• 대한화장품학회지
• /
• 제20권1호
• /
• pp.64-81
• /
• 1994

유화제로 polyoxyethylene(20)sorbitan monostearate, sorbitan sesquioleate을 혼합 사용하고, 분산상으로 liquid paraffin, 연속상으로 deionized water를 원료로 사용하여 Direct유화법을 이용한 전상법과 Invert유화법을 3가지 단계의 제조방법으로 나누어서 O/W에멀젼을 제조하였고, 각 단계 전상유화법에서 첨가되는 물의 양에 따른 최종 O/W에멀젼의 입자크기변화를 관찰하였다. Direct유화법을 이용한 2단계 전상유화법을 사용하여 제조한 결과, 미세하고 균일한 입자를 갖는 O/W에멀젼은 W/O에서 (W/O)W 이중에멀젼으로의 전환 단계를 거쳐야만 생성됨을 알 수 있었다. Invert유화법을 사용한 3단계전상유화법은 W/O 에서 일종의 Pseudomicroemulsion gel상을 거쳐 미세하고 균일한 O/W유화 입자가 얻어졌다. 3단계 전상법이 2단계 전상법보다 더 미세하고 균일한 입자를 생성하였다. 실험에서 사용한 모든 유화법에서 혼합유화제의 HLB가 10.0 - 10.8 영역에서 가장 미세한 에멀젼입자가 형성되었다. 이 HLB영역에서 혼합유화제가 용해되어있는 오일상에 첨가되어 가용화되는 물의 양이 최대로 많았으며, 최대 가용화 물양을 갖는 유화제의 조성에서 가장 미세하고 균일한 입자가 얻어졌다.

• 대한화장품학회지
• /
• 제42권2호
• /
• pp.127-133
• /
• 2016

본 연구에서는 정제수/Span 80-Nikkol BL 25/오일계의 water-in-oil (W/O) 나노에멀젼을 높은 온도에서 PIC 유화로 제조하였다. 이 방법은 본 시스템에서 미세하게 분산된 저점도의 W/O 나노에멀젼의 형성을 가능케 하였다. 그러나 실온에서 PIC 방법으로 제조된 에멀젼은 나노에멀젼보다는 마크로에멀젼이 제조되었다. 유화온도가 $30^{\circ}C$에서 $80^{\circ}C$로 증가하면 온도에 따른 계면장력의 큰 변화의 결과로 입자 크기는 $2{\mu}m$에서 100 nm 정도로 감소하였다. $80^{\circ}C$에서 제조된 나노에멀젼의 입자 크기는 50 ~ 200 nm 범위에 있었고 내상의 분율은 15 wt%까지 가능하였다. 또한 혼합 유화제의 최적 HLB는 7.0 부근에서 가장 안정한 나노에멀젼이 형성되었다. 제조된 나노에멀젼은 1개월 이상 실온에서 안정하였다. 본 연구 결과는 저점도의 W/O 나노에멀젼의 형성 최적화에 중요한 정보를 제공할 수 있다. 이 결과는 W/O 나노에멀젼의 저점도로 인한 부드러운 사용감 등으로 화장품 제형으로 유용하게 이용될 것으로 생각된다.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.221-230
• /
• 1984

In this study an investigation was made to determine optimum ratio between $SO_3$, MgO and $K_2O$ that maximizes $C_2S$ formation in Clinkering reaction Using response surface analysis method. It was proved that 1) Residual $K_2O$ int he clinker should be converted to $K_2SO_4$ because $K_2SO_4$ has less effect on the burnability than $K_2O$, 2) Optimum ratio if $SO_3$/K2O is 1.5, 3) Optimun balance between $CaSO_4$ and MgO is to be adjusted to such a level that w/o SO3=0.7(w/o MgO-2).4) In case of lack of $K_2O$ free CaO was minimized when $K_2SO_4$=2.3w/o and MgO=1.5w/o but if remaining $K_2O$ was 2w/o free CaI was minimized in the level that $K_2SO_4$=2.3w/o and MgO =1.5 w/o but if remaining $K_2O$ was 2 w/o free CaO was minimized in the level that $K_2SO_4$=4.5w/o and MgO =3.0 w/o.

• Journal of Pharmaceutical Investigation
• /
• 제28권3호
• /
• pp.159-164
• /
• 1998

The O/W and W/O emulsions containing Scutellariae Radix extract(SRE) which is very slightly soluble in oil phases and sparingly soluble in water phases, were prepared by homogenizing water and oil phases with emulsifier. The diameters of emulsion were ranged from 100 to $300\;{\mu}m$. The viscosity of W/O emulsion was higher than that of O/W emulsion. W/O emulsion was more stable than O/W emulsion which was gradually degraded when tested by centrifuge method and temperature tolerance method at $50^{\circ}C$. The antibacterial activity of two emulsions was not significantly different from that of aqueous solution of SRE, and showed similar MIC and bacterial growth inhibition rate.

• Journal of Pharmaceutical Investigation
• /
• 제35권1호
• /
• pp.33-38
• /
• 2005

Recently increasing attention has been focused on solid lipid nanoparticles (SLN) as a parenteral drug carrier due to its numerous advantages that can come from both polymeric particle and fat emulsions, together with the possibility of controlled release and increasing drug stability. Lipophilic drugs such as paclitaxel, cyclosporin A, and all-trans retinoic acid have been successfully entrapped in SLN but the incorporation of hydrophilic drugs in SLN is very limited because of their very low affinity to the lipid. Therefore, as a new approach to improve the loading of hydrophilic drugs, a w/o/w emulsion technique has been developed. The primary objective of the current study was to improve the loading efficiency of a model hydrophilic drug, glycine (Log P = -3.44) into SLN. The proposed preparation process is as follows: A heated aqueous phase consisting of 0.1 ml of glycine solution in water (100 mg/ml), and poloxamer 188 (5 mg) were then added to a molten oil phase containing precirol (100 mg) and lecithin (5 mg). This mixture was dispersed by sonicator, leading to a w/o emulsion. A double emulsion (w/o/w) was formed after the addition of 2% poloxamer solution to the above dispersed system. After cooling the double emulsion, solid lipid nanosuspensions were successfully formed. The lipid nanoparticles had the mean particle size of 441.25 nm, and the average zeta potential of -20.98 mV. The drug loading efficiency was measured to be 8.54% and the drug loading amount was measured to be 0.92%. The w/o/w emulsion method showed an increased loading efficiency compared to conventional o/w emulsion method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.237-238
• /
• 2008

The films of Vanadium tungsten oxide, $V_{1.85}W_{0.15}O_5$, were grown on Pt/Ti/$SiO_2$/Si substrate by RF sputtering method. The $V_{1.85}W_{0.15}O_5$ thin films deposited on Pt/Ti/$SiO_2$/Si substrates by RF sputtering method exhibited fairly good TCR and dielectric properties. It was found that film crystallinity, dielectric properties, and TCR properties were strongly dependent upon the annealing temperature. The dielectric constants of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $300^{\circ}C$ were 55, with a dielectric loss of 1.435, respectively. Also, the TCR values of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $300^{\circ}C$ were about -3.6%/K.

• Archives of Metallurgy and Materials
• /
• 제67권4호
• /
• pp.1507-1510
• /
• 2022

An optimum route to synthesis the W-based composite powders with homogeneous dispersion of oxide nanoparticles was investigated. The La₂O₃ dispersed W powder was synthesized by ultrasonic spray pyrolysis using ammonium metatungstate hydrate and lanthanum nitrate. The dispersion of Y₂O₃ nanoparticles in W- La₂O₃ powder was carried out by a polymer addition solution method using yttrium nitrate. XPS and TEM analyses for the composite powder showed that the nano-sized La₂O₃ and Y₂O₃ particles were well distributed in W powder. This study suggests that the combination processing of ultrasonic spray pyrolysis and polymeric additive solution is a promising way to synthesis W-based composite powders.

• Journal of Pharmaceutical Investigation
• /
• 제37권4호
• /
• pp.211-216
• /
• 2007

The bark of Alnus japonica has been used for the treatment of fever, hemorrhage and diarrehea in oriental traditional medicine. Recently, it was revealed that the diarylheptanoids from the bark of Alnus japonica possess anti-inflammatory activity and are expected to be applicable for atopic dermatitis. In this study, oregonin, one of major active components in the bark of Alnus japonica, was developed in the form of semisolid formulations for topical delivery. Oregonin was incorporated into four ointment bases: O/W cream, W/O cream, hydrophilic ointment and lipophilic ointment. Oregonin release from all formulation prepared was evaluated. Franz cell method and immersion method were employed to characterize the release patterns of drug from each formulation based on solvent availability. O/W cream showed a better release profile than the other formulations when evaluated with Franz cell method with an order of O/W cream, hydrophilic ointment, W/O cream and lipophilic ointment. In the immersion method, hydrophilic ointment showed the greatest release rate at times 1 hour exceeding compared to other bases with an order of hydrophilic ointment, O/W cream, W/O cream and lipophilic ointment. Hydrophilicity and solvent availability of formulation seems to significantly influence the release rate of oregonin from ointment bases. In this study, we successfully characterized the oregon in ointment and found that o/w cream is a promising formulation for the topical delivery of oregonin.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.673-679
• /
• 2004

A microbial cryoprotectant formulation using a W/O/W multiple emulsion system was developed. The psychrotolerant microorganism, B4, isolated from soil in South Korea, was observed by the drop freezing method, in which the microorganism sample inhibited ice nucleation activity. The antifreeze activity was eliminated when the microorganism sample was treated with protease, indicating that the antifreeze activity was due to the presence of antifreeze protein. The result of the l6S rDNA sequencing indicated the B4 strain was most closely related to a species of the genus Bacillus. Culture broth of B4 strain (Bacillus sp.) and rapeseed oil containing 1 % polyglycerine polyricinolate (PGPR) were used as core and wall material, respectively. The most stable W/O emulsion was prepared at a core/oil ratio of 1:2. The highest W/O/W emulsion stability was achieved when the primary emulsion to external aqueous phase containing 0.5% caster oil polyoxyethylene ether $(COG25^{TM})$ ratio was 1:1. Microcrystalline cellulose showed better W/O/W emulsion stability than other polymer types. The viability of cells in a W/O/W emulsion was higher than free cells during storage at $37^\circ{C}$. An acidic pH and UV exposure decreased the viability of free cells, but cells in W/O/W emulsion were more stable under these conditions.

• 에너지공학
• /
• 제2권2호
• /
• pp.194-199
• /
• 1993

인산형 연료전지에서 cathode 및 anode 전극의 반응 면적을 넓혀 전극성능을 향상시키고자 전극 촉매층에 가스 확산로를 도입하였다. 촉매층의 제작은 기체확산로로 이용하고자 제조된, 촉매가 담지되어 있지 않은 PTFE/carbon과 10w/o의 촉매가 담지된 Pt/carbon을 혼합 비율을 달리하면서 촉매 분말법으로 제작하였다. PTFE를 60w/o 담지한 PTFE(60 w/o)/carbon 분말과 Pt(10 w/o)/carbon분말을 7 : 3의 비율로 혼합하여 제조된 전극이 가장 우수한 성능을 보였다. 이들 조성을 변화시키면서 전극의 다공성과 전극성능을 비교 검토하여 본 결과 전극성능은 기체 확산로로 이용되는 macro pore와 전해질의 침투로 이용되는 micro pore 모두가 많이 형성됨에 따라 향상되었음을 알 수 있었다. 이때 전극에 담지된 백금 촉매의 양은 0.2mg/$\textrm{cm}^2$이었으며 PTFE함량은 42w/o이었다. 작동온도 15$0^{\circ}C$, 단자전압 0.7 V에서 전류밀도는 220 ㎃/$\textrm{cm}^2$이었다.