본 연구에서는 기존콘크리트와의 부착성능 및 수밀성을 향상하기 위해 기존의 현장에서 사용하는 초속경 시멘트에 PVA 분말수지, 나일론 섬유를 혼입한 보수재료를 개발하고 개발된 보수재료로 보수된 흄관의 보수 후 휨거동 평가를 수행하였다. 주요 실험변수는 PVA 분말수지, 나일론 섬유 혼입률 및 손상유형이며, 성능 실험으로는 압축강도와 보수재료 후 휨거동평가를 수행하였으며 개발된 보수재료는 PVA 분말수지 혼입량이 증가할수록 압축강도가 감소하는 경향이 나타났으며, 모든 배합에서 보수재료의 요구 성능을 충분히 만족하는 것으로 나타났다. 보수된 관 시험체들의 휨강도 실험결과, 나일론 섬유를 혼입하고 PVA분말을 적정량을 첨가하여야 보수재료의 성능이 최대가 되는 것으로 나타났다. 모든 시험체들의 휨거동은 다소 철근비가 작은 구조부재에서 나타나는 휨거동 양상을 보이는 것으로 나타나, 국내의 흄관에 배근되는 철선량이 다소 부족함을 추정할 수 있었다. 즉, 철선의 배근량이 다소 적어 콘크리트와 철선의 거동이 극한상태에 도달하기 전에 콘크리트에 균열이 발생되고 곧바로 콘크리트의 인장강도를 초과하여 파괴되는 것을 확인할 수 있었다.
In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.
핫멜트 접착제는 최근 대두되고 있는 환경적인 요구사항들을 충족시킬 수 있는 무용제형이고 접착공정의 자동화가 가능하기 때문에 널리 사용되고 있다. 본 연구에서는 핫멜트 접착제의 기본 수지로서 폴리아미드 단일중합체 대신 나일론 6, 나일론 66, 나일론 12로 이루어진 CM831(랜덤중합체)과 843P(블록중합체) 형의 두 종류 수지를 사용하여 핫멜트 접착제를 제조하였다. 결과에 의하면 접착제 자체 강인성을 크게 손상하지 않는 범위에서 가능한 한 낮은 용융점도를 갖는 조건은 CM831/843P 수지 블랜딩 비율이 약 75/25~50/50임을 알 수 있었다. 접착성 향상과 더불어 피착제와의 젖음 특성 향상을 위해 점착부여 수지로 테르펜 수지를 사용하였다. 테르펜 수지는 약 10 wt.% 첨가되었을때 현 시스템의 용융온도와 용융점도를 감소시키고, 접착제 자체 강인성은 증가시키는 접착제 측면에서 바람직한 결과를 나타냈다. 또한 접착제의 유변학적 특성도 전형적인 비뉴턴 거동으로부터 테르펜수지 첨가로 인해 뉴턴 거동에 가까워졌다.
나일론66/유리섬유 복합체의 경우 $300^{\circ}C$ 이상의 고온에서 사출가공 될 때 물성 저하가 일어날 수 있어, 재이용시 열이력에 대한 체계적인 연구가 필요하다. $305/290/273/268/265/260^{\circ}C$ 온도조건의 이축압출기(twin screw extruder)를 이용하여 나일론66/유리섬유 복합체의 압출시료를 압출횟수에 따라 제조하였다. 압출횟수에 따른 화학구조, 열적특성, 용융지수, 결정구조, 아이조드 충격강도 및 유변학적 특성을 FT-IR, 용융지수 측정기, DSC, TGA, XRD, Izod 시험기, 그리고 유변물성 측정기를 이용하여 분석하였다. 적외선분광 스펙트럼을 이용하여 확인한 결과 압출횟수에 따른 압출시편에서의 화학구조 변화는 확인되지 않았다. 압출횟수에 따라 분자량이 감소하는 것을 용융지수와 복소점도를 이용하여 확인하였다. 나일론66/유리섬유 복합체의 용융온도는 큰 변화가 없으나, 압출횟수 증가에 따라 분해온도가 $20^{\circ}C$ 정도까지 감소하는 것을 DSC와 TGA를 이용하여 확인하였다. 압출시편의 아이조드 충격강도는 압출횟수가 증가함에 따라 감소하였다. 또한 나일론66/유리섬유 복합체 압출시편의 G'-G" 곡선의 기울기나 형태가 변하지 않는 것으로부터 압출시편에 가교와 같은 구조변화가 크게 나타나지 않음을 알 수 있었다.
이 연구의 목적은 에틸렌이민 유도체를 갖는 아조계 분산 염료의 나일론 6.6 섬유에의 응용과 최적화된 폴리에스테르 및 나이론 극세사 섬유 염색 조건의 확립이다. 세가지 아지리디닐 모노 아조 염료와 이들 염료의 가수분해 된 형태 그리고 디메틸아닐린계 아조 염료의 폴리에스테르 및 나일론 6.6 극세사 섬유에 대한 염색 및 견뢰도 성질이 조사되었다. 염색 조건 중 pH의 변화에 따른 섬유상의 염착량 변화 조사에서 뚜렷한 경향을 얻을 수 없었으며, 이는 극세사 섬유의 물리적 성질이 두드러지게 착용한 이유라 여겨진다. 염색된 폴리에스테르 극세사 섬유상에서, 아지리디닐 염료는 이들의 가수 분해된 형태 그리고 디메틸아닐린계 아조 염료의 비교하여 개선된 견뢰도 성질을 나타내었다. 아지리디닐 아조 염료의 나일론 극세사 섬유 염색 시 pH 증가에 따라 세탁 및 광견뢰도가 개선되었고, pH8의 염색 조건에서 최적 견뢰도 개선을 나타내었다. 아지리디닐 아조 염료가 이들 염료의 가수분해 된 형태 그리고 디메틸아닐린계 아조 염료와 비교하여 폴리에스테르 및 나일론 섬유상에서 보다 개선된 견뢰도 성질을 나타내었고 이는 섬유와 염료간의 공유 결합으로 기인한 것으로 여겨진다.
Today, great percentage of apparel fabrics comprise knit products. A few apparel items are almost exclusively made from knit products including sweaters, T-shirts, lingerie, and hosiery. In weft knits, intermeshing yarn traverses the fabric crosswise. The production rate of knitting machines is about four times higher than that of conventional looms iin proportion to the amount of fabric produced per unit time. Knit apparels fabrics are noted for freedom of body movement, easy-care, resilience, soft draping and quality. The appearance of fabrics is of prime importance along with tactile features such as smoothness, crispness, stiffness when we deal with the handling evaluation of the textiles. In practice, the quality and performance of fabrics judged by sighted evaluators, and it is perhaps logical, in attempting to establish an effective fabric objective measurement system. It is worthwhile to make objective measurement that correlate well with subjective evaluations made by sight and touch together. However, it often imposes difficulties to effectively measure and analyze the appearance or optical properties of the textile surface features. In this study, an attempt is made to provide a preliminary approach to the analysis of the gloss property, which is one of the optical properties of fabrics. The specimens range from 70/24 nylon 6 filament yarn knit fabric to 70/68 nylon 6 filament yarn knit fabric, the latter being finer. A few three-dimensional models based on Peirce's model of knit stitch have been proposed and material properties were given to calculate the properties. Goniophotometric measurements of the specimens were also carried out.
본 연구는 바지락이 흔들림 스트레스에 노출될 경우 나타나는 생리적 변화를 측정하기 위하여 일산화질소량 (NO) 을 측정하였다. 이를 위하여 흔들림 방지 장치가 없는 그룹, NAME (NO 저해제) 를 주사한 그룹, 나일론 섬유 충전재(밀도 $1kg/m^3$) 로 흔들림이 방지된 그룹 등 총 3개 그룹으로 나눈 후 교반기에서 100 rpm으로 6시간동안 교반 한 후 DAF assay와 Griess assay를 이용하여 바지락 혈림프액의 NO 농도를 측정하였다. 조사결과 흔들림 스트레스에 노출된 바지락에서 NO 농도가 급격히 증가하였고 반면 NO 저해제가 주입된 바지락에서는 NO 농도가 감소하였다. 또한 흔들림 방지 장치가 들어간 그룹에서 NO 농도가 감소함이 확인되었다. 이러한 결과는 DAF assay와 Griess assay 실험에서 모두 동일하게 나타났다. 결론적으로 NO 측정은 바지락의 생리적 스트레스를 측정하는데 유용한 방법임이 확인되었으며, 형망에 의한 바지락 채취시나 수하식으로 양식할 경우 흔들림에 의한 스트레스를 방지할 수단이 필요함을 시사하였다.
Alloys of nylon(PA6) and ethylene-propylene-diene polymer, modified with maleic anhydride(MEPDM) were prepared using a melt kneading process. This study focuses on the effects of the content of MEPDM in PA6 blend on the mechanical and thermal properties of such blends where MEPDM is the dispersed phase. Mechanical properties were examined by stress-strain measurements and impact strength test. Both impact strength of PA6/MEPDM at room temperature and at $-20^{\circ}C$ were improved up to 400-550% with the amounts of MEPDM. However, PA6/MEPDM containing 3-5 wt% of MEPDM showed the about $700kg_f/m^2$ of the maximum tensile strength but 8.5 % of the lowest elongation. For certain compositions of PA6 with rubbery MEPDM, the interesting reduction of elongation is caused by the reaction of the polyamide amine end groups with maleic anhydride portion in MEPDM, that provided a reinforcement in the PA6 matrix. In addition, the introduction of antistatic agent on the surface of alloys causes significant reduction of their surface electrostatic resistance.
순환골재는 다량의 부착모르타르를 포함하고 있어 콘크리트의 강도감소, 내구성 저하, 균열발생의 원인이 되기도 한다. 본 연구에서는 보통포틀랜드시멘트(OPC)에 고로슬래그미분말(GGBFS)을 0 및 50% 대체한 순환 굵은골재 콘크리트의 역학적 특성 및 내구성에 대한 나일론섬유의 영향에 대하여 실험적으로 고찰하였다. 섬유보강 순환골재 콘크리트를 제조하기 위하여 섬유길이가 상이한 두 종류 나일론섬유를 0 및 $0.6kg/m^3$ 두 단계로 혼입하여 소정의 재령동안 수중양생하였다. 제조된 콘크리트의 압축 및 쪼갬 인장강도, 투수공극량 및 총통과전하량을 측정하여 섬유보강 부순골재 콘크리트의 성능과 비교, 고찰하였다. 또, 재령 28일 콘크리트를 대상으로 SEM 기법을 이용하여 미세조직구조를 관찰하였다. 실험결과에 따르면, 순환골재 콘크리트는 부순골재 콘크리트에 비하여 역학적 성능 및 내구성이 떨어지는 것을 확인하였으나, 나일론섬유를 혼입할 경우, 나일론 섬유의 가교작용으로 인하여 콘크리트의 성능을 개선시키는 것으로 나타났다. 특히, NF2(19 mm)를 사용한 콘크리트는 NF1(6 mm)을 사용한 콘크리트보다 역학적 성능이 다소 우수한 것으로 나타났으며, 이러한 경향은 RA 콘크리트에서 더욱 뚜렷하게 나타났다.
The tensile properties of short nylon6 fiber reinforced NR and SBR have been investigated as functions of diameter ratio(DR), interphase condition, fiber aspect ratio(AR), and fiber content. The short-fiber(DR=3 and AR=2) reinforced SBR did not show the dilution effect for all interphase conditions. And the short-fiber(DR=3 and AR=2) reinforced NR did not show the dilution effect except for the no-coating. The better interphase condition, the lower dilution effect at same DR. The tensile moduli are significantly improved due to fiber content and diameter ratio at same interphase condition. The pull-out force increased with the DR. The better interphase condition, the higher pull-out force at same DR. It is found that the DR and AR have an important effect on tensile properties.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.