• 해양환경안전학회지
• /
• 제21권6호
• /
• pp.759-769
• /
• 2015

본 논문에서는 12펄스 정류기의 커패시터 중앙 DC버스에 개선된 보조전원장치를 설치하는 방법을 제안하였다. 11차 및 13차 고조파가 감소하는 이론적인 배경을 다루었으며 부하전류의 크기, 전원전압의 위상 및 크기, 커패시터 전압에 따라 개선된 보조전원의 파형 및 크기가 어떻게 제어되어야 하는지를 제시하였다. 기존의 구형파 보조전원장치를 적용한 경우는 전 영역에서 고조파 왜형률이 6~60[%]로 큰 편차를 보이지만 본 눈문에서 제안하는 개선된 보조전원장치를 적용한 경우 저 부하에서 고 부하에 이르는 전 영역에서 57~71[%] 라는 안정되고 뛰어난 고조파 왜형율 저감 효과를 보인다. 특히 10[%] 부하상태에서 기존방식은 고조파 왜형율 저감 효과가 6[%]로 효과가 거의 없지만 제안된 방식은 71[%]라는 놀라운 저감성능을 보여주고 있다. 소프트웨어 PSIM을 활용하여 컴퓨터 시뮬레이션을 통해 제안된 방식의 유효성을 입증하였다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1273-1279
• /
• 2016

Production of iodine-131 by neutron activation of tellurium in tellurium dioxide ($TeO_2$) material requires a target that meets the safety requirements. In a radiopharmaceutical production unit, a new lid for a can was designed, which permits tight sealing of the target by using tungsten inert gaswelding. The leakage rate of all prepared targets was assessed using a helium mass spectrometer. The accepted leakage rate is ${\leq}10^{-4}mbr.L/s$, according to the approved safety report related to iodine-131 production in the TRIGA Mark II research reactor (TRIGA: Training, Research, Isotopes, General Atomics). To confirm the resistance of the new design to the irradiation conditions in the TRIGA Mark II research reactor's central thimble, a study of heat effect on the sealed targets for 7 hours in an oven was conducted and the leakage rates were evaluated. The results show that the tightness of the targets is ensured up to $600^{\circ}C$ with the appearance of deformations on lids beyond $450^{\circ}C$. The study of heat transfer through the target was conducted by adopting a one-dimensional approximation, under consideration of the three transfer modes-convection, conduction, and radiation. The quantities of heat generated by gamma and neutron heating were calculated by a validated computational model for the neutronic simulation of the TRIGA Mark II research reactor using the Monte Carlo N-Particle transport code. Using the heat transfer equations according to the three modes of heat transfer, the thermal study of I-131 production by irradiation of the target in the central thimble showed that the temperatures of materials do not exceed the corresponding melting points. To validate this new design, several targets have been irradiated in the central thimble according to a preplanned irradiation program, going from4 hours of irradiation at a power level of 0.5MWup to 35 hours (7 h/d for 5 days a week) at 1.5MW. The results showthat the irradiated targets are tight because no iodine-131 was released in the atmosphere of the reactor building and in the reactor cooling water of the primary circuit.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.324-333
• /
• 2013

Recently, rudder erosion due to cavitation has been frequently reported on a semi-spade rudder of a high-speed large ship. This problem raises economic and safety issues when operating ships. The semi-spade rudders have a gap between the horn/pintle and the movable wing part. Due to this gap, a discontinuous surface, cavitation phenomenon arises and results in unresolved problems such as rudder erosion. In this study, we made a rudder model for 2-D experiments using the NACA0020 and also manufactured gap flow blocking devices to insert to the gap of the model. In order to study the gap flow characteristics at various rudder deflection angles($5^{\circ}$, $10^{\circ}$, $35^{\circ}$) and the effect of the gap flow blocking devices, we carried out the velocity measurements using PIV(Particle Image Velocimetry) techniques and cavitation observation using high speed camera in Seoul National University cavitation tunnel. To observe the gap cavitation on a semi-spade rudder, we slowly lowered the inside pressure of the cavitation tunnel until cavitation occurred near the gap and then captured it using high-speed camera with the frame rate of 4300 fps(frame per second). During this procedure, cavitation numbers and the generated location were recorded, and these experimental data were compared with CFD results calculated by commercial code, Fluent. When we use gap flow blocking device to block the gap, it showed a different flow character compared with previous observation without the device. With the device blocking the gap, the flow velocity increases on the suction side, while it decreases on the pressure side. Therefore, we can conclude that the gap flow blocking device results in a high lift-force effect. And we can also observe that the cavitation inception is delayed.

• 근관절건강학회지
• /
• 제7권2호
• /
• pp.281-293
• /
• 2000

This study was conducted to identify the relationships among self-care agency, family support, qualify of life in patients with rheumatoid arthritis. The subjects were 120 rheumatoid arthritis patients who attended RA O.P.D. at a university hospital, located in Daegu city, from 10th of May in 1998 to 30th of July in 1998. Three structure questionnaires were administered for explore three main research variables; 소향숙's self-care agency scale, 강현숙's family support scale, and 김종임's quality of life scale of RA patien. Data analysis was conducted with SPSS program including percentage, mean, standard deviation, mean score, Pearson Correlation Coefficient, multiple regression, and Cronbach's Alpha. Results are summarized as follows; 1. The mean of RA patient's self-care agency was 136.62, the mean of family support 37.38, and the mean of qualify of life 134.41. 2. Subject's self-care agency was positively correlated with family support(r=.2446) and with quality of life(r=.4341). Subject's family support was positively correlated with quality of life(r=.2630). 3. Stepwise multiple regression was used to determine the predictors of subject's quality of life. Significant predictors for subject's quality of life were self-care agency(t=4.873 p=0.0000), family support(t=4.480 p=0.0000) and the severity of arthralgia(t=-3.838, p=0.0002). The number of joints involved and the periods of illness did not show significant contribution to subject's quality of life. Self-care agency, family support, and family support explained 40. 39% of the variance in RA patient's quality of life. Given this results, it is suggested that a repeated study to measure RA patient's self-care practice in their own life may be needed to develope and validate an optimum level of nursing intervention for RA patient with which family support will be encouraged and patient's self-care agency will be facilitated.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.57-66
• /
• 1990

The author conducted a dental survey of college girl students and compared with that of college students 20 years and 10 years ago which based on the same criteria. The items of this survey included the prevalence of dental caries, DMFT and the kinds of restored materials. College girl students 2,294 were examined in May 1988, with the recommended criteria and method of W.H.O.. Among them, the data of 2,243 were analyzed and compared with the data of 1968 and 1978. The following results were obtained : 1. The average number of present teeth was $28.86{\pm}1.65$, which does not show much difference when compared to $29.00{\pm}1.94$ of 1968 and $28.97{\pm}1.64$ of 1978. 2. The prevalence of dental caries was 86.22%, which increased in comparison to 83.25% of 1968 and 84.92% of 1978. 3. DMF index was 19.98, which considerably increased in comparison to 14.56 of 1968 and 15.51 of 1978. 4. The number of DMFT was $5.75{\pm}5.04$ per student. Compared to $4.23{\pm}3.88$ of 1968 and $4.49{\pm}3.69$ of 1978, there is a considerable increase. I) The average number of decayed(D) teeth was $1.14{\pm}1.63$, which decreased from $1.16{\pm}1.57$ of 1968 and $2.09{\pm}2.16$ of 1978. II) The average number of missing(M) teeth was $0.23{\pm}0.73$, which also decreased from $0.69{\pm}1.11$ of 1968 and $0.32{\pm}0.79$ of 1978. III) The average number of filled(F) teeth was $4.39{\pm}4.91$, which increased from $2.38{\pm}3.33$ of 1968 and $2.09{\pm}3.17$ of 1978. 5. According to the analysis of filling material, filling baby including amalgam, gold inlay, resin, silicate cement and paladium inlay was 90.5%, which increased in comparison to 72.8% of 1968 and 83.6% of 1978. Among them, amalgam occupied 62.93%, which showed the most increase. On the other hand, crown and bridge was 6.5%, 3.0%, respectively, which showed continuous decrease from 12.1%, 15.1% of 1968 and 8.7%, 7.7% of 1978. Therefore, the prosthodontic treatment reduced due to the decrease of tooth extraction. In contrast, there is continuous increase of conservative treatment which maintaining natural tooth.

• KSBB Journal
• /
• 제10권4호
• /
• pp.349-356
• /
• 1995

하수처리장의 활생오니를 분리원으로 하여 수십종의 PHA 생산균을 분리하였다. 일반적으로 hy­d droxyvalerate monomer unit의 전구물질로 알려져 있지않은 glucose로부터 비교적 많은 PHA를 생산 하는 균주를 공시균으로 선정하여 형태학척, 배양적, 생리학적 제 특성을 검토한 결과 Pseudomonas 속으 로 통정되었다. 균체 생육을 위한 최적 배양온도 벚 배양 pH는 각각 $37^{\circ}C$와 7.0이었으며, 최적 탄소원 으로셔 glucose 1 %, 최적 질소원으로서 $(NH_4)_2SO_4$ 0.2%, K1HPO. 0.3%, $KH_2PO_4$ 0.45% 였다. 최적 P PHA 생산조건을 조사하기 위하여 2단계 배양법을 이용하였다 PHA 생산은 배지성분중 $NH_4, O_4$, Mg가 결핍되 였을 때 향상되었고, 그중 $NH_4$, 의 결핍시 PHA 축적률과 HV monomer의 함량이 가장 높았다. C/N molar ratio 95.2에서 PHA 축적률이 가장 높았다. 공시균주 Pseudomonas sp. HJ는 alkane, alkanoic acid, alcohol을 탄소원으로 하여 P PHB/HV를 생산하였다. PHA의 생산량과 HV monomer의 함량은 이용된 기질에 따라 다양하였으며, 특히 hexadecane와 propiOnate를 탄소원으로 하였을 때 PHA중의 HV monomer의 함량이 49~74mol %로 매우 높았다. IH-NMR로셔 공시균으로 부터 분리정제된 PHA의 조성을 분석한 결과 PHB/ H HV copolymer임을 알 수 였였다

• 재활복지공학회논문지
• /
• 제7권1호
• /
• pp.29-37
• /
• 2013

본 연구는 문헌조사와 인터넷 자료검색을 통해 국내외 장애인 복지차 시장현황에 대한 잠재수요를 파악하고, 장애유형을 따른 복지차 사용 용도별 국내외 기술현황을 통해 한국형 장애인 복지차 발전 로드맵을 제시하고자 한다. 연구결과는 다음과 같다. 첫째, 장애인 복지차 관련 기술 개발 뿐만 아니라 장애인 자동차의 안전기준 역시 아직 선진국에 비해 미약한 상황이다. 일본, 미국 등과 같이 장애인 복지차 관련 설치, 규격, 기능 및 안전에 대한 기준 및 제도를 마련되어야 할 것이다. 둘째, 미국의 ADA법, 영국의 장애인 차별 금지법, 일본의 Barrier Free법과 같이 장애인에게 지원에 관해 포괄적인 법의 효력을 가짐으로써, 장애인들의 여행과 교통, 고용 기회, 교육, 차량 개조 지원금 등 복지증진하기 위한 조치가 증대됨에 따라 장애인 개조 차량이 더욱 더 늘어난 것으로 나타났다. 셋째, 국내외 복지차 시장현황과 수요예측에 대한 비교분석을 통해 장애인 개조 차량구입과 밀접한 요소로써, 가장 주목해야 할 점은 장애인 고용율과 월평균 소득이 중요한 것으로 나타났다. 이를 위해 정부 각 부처 및 산업전반에 걸쳐 현 장애인 복지법 하위법령개정이나 장애인 복지차 관련법 세부 안전지침에 대한 특별법 제정을 통하여 포괄적인 협력이 필요할 것으로 사료된다. 향후 국내 장애인 복지차 관련 제도/사회 등의 변화를 통해 연간 1만대 이상 복지차 수요가 예상될 것이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.26.1-26.10
• /
• 2017

Background: The impairment of the appearance is a major problem for patients with carcinomas of the oral cavity. These patients want to recover their preoperative facial appearance. Some do not realize that this is not always possible and hence develop a desire for further cosmetic and reconstructive surgery (CRS) which often causes psychological problems. Method: The desire of patients for CRS (N = 410; 26%) has been acquired in this $D{\ddot{O}}SAK$ rehab study including multiple reasons such as medical, functional, aesthetic and psychosocial aspects. They relate to the parameters of diagnosis, treatment and postoperative rehabilitation. Patients without the wish for CRS (N = 1155; 74%) served as control group. For the surgeons, knowledge of the patient's views is relevant in the wish for CRS. Nevertheless, it has hardly been investigated for patients postoperatively to complete resection of oral cancer. In this retrospective cross-sectional study, questionnaires with 147 variables were completed during control appointments. Thirty-eight departments of Oral and Maxillofacial Surgery took part, and 1652 German patients at least 6 months after complete cancer resection answered the questions. Additionally, a physician's questionnaire (N = 1489) was available. Statistical analysis was performed with SPSS vers. 22. Results: The patient's assessment of their appearance and scarring are the most important criteria resulting in wishes for CRS. Furthermore, functional limitations such as eating/swallowing, pain of the facial muscles, numb regions in the operating field, dealing with the social environment, return to work, tumour size and location, removal and reconstruction are closely related. Conclusion: The wish for CRS depends on diverse functional psychosocial and psychological parameters. Hence, it has to be issued during conversation to improve rehabilitation. A decision on the medical treatment can be of greater satisfaction if the surgeon knows the patients' needs and is able to compare them with the medical capabilities. The informed consent between doctor and patient in regard to these findings is necessary.

• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.559-565
• /
• 2003

An analytical method the determination of benzo(a)pyrene (BaP) and its hydroxylated metabolites, 1-hydroxybenzo(a)pyrene (1-OHBaP), 3-hydroxybenzo(a)pyrene (3-OHBaP), benzo(a)pyrene-4,5-dihydrodiol (4,5-diolBaP) and benzo(a)pyrene-7,8-dihydrodiol (7,8-diolBaP), in rat urine and plasma has been developed by HPLC/FLD and GC/MS. The derivatization with alkyl iodide was employed to improve the resolution and the detection of two mono hydroxylated metabolites, 1-OHBaP and 3-OHBaP, in LC and GC. BaP and its four metabolites in spiked urine were successfully separated by gradient elution on reverse phase ODS $C_{18}$ column (4.6 mm I.D., 100 mm length, particle size 5 ㎛) using a binary mixture of MeOH/H₂O (85/15, v/v) as mobile phase after ethylation at 90 ℃ for 10 min. The extraction recoveries of BaP and its metabolites in spiked samples with liquid-liquid extraction, which was better than solid phase extraction, were in the range of 90.3- 101.6% in n-hexane for urine and 95.7-106.3% in acetone for plasma, respectively. The calibration curves has shown good linearity with the correlation coefficients (R²) varying from 0.992 to 1.000 for urine and from 0.996 to 1.000 for plasma, respectively. The detection limits of all analytes were obtained in the range of 0.01-0.1 ng/mL for urine and 0.1-0.4 ng/mL for plasma, respectively. The metabolites of BaP were excreted as mono hydroxy and dihydrodiol forms after intraperitoneal injection of 20 mg/kg of BaP to rats. The total amounts of BaP and four metabolites excreted in dosed rat urine were 3.79 ng over the 0-96 hr period from adminstration and the excretional recovery was less than 0.065% of the injection amounts of BaP. The proposed method was successfully applied to the determination of BaP and its hydroxylated metabolites in rat urine and plasma for the pharmacokinetic studies.

• Journal of Ginseng Research
• /
• 제41권3호
• /
• pp.392-402
• /
• 2017

Background: Previously, we reported that Korean Red Ginseng inhibited liver fibrosis in mice and reduced the expressions of fibrogenic genes in hepatic stellate cells (HSCs). The present study was undertaken to identify the major ginsenoside responsible for reducing the numbers of HSCs and the underlying mechanism involved. Methods: Using LX-2 cells (a human immortalized HSC line) and primary activated HSCs, MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide) assays were conducted to examine the cytotoxic effects of ginsenosides. $H_2O_2$ productions, glutathione contents, lactate dehydrogenase activities, mitochondrial membrane permeabilities, apoptotic cell subpopulations, caspase-3/-7 activities, transferase dUTP nick end labeling (TUNEL) staining, and immunoblot analysis were performed to elucidate the molecular mechanism responsible for ginsenoside-mediated cytotoxicity. Involvement of the AMP-activated protein kinase (AMPK)-related signaling pathway was examined using a chemical inhibitor and small interfering RNA (siRNA) transfection. Results and conclusion: Of the 11 ginsenosides tested, 20S-protopanaxadiol (PPD) showed the most potent cytotoxic activity in both LX-2 cells and primary activated HSCs. Oxidative stress-mediated apoptosis induced by 20S-PPD was blocked by N-acetyl-$\text\tiny L$-cysteine pretreatment. In addition, 20S-PPD concentration-dependently increased the phosphorylation of AMPK, and compound C prevented 20S-PPD-induced cytotoxicity and mitochondrial dysfunction. Moreover, 20S-PPD increased the phosphorylation of liver kinase B1 (LKB1), an upstream kinase of AMPK. Likewise, transfection of LX-2 cells with LKB1 siRNA reduced the cytotoxic effect of 20S-PPD. Thus, 20S-PPD appears to induce HSC apoptosis by activating LKB1-AMPK and to be a therapeutic candidate for the prevention or treatment of liver fibrosis.