• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.344-349
• /
• 2009

Optimum dyeing conditions of green tea extracts were investigated toward nylon, cotton, rayon, and tencel fabrics. Affinity of green tea extracts was exhibited much higher onto nylon fabric than the other cellulosics. As for nylon, the adsorption was increased with the increase of dyeing temperature and optimum dyeing pH was around 4~6. Buildup property of green tea extract was good showing a linear relationship between concentration of the extracts and color strength of dyed fabrics within experimental range. Color fastnesses were good to excellent in general except to light.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.1-6
• /
• 1997

Water repellent finish was carried out using water repellent agent(AG-480), melamine resin(Sumitex Resin MK), and catalyst(Sumitex Accelerator ACX). PET/nylon fabrics were treated with melamine resin by pad-dry-cure method and subsequently washed and dried. Durable water repellency was controlled by the melamine resin and catalyst. Water repellency was tested by spray rating method and durability of water repellency were measured by launder-O-meter and pilling tester. The optimum conditions of durable water repellent finish for new synthetic fabric were as follows; concentration of water repellent finishing agent 20g/l; concentration of melamine & catalyst 0.5g/l; curing condition $160^{\circ}$ ${\times}$ 30sec. Water repellency after washing and rubbing is improved by melamine resin and catalyst.

• Journal of Fashion Business
• /
• v.7 no.6
• /
• pp.50-56
• /
• 2003

Chitosan has been widely applied to the products in various industries such as textile fabrics, apparels, foods, medical area, etc. Cochineal has long been employed as one of natural dyestuffs in the textile industry. The effect of chitosan pre-treatment on the low-stress physical and mechanical properties of cochineal-dyed fabrics including cotton, silk, nylon and polyester fabrics was investigated in this study. The chitosan treatment and mordanting of the fabrics changed the bending, shear, compression, and surface properties of the fabrics. In cotton fabric specimens, while the increase of B(bending rigidity) of cotton is relatively high, the increase of G(shear rigidity) of cotton is relatively low. In nylon and PET fabric specimens, while the increase tendency of B is relatively low, that of G is high compared to the corresponding cotton fabrics.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.112-116
• /
• 2006

Caprolactam is the most important raw material for making Nylon 6 fibers and its quality directly determines the quality of Nylon. So it is necessary to study the techniques and methods to remove the colorful impurities from caprolactam. In this paper, the decolorization of caprolactam aqueous solution by anion exchange resins was studied and the decoloring abilities of five commercial resins were investigated. The regeneration of the resins was also studied, too. This study shows that the resin AMTX202 have excellent decoloring ability in the column experiment and that the decoloring efficiency is correlated with the volume of resins packed and is slightly affected by the flow rate and regenerating times. The fact that the resins can be regenerated and reused without affecting the efficiency of decolorization will decrease the cost of the treatment and operation in the industry. The adsorption of colored compounds with anion exchange resins in the packed columns seems to be technically feasible.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.1-6
• /
• 2021

The non-explosive holding and release mechanism is used to prevent damage to the mission component caused by explosives when the deployment structure for Cube Satellites is separated. However, among the several types available, the non-explosive holding and release mechanism system using nylon wires depend on the nylon wire knot method and tightening power of the worker. Therefore, in this study, we conducted experiments with the operation of a new holding and release mechanism system by conceptualizing the Boa System Dial, which can provide a constant tightening force regardless of worker proficiency and deploying a imitational solar panel. In this study, the process of binding and unbinding with constant tension was recorded while applying the novel non-explosive holding and release mechanism using the Boa System Dial proposed. In addition, required advances are indicated for the application of the proposed system to actual Cube Satellites.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.238-246
• /
• 2001

Properties of ternary blends of nylon 6 (Ny6), a thermotropic liquid crystalline polymer (TLCP, poly(ester amide), 20 wt%) and a maleic anhydride grafted polypropylene (2 wt%) (MAPP) were studied under various processing conditions. TLCP was pre-blended with MAPP first and then the binary one blended again with Ny6. The processing temperature of the second mixing was varied. Thermal properties show the partial miscibility of the ternary blend. The morphology of the TLCP phase in the first blending shows mostly in the fibril bundle shape, but varies between droplets and oriented fibrils after the second processing. Some of TLCP phase lost the fibril morphology during the second processing stage. The morphology variation invokes the change in tensile properties. Low extrusion temperature (270$\^{C}$) provides more fibril shapes, which are associated with less deformation in the second stage. The processing temperature effect was more evident when the draw ratio was high. High drawing was applicable due to the stabilizing action of tile compatibilizer.

• Korean Journal of Veterinary Research
• /
• v.31 no.1
• /
• pp.71-75
• /
• 1991

This study was undertaken to identify the distribution of T and B lymphocytes in bovine peripheral blood and various lymphoid tissues by the method of ABPC using RABTS, $BLT_1$ and $_6E_{12}$ as primary antibodies. RABTS, $BLT_1$ and $_6E_{12}$ positive cells in PB-MNCs were 70.9${\pm}5.5%$, $59.0{\pm}8.7%$ and $23.0{\pm}8.7%$, respectively. $BLT_1$ and $_6E_{12}$ positive cells in nylon wool nonadherent cells of PB-MNCs were $91.6{\pm}1.0%$ and $9.6{\pm}0.8%$, respectively. In the lymphoid tissues such as inguinal lymph node, mesenteric lymph node, spleen and thymus, positive cells of RABTS were $76.3{\pm}3.4%$, $74.2{\pm}8.2%$, $73.6{\pm}5.5%$ and $95.6{\pm}2.8%$, those of $BLT_1$ were $56.4{\pm}6.2%$, $55.6{\pm}7.7%$, $48.6{\pm}5.1%$ and $23.0{\pm}4.8%$ and those of $_6E_{12}$ were $45.3{\pm}7.4%$, $42.3{\pm}5.8%$, $48.5{\pm}6.2%$ and $5.6{\pm}2.1%$, in order. These results are indicating that nylon wool column method is effective for separation of bovine ocytes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.814-821
• /
• 2015

The purpose of this study is to estimate crack reduction properties of covering concrete with fibers in basement. Air contents, slump, compressive strength, tensile strength and plastic shrinkage has been tested to conduct the optimum addition ratio and type of fiber. The results is a following. For the properties of air contents, all of the specimens added fibers shown the higher than plain concrete. For the flowability, slump decreased about 40-80% when all of the specimens added fibers. For the strength properties, the specimens added nylon fiber shown higher compressive and tensile strength about 5-15% comparing with other concrete. For the plastic shrinkage, cracking decreased when the fiber added comparing with plain concrete. Especially, when nylon fiber added in the concrete, the plastic shrinkage did not occurred. For the overall consideration, when the addition ratio of nylon fiber is 0.6%, the press concrete is identified as showed optimum properties.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.194-202
• /
• 1996

Hot melt adhesive based on the polyamide resin was studied to improve the conventional hot melt adhesives such as ethylene-vinyl acetate which have inherent problems against creep and heat resistance. It was found that the terpolymer of nylons6, nylon66, and nylon12 or the nylon blend instead of nylon homopolymer was suitable base resin for hot melt adhesives, since the disruption of regularity in the polymer chains reduced the crystallinity, resulting in lower melting point and melt viscosity. Also, the rheological properties of the polyamide based hot melt adhesive could be controlled by the incorporation of terpene resin, butyl benzyl phthalate, and paraffin wax. The results of melt viscosities and tensile properties of adhesive itself indicated that the optimum adhesion properties could be obtained through the blending of CM831/843P resins with weight ratio 75/25~50/50. The adhesion between steel and steel was tested by using lap shear geometry. It was found that the surface roughness of steel affected the adhesion strength.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1075-1081
• /
• 1997

The objective of this research was to develop a glutamate enzyme sensor for rapid determinations of glutamate in samples. Glutamate oxidase was immobilized onto activated nylon, chitosan and other membranes. The enzymic and nonactin membranes were attached to an ammonia electrode to detect ammonia generated by the reaction between glutamate oxidase and glutamate. The enzyme immobilized on activated nylon membrane was stable for 2 months, and was able to perform about 250 glutamate determinations without losing activities. The enzyme immobilized on chitosan membrane had higher enzyme activity, but was not as much stable as that immobilized on nylon. The glutamate biosensor was able to accurately determine $0.1{\sim}5\;mM$ of glutamate in samples.