• Journal of Biosystems Engineering
• /
• v.16 no.2
• /
• pp.178-187
• /
• 1991

In order to provide fundamental data for the achievement of safe environmental condition, investigation of the actual state of the nutriculture practices in Korea was carried out. The result obtained are summarized as follows. 1. Cultivation area of nutriculture was 6 ha and culture types included deep flow technique(43%), nutrient film technique(45%), gravel culture(6%), chaff charcoal culture(3%) and rockwool culture(3%). 2. Greenhouses were mostly made of pentite pipe frames and covered by polyethylene film, and culture beds were handy combination of cement blocks, concrete and styrofoam, which were not standard products. 3. Development of nutriculture system appropriate to our actual circumstances and improvement of establishments are required. 4. Since there was not farmhouse that performs the environmental measurement and environmental conditions of cultivation were very limited. sensor applied environmental control technology of nutriculture should be developed.

• Journal of Biosystems Engineering
• /
• v.23 no.2
• /
• pp.167-178
• /
• 1998

An Aero-NFT nutriculture system using microcomputer for cultivation of greenhouse melon was developed and the performance of the system was evaluated through experiments. The system could control temperature, EC and pH of the nutrient solution within the error ranges of $\pm$ 0.2$^{\circ}C$, $\pm$ 0.2 mS/cm, $\pm$ 0.1 pH, respectively. The results of cultivation experiment showed that temperature, EC and pH of the nutrient solution were generally controlled within the setting ranges during cultivation period. The growth results were good until pinching, but the fruit quality of melons was not high except sweetness and shape. To optimize performance of the system, more techlical information for nutriculture of greenhouse melon was needed.

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.11-19
• /
• 2000

In recent, multi-sector nutriculture in which each sectors are managed with different compositions and supplying amounts of nutrient solution is being prevalent especially in large-scale greenhouses. This study was carried out to develop an automatic mixing and supplying system of nutrient solution for the multi-sector greenhouse which can control various compositions of nutrient solution and supplying amounts for each sector. The stock solution control device could control discharge of the stock solution with device actuating time. The experimental result showed high correlation between the discharge and the actuating time. The system could make nutrient solution of various compositions and showed possibility of changing compositions of nutrient solution according to changes of growth stages or environments. Undesirable remnant nutrient-solution effect on the next supply was decreased by lowering RC of the previous nutrient solution remaining in the tank and supply pipe through rinse process. To evaluate performance of the developed system, experiments that compare N $O_3$$^{[-10]}$ , and P $O_4$$^{3-}$ concentrations of nutrient solution made in laboratory level with those made by the developed system were conducted. The experimental results showed that the deviations for N $O_3$$^{[-10]}$ , and P $O_4$$^{3-}$ concentrations of nutrient solution composited by the developed system were -2.36％ and -5.15％, respectively.

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.7-14
• /
• 1996

This experiment was carried out to investigate the growth and yield responses of hydroponically grown tomato as affected by the different substrates using perlite and mixtures with perlite. Substrates used in this experiment were perlite (fine and coarse granule), peatmoss, rice hull and carbonized rice hull. The results obtained were as follows ; The best results in terms of total fruit yield and average fruit weight obtained in the single treatment of perlite, followed by perlite mixture with rice hull and carbonized rice hull. Leaf area was also higher in the plots of perlite mixture and optimum mixing ratio of perlite, peatmoss and carbonized rice hull was determined as 5:3:2 by volume. The more the rice hull was added to the mixed substrates, the less in fruit production was observed. However, adding perlite to other substrates brought higher fruit yield. Single treatment of rice hull showed the lowest fruit yield but enhanced in soluble solids contents over 6.0 $^{\circ}$Brix at each cluster.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.67-73
• /
• 2009

This study was conducted to establish a strategy to improve the grafted cacti export which has been stagnated in these year. To promote its exporting, first of all, Korean cactus producer needs to save the cost of labor by using bottom nutriculture system for the greater national competitiveness. Second, it is desired to diversify the export cactus items such as a new variety of Epiphyllum truncatum, big size of perfect brand, a finished package production to satisfy foreigner's demand coping with international market change of grafted cacti. On the other hand, Korean cultivar protection and national negotiation for a reducing tariff rate or an efficient plant inspection system are also needed.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2011

This study was carried out to investigate the effects of several cooling methods such as water hose cooling, mist, fog and control on growth and microclimate, and to develop a simple nutriculture bed for production of fresh leaves of narrowhead goldenaray 'Ligularia stenocephala'. When the root-zone was cooled with 240 L/hr flow rate of $13^{\circ}C$ ground water using water hose, the temperature was lowered approximately by 2 to $3^{\circ}C$ than that of control. The growth of narrowhead goldenaray were favorable in the water hose cooling compared with the other cooling methods. Nutrient culture system having part cooling effect around plant canopy was developed. The system was composed of 15 cm diameter of water hose on side wall of beds, cooling hose, and expanded rice hull media as organic substrate. When cool water which the temperature changed in the range of 14 to $22^{\circ}C$ diurnally with 240 L/hr of flow rate through water hose, the air temperature around canopy and root-zone temperature were dropped by $0.5^{\circ}C$ and $3^{\circ}C$ compared with that of conventional styrofoam bed, respectively. These results showed that newly devised bed system using water hose was simple and economical for the production of high quality narrowhead goldenaray leaves. This system might be practically used both at summer and winter season for the cultivation of narrow head goldenaray by part cooling or heating around root-zone and plant canopy.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.3
• /
• pp.198-206
• /
• 2016

Background: Electrical conductivity (EC) and pH are important features of nutrient solution, affecting both growth and quality of crops by altering nutrient uptake. Methods and Results: The pH values of nutrient solutions were controlled at 5.0, 5.5, 6.0, 6.5 and EC values were controlled at 0.68, 0.84, 1.23, 1.41 dS/m. Gingesng root weights were higher during the initial growth period when the plants were treated with low pH and low EC nutrient solutions. However, the higher pH and EC levels, the greater the increase in the rate of root weight between the initial and middle growth periods. The highest ginsenoside amount changed during growth period. The total ginsenoside amount was highest in the root, and the lowest in leaves at 45 and 90 days after treatment, respectively, with solution at a pH of 6.0. After 135 days of treatment, the highest total ginsenoside amount was detected in root treated with soluton with EC values of 1.23 dS/m. Conclusions: For the cultivation of ginseng using a nutriculture system, the pH and EC values of nutrient solutions should to be controlled based on the stage of growth and targeted plant organ (root or leaves).

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.169-174
• /
• 1992

This experiment was carried out to investigate the possibility of practical use of intermittent soaking system(ISS) in hydroponicaly growing tomato. There were four treatments which were NFT, Aeroponics, and ISS with 10 and 15 minute soaking intervals. 1. Plant height is highest in NFT, but main root length is longest in ISS. While stem diameter and leaf number were not significantly difference. 2. Fresh and dry weight were heavier in NFT than those of other systems at early growth stage, but the heavier in ISS system, the growth more develop. 3. In 43 days after treatment, the number of flowerlet was largest in aeroponics, and then ISS and NFT in order. Fruit weight per plant was also heaviest in aeroponics. 4. Average yield per plant were 1929.1g in aeroponics, 1475.2g in ISS with 10 minute soaking interval, 1276.2g in NFT and 1084.8g in ISS with 15 minute soaking interval. 5. Average fruit number per plant were 11.0 in aeroponics, 9.7 in NFT, 8.3 in ISS with 15 minute soaking interval, and 7.7 in ISS with 10 minute soaking interval. Average fruit weight were 192.9g in aeroponics, 172.4g in ISS with 10 minute soaking interval, 134.0g in NFT and 126.0g in ISS with 15 minute soaking interval. 6. Average fruit length was longer in aeroponics and ISS with 10 minute soaking interval than in the NFT and ISS with 15 minute soaking interval. Average fruit width was similarly wider in NFT, aeroponics and ISS with 10 minute soaking interval than in ISS with 15 minute soaking interval.