• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.651-657
• /
• 2010

Solute transport through a groove is affected by its vortices. Our laboratory and numerical experiments of dye transport through a single axisymmetric groove reveal evidence of enhanced spreading and mixing by the vortex, i.e., a new kind of dispersion called here the vortex dispersion. The uptake and release of contaminants by vortices in porous media is affected by the flow Reynolds number. The larger the flow Reynolds number, the larger is the vortex dispersion, and the larger is the mass-transfer rate between the mobile zone and the vortex. The long known dependence of the mass-transfer rate between the mobile and "immobile" zones in porous media on flow velocity can be explained by the presence of vortices in the "immobile" zone and their uptake and release of contaminants.

• 한국환경과학회지
• /
• 제2권2호
• /
• pp.103-113
• /
• 1993

The land and sea breeze over the Pusan coastal area is studied by three dimensional mesoscale numerical model. According to the results of the simulation experiments, both Pusan areas and Kimhae areas, the sea breeze began at 0800LST and the strongest at 1500LST and then at 1800LST. After midnight, the sea breeze changed about the land breeze and become weaker than that of the sea breeze in the daytime. Comparisons between calculations and observations showed that the characteristics of diurnal variation and v-component of the wind velocity relatively is similar to the Pusan areas. On the Kimhae areas, however, observations showed time lag which compared to the results of simulation experiments in the velocity of sea breeze and diurnal variation. From the above results, comparisons between calculations and observations is much more similar to the coastal areas than on the inland area.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1284-1291
• /
• 2006

Single phase pressure drops in micro tubes were investigated through an experimental measurement and a numerical simulation. Experimental Po was obtained in circular micro tubes with 87 and $118{\mu}m$ diameter with distilled water. Experiments were carried out in laminar flow region with varying the Re 15-450 for the $87{\mu}m$ diameter tubes and 60-1300 for the $118{\mu}m$ diameter tube. No early transition from laminar to turbulent flow was detected for the experimental range. The computational estimation of pressure drop in the $87{\mu}m$ diameter tube was performed with the aid of CFD software. Boundary conditions from experiments were used for the numerical simulation. The results of experimental and numerical studies showed a good agreement with the conventional macro theory.

• Structural Engineering and Mechanics
• /
• 제13권2호
• /
• pp.117-134
• /
• 2002

This paper presents a computational method for a confidence region of identified parameters which are affected by measurement noise and error contained in prescribed parameters. The method is based on sensitivities of the identified parameters with respect to model parameter error and measurement noise along with the law of error propagation. By conducting numerical experiments on simple models, it is confirmed that the confidence region coincides well with the results of numerical experiments. Furthermore, the optimum arrangement of sensor locations is evaluated when uncertainty exists in prescribed parameters, based on the concept that square sum of coefficients of variations of identified results attains minimum. Good agreement of the theoretical results with those of numerical simulation confirmed validity of the theory.

• Advances in materials Research
• /
• 제8권2호
• /
• pp.75-81
• /
• 2019

Through experimental and numerical studies of metal forming processes by plastic deformation, this paper represents a numerical simulation by finite element of the mechanical behavior of the material during a permanent deformation phenomenon. The main interest of this study is to optimize the shaping processes such as folding. In this context the elastic return for the folding process has been further reduced by using the design of experiments approach. In this analysis, it is proposed to consider the following factors: bending radius, metal-sheet thickness, gap and length of the fold.

• 한국수자원학회논문집
• /
• 제38권8호
• /
• pp.631-643
• /
• 2005

신설될 복합화력발전소 취수펌프장 계획안에 대하여 수치 및 수리모형실험을 수행하고 순환수취수펌프운영에 문제를 발생시킬 가능성이 발견되면 개선안을 도출하는 것이 본 연구의 목적이다. 수리모형은 1:20의 크기로 아크릴을 이용하여 제작되었고 2차원 수치모형실험은 RMA2모형을 이용하였다. 수리 및 수치모형실험의 결과를 평가하기 위하여 취수로 및 취수펌프장내 흐름에 대한 평가기준을 설정하였다. 복합화력발전소 취수펌프장의 계획안에 대한 2차원 수치모형실험을 통하여 얻어진 연직방향 와도를 수리모형실험결과와 비교하여 흐름평가기준의 하나인 와류발생 가능성을 평가하였다. 계획안은 취수펌프장내에서 큰 규모의 와류가 발생하여 순환수취수펌프운영에 문제를 발생시킬 수 있을 것으로 판단되었다. 이에 따라서 9개 개선안이 고안되어 수치모의되었다. 9개중 4개의 개선안에 대하여 수리모형실험이 수행되었다. 수리모형실험에 근거하여 4개의 개선안의 하나가 최종개선안으로 제시되었다. 공간적인 제약조건이 있는 순환수취수펌프장 및 취수로 설계의 경우 격벽과 도류벽을 이용하면 순환수취수펌프장의 흐름상황을 개선할 수 있는 것으로 나타났다.

• Journal of applied mathematics & informatics
• /
• 제22권1_2호
• /
• pp.125-132
• /
• 2006

It is the aim of this paper to introduce the Genocchi numbers Gn and polynomials Gn(x) and to display the shape of Genocchi polynomials Gn(x). Finally, we investigate the roots of the Genocchi polynomials Gn(x).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.700-703
• /
• 2004

A reliability analysis and design procedure based on the design of experiment (DOE) is combined with the response surface method (RSM) for numerical efficiency. The procedure established is based on a 3$^n$ full factorial DOE for numerical quadrature using explicit formula of optimum levels and weights derived for general distributions. The full factorial moment method (FFMM) shows good performance in terms of accuracy and ability to treat non-normally distributed random variables. But, the FFMM becomes very inefficient because the number of function evaluation required increases exponentially as the number of random variables considered increases. To enhance the efficiency, the response surface moment method (RSMM) is proposed. In RSMM, experiments only with high probability are conducted and the rest of data are complemented by a quadratic response surface approximation without mixed terms. The response surface is updated by conducting experiments one by one until the value of failure probability is converged. It is calculated using the Pearson system and the four statistical moments obtained from the experimental data. A measure for checking the relative importance of an experimental point is proposed and named as influence index. During the update of response surface, mixed terms can be added into the formulation.

• Steel and Composite Structures
• /
• 제10권1호
• /
• pp.1-21
• /
• 2010

As an alternative for conventional structures for tall buildings, a hybrid lateral load resisting structure has been designed, enabling the assembly of tall buildings directly from a truck. It consists of steel frames with discretely connected precast concrete infill panels provided with window openings. Besides the stiffening and strengthening effect of the infill panels on the frame structure, economical benefits may be derived from saving costs on materials and labour, and from reducing construction time. In order to develop design rules for this type of structure, the hybrid infilled frame has recently been subjected to experimental and numerical analyses. Ten full-scale tests were performed on one-storey, one-bay, 3 by 3 m infilled frame structures, having different window opening geometries. Subsequently, the response of the full-scale experiments was simulated with the finite element program DIANA. The finite element simulations were performed taking into account non-linear material characteristics and geometrical non-linearity. The experiments show that discretely connected precast concrete panels provided with a window opening, can significantly improve the performance of steel frames. A comparison between the full-scale experiments and simulations shows that the finite element models enable simulating the elastic and plastic behaviour of the hybrid infilled frame.

• 한국해안·해양공학회논문집
• /
• 제24권5호
• /
• pp.366-371
• /
• 2012

너울성고파랑은 최근 동해안에서 발생하는 해안침식의 주 원인 중 하나로 알려져 있다. 본 연구에서는 이와 같은 너울성 고파랑의 내습에 의해 발생되는 백사장 주변의 해빈변형을 재현하고 후빈에 미치는 영향을 확인하기 위해 이동상 수리모형실험과 수치모형실험을 수행하였다. 수치모형실험에서는 CSHORE모형을 이용하여 다양한 내습파랑에 따른 해빈단면변화를 검토하였다. 아울러, 이동상 수리모형실험을 통해 평상파랑과 너울성고파랑의 내습에 의해 발생되는 전빈 및 후빈의 침식현상과 그 메커니즘을 비교 고찰 하였다.