a production method for high-power warm white LEDs. In this study, we fabricated conversion lenses with LUAG green phosphor, SCASN red phosphor and low-softening point glass for high-power warm white LEDs. Conversion lenses can be well controlled through the phosphor content and heat treatment temperature. Therefore, when the green phosphor content was increased, the CRI and luminance efficiency gradually intensified. Moreover, using high heat treatment temperatures, the fabricated conversion lenses had a high CRI and low luminance efficiency. Thus, the fabricated conversion lenses with green and red phosphor below 90 wt% and 10 wt% with a sintering temperature of $500^{\circ}C$ had the best optical properties. The measured values for the CCT, CRI and luminance efficiency were 3200 K, 80, and 85 lm/w.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.202.1-202.1
• /
• 2015

탄소의 $sp^2$ 혼성으로 이루어진 2차원 단일시트(two-dimensional single sheet)인 그래핀은 기계적, 열역학적, 전기적 특성이 매우 우수하며 특히 고유연성과 투명성을 가진다는 장점 때문에 오랜 기간 주목 받으며 다양한 분야에서 연구되어 왔다. 이러한 그래핀을 만드는 방법에는 화학적 증기 증착법 및 흑연으로부터의 물리적, 화학적 박리 방법이 있다. 양질의 그래핀을 대면적에서 획득 할 수 있는 화학적 증기 증착법의 경우 높은 공정 비용과 함께 수반되어야 하는 전사과정의 어려움으로 인하여 실제 상용화에 어려움이 있다. 이러한 단점의 극복을 위해 대량의 그래핀을 저렴하게 확보 할 수 있는 화학적 박리 방법이 주목을 받고 있다. 화학적 박리 방법의 경우 박리 과정에서 수반되는 산화 그래핀의 환원과정이 필요하였으며, 이를 위해 강력한 환원제를 이용한 화학적 환원 방법, 고온에서의 열처리를 이용한 열역학적 환원 방법, 및 빛을 노광시켜 산화 그래핀을 환원시키는 광학적 방법이 시도되었다. 화학적 및 열역학적 환원방법의 경우 고품질의 환원된 산화 그래핀을 획득 할 수 있으나, 강한 환원제 및 높은 열처리 온도로 인하여 유연 기판의 사용이 제한되는 단점이 있다. 이러한 단점을 극복하기 위해 빛을 이용한 광학적 방법이 제시되었으나, 환원과정에 사용되는 단파장의 자외선 광원의 높은 가격으로 인하여 경제성의 확보가 제한된다. 본 논문에서는 우수한 광학적 특성을 보이는 란타넘족 이온을 사용하여 선택적 파장 대에서 높은 광흡수도를 가지는 산화 그래핀-란타넘 이온 혼합용액을 만들었으며, 가시광선대역의 파장을 가지는 레이저를 사용하여 우수한 품질을 가지는 환원된 산화 그래핀을 제작하였다. 구체적으로 산화 그래핀은 modified hummer's method를 이용하여 만들어졌으며, 자외선 대역을 흡수하는 $Gd_{3+}$, 녹색 레이저를 흡수하는 $Tb_{3+}$, 적색 레이저를 흡수하는 $Eu^{3+}$를 1 mM 섞어주었다. 그 후, 300~800 nm의 파장을 가지는 레이저를 $1mW/cm^2$를 노광시켜 산화 그래핀을 환원시켰다. 환원된 산화 그래핀의 특성은 FT-IR, UV-Vis, 저온 PL, SEM, XPS 및 전기측정을 이용해 측정하여 재현성 및 반복성을 확인하였다.

• Applied Microscopy
• /
• 제14권2호
• /
• pp.81-93
• /
• 1984

Structural differences in various divisions of the rabbit colon were investigated using light and scanning electron microscopy. For light microscopic study, various Portions of the colon from seven rabbits (2.5 kg body weight) were fixed in 10% neutral buffered formalin, and paraffin sections were stained with hematoxylin-eosin. Tissues for scanning electron microscopy were fixed in 1% glutaraldehyde-1.5% paraformaldehyde and postfixed in 1% $OsO_4$, dehydrated to 100% alcohol, transfered to isoamilacetate and dried by the critical point method. Subsequently, specimens were coated with gold and viewed with a JSM-35C scanning electron microscope. The colon displays a morphological diversity along its proximo-distal axis. Five regions can be discerned based on the macroscopic and microscopic characteristics. 1) The first segment immediately distal to the cecocolical junction possessing three teniae is approximately 5 cm ($4{\sim}6cm$) in length, and displays irregular folds of the mucosa oriented transversely similar to those of the cecum. 2) The second segment possessing three teniae is about 7 cm ($5{\sim}8cm$) in length, and is characterized by the papilla-like protrusions on the mucosal surface. 3) The third segment, possessing a single tenia is about 16 cm ($12{\sim}20cm$) in length, and also displays the papilla-like protrusions similar to the aforegoing segment. 4) Fusus coli, approximately 4 cm ($3{\sim}5cm$) in length, is free of teniae and exhibits longitudinal folds on the mucosal surface. These four portions together constitute the proximal colon. 5) The distal colon reaches a length of about 58 cm ($53{\sim}55cm$) and shows a pattern of surface irregularities with minor ridges on the mucosal folds.

• Composites Research
• /
• 제18권5호
• /
• pp.1-8
• /
• 2005

여러 복합재료 제작기법 중에서 필라멘트 와인딩 제작 기법은 압력탱크, 파이프 등과 같은 실린더 형태의 축대칭 구조물의 제작에 가장 효율적인 방법이다. 또한, 필라멘트 와인딩으로 제작된 복합재료 압력탱크는 운용 중 큰 내압을 받게 되며 복잡한 손상 메커니즘과 파손 모드를 가지고 있다. 그러므로, 필라멘트 와인딩으로 제작된 복합재료 압력탱크는 탱크의 제작 과정과 제작 후 전 과정 동안의 탱크에 대한 건전성 모니터링이 필요하며 이를 위해 탱크의 제작 시부터 탱크 내부의 여러 지점에 센서가 삽입 적용되어야 한다. 여러 센서 중에서 광섬유 센서는 복합재료 내부에 삽입이용이한 센서이며 특히, 광섬유 브래그 격자 센서(fiber Bragg grating Sensors, FBG센서)는 다중화(multiplexing)가 용이한 것을 큰 장점으로 가장 많이 채택되고 있다. 하지만, FBG 센서를 필라멘트 와인딩된 복합재료 압력탱크에 성공적으로 삽입 적용하기 위해서는 극심한 탱크의 삽입 환경에 대한 센서의 삽입 기법의 개발이 선행되어야 한다. 본 연구에서는 필라멘트 와인딩된 복합재료 압력탱크의 제작 시 FBG 센서를 탱크 내부에 다중화하여 삽입적용하기 위한 기법에 대하여 연구하였다.

• Advances in Traditional Medicine
• /
• 제8권2호
• /
• pp.196-203
• /
• 2008

The methanol extract of the root of Artanema sesamoides Family Scrophuilariaceae (MEAS) was investigated for possible analgesic and anti-inflammatory effects in animals. Three models were used to study the extract effects on nociception, which were acetic acid-induced writhing response, hot-plate method and the tail flick test in mice. The antiinflammatory effects were evaluated using carrageenan, dextran, histamine and serotonin induced rat paw oedema (acute) and cotton pellet induced granuloma (chronic) models in rats. Results of the study revealed that the extract exhibited significant (P < 0.001) analgesic effect at a dose of 50, 100 and 200 mg/kg b.w p.o in mice in all the models. In acute model, the MEAS also exhibited significant (P < 0.001) antiinflammatory effect in all the above mentioned doses. In chronic model (cotton pellet induced granuloma) the MEAS 200 mg/kg and indomethacin 10 mg/kg showed that inhibition of granuloma formation 25.0% and 47.7% respectively (P < 0.001). The MEAS and indomethacin were effectively preventing the transudation of the fluid. Thus, the present study revealed that the methanol extract of the root of Artanema sesamoides exhibited significant analgesic and antiinflammatory activity.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.61-71
• /
• 1996

In acid-catalyzed acetal cyclization of long aliphatic aldehydes($R=n-C_7H_{15}$ ; $n-C_9H_{19}$ ; $n-C_{11}H_{23}$) with 1,1,1-tris(hydroxymethyl)propane, 2-alkyl-5-hydroxymethyl-5-ethyl-1,3-dioxanes were obtained. The final products, sodium 2-alkyl-5-(sulfonatedpropylethermethyl)-5-ethyl-1,3-propanesultion in the presence of sodium hydride. These compounds were a new group of destructible surfactants which were readily hydrolyzed and oxidized in natural water reservoirs. Physical properties of these new compounds involved some surface properties such as Krafft point(Kp), critical micelle concentration(cmc), surface tension of aqueous solutions near cmc(${\gamma}_{min}$), foaming power, emulsion power and hydrolysis properties were determined. The destructible surfactants containing 1,3-dioxane ring were synthesized to about $85{\pm}5.5%$ yield. The cmc values of the compounds by ring method were assumed to $0.5{\sim}5.0{\times}10^{-3}mol/L$ range and surface tensions at cmc were $29.5{\sim}33.0dyne/cm$ respectively at $25^{\circ}C$. The foaming power and foam stability were $170{\sim}230mm$ and $52{\sim}135mm$ respectively at $1{\times}10^{-2}mol/L$, foam was occurred rarely below $1{\times}10^{-3}mol/L$. The emulsion property of liquid paraffin was better than that of soybean oil. For hydrolysis property with ph and time, these compounds were decomposed within about 200minutes at $ph1{\sim}2$. Hopefully these compounds are expected to be a good O/W emulsifier that have decomposability in acid and may be used in the process which do not need foaming.