• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.106-116
• /
• 2021

This paper considers a joint problem for blood inventory planning at hospitals and blood delivery planning from blood centers to hospitals, in order to alleviate the blood service imbalance between big and small hospitals being occurred in practice. The joint problem is to determine delivery timing, delivery quantity, delivery means such as medical drones and legacy blood vehicles, and inventory level to minimize inventory and delivery costs while satisfying hospitals' blood demand over a planning horizon. This problem is formulated as a mixed integer programming model by considering practical constraints such as blood lifespan and drone specification. To solve the problem, this paper employs a Lagrangian relaxation technique and suggests a time efficient Lagrangian heuristic algorithm. The performance of the suggested heuristic is evaluated by conducting computational experiments on randomly-generated problem instances, which are generated by mimicking the real data of Korean Red Cross in Seoul and other reliable sources. The results of computational experiments show that the suggested heuristic obtains near-optimal solutions in a shorter amount of time. In addition, we discuss the effect of changes in the length of blood lifespan, the number of planning periods, the number of hospitals, and drone specifications on the performance of the suggested Lagrangian heuristic.

• Journal of Mechanical Science and Technology
• /
• v.15 no.8
• /
• pp.1090-1096
• /
• 2001

In this paper, new methods for efficiently solving linear acceleration equations of multibody dynamic simulation exploiting sparsity for real-time simulation are presented. The coefficient matrix of the equations tends to have a large number of zero entries according to the relative joint coordinate numbering. By adequate joint coordinate numbering, the matrix has minimum off-diagonal terms and a block pattern of non-zero entries and can be solved efficiently. The proposed methods, using sparse Cholesky method and recursive block mass matrix method, take advantages of both the special structure and the sparsity of the coefficient matrix to reduce computation time. The first method solves the η$\times$η sparse coefficient matrix for the accelerations, where η denotes the number of relative coordinates. In the second method, for vehicle dynamic simulation, simple manipulations bring the original problem of dimension η$\times$η to an equivalent problem of dimension 6$\times$6 to be solved for the accelerations of a vehicle chassis. For vehicle dynamic simulation, the proposed solution methods are proved to be more efficient than the classical approaches using reduced Lagrangian multiplier method. With the methods computation time for real-time vehicle dynamic simulation can be reduced up to 14 per cent compared to the classical approach.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.49-55
• /
• 2008

Arc welding process is one of the most important technologies to join metal plates. Robotic welding offers the reduced manufacturing cost sought, but its widespread use demands a means of sensing and correcting for inaccuracies in the part, the fixturing and the robot. A number of problems that need to be addressed in robotic arc welding processes include sensing, joint tracking, and lack of adequate models for process parameter prediction and quality control. Problems with parameter settings and quality control occur frequently in the GMA(Gas Metal Arc) welding process due to the large number of interactive process parameters that must be set and accurately controlled. The objectives of this paper are to realize the mapping characteristics of bead width using a sensitivity analysis and develop the neural network and multiple regression method, and finally select the most accurate model in order to control the weld quality(bead width) for fillet welding. The experimental results show that the proposed neural network estimator can predict bead width with reasonable accuracy, and guarantee the uniform weld quality.

• Journal of Oral Medicine and Pain
• /
• v.47 no.4
• /
• pp.198-205
• /
• 2022

Purpose: The first-line treatment of temporomandibular joint disorders (TMDs) should include self-management and education. Self-management techniques include moist heat application, stretching, diet control, and mandibular rest position adjustment. Although the effectiveness of video educational resources has been studied in multiple sectors, their application in TMD management has not yet been explored. This study seeks to assess how effective media education was at motivating TMD patients to self-management and improve symptoms. Methods: Data were obtained from the hospital records of TMD patients who visited the Department of Oral Medicine, Yonsei University Dental Hospital, between May 2020 and December 2021. First, without any differences between groups, a significance analysis was conducted between the degree of self-management and symptom improvement over time. At the second visit, one group received media education (n=31) linked to TMD management, while the other received written-oriented education (n=45). At the third visit, the number of precautions taken by the patients was determined and contrasted to that recorded in the previous visit between the groups. Generalized estimated equation multivariate models were applied for statistical analysis. Results: In the media education group, the frequency of stretching and the number of patients on pain-free diets increased substantially. Taking precautions improved daily pain intensity, maximum mouth opening, and pain intensity during the maximum unassisted opening. Conclusions: Media education could be beneficial for TMD patients because it allows them to take self-management precautions. The symptoms of the media education group improved, with no considerable distinction between both groups.

• Structural Engineering and Mechanics
• /
• v.81 no.1
• /
• pp.81-91
• /
• 2022

The effects of interaction between concrete-gypsum interface and edge crack on the failure behavior of the specimens in senicircular bend (SCB) test were studied in the laboratory and also simulated numerically using the discrete element method. Some quarter circular specimens of gypsum and concrete with 5 cm radii and hieghts were separately prepared. Then the semicircular testing specimens were made by attaching one gypsum and one concrete sample to one another using a special glue and one edge crack is produced (in the interface) by do not using the glue in that part of the interface. The tensile strengths of concrete and gypsum samples were separately measured as 2.2 MPa and 1.3 MPa, respectively. during all testing performances a constant loading rate of 0.005 mm/s were stablished. The proposed testing method showed that the mechanism of failure and fracture in the brittle materials were mostly governed by the dimensions and number of discontinuities. The fracture toughnesses of the SCB samples were related to the fracture patterns during the failure processes of these specimens. The tensile behaviour of edge notch was related to the number of induced tensile cracks which were increased by decreasing the joint length. The fracture toughness of samples was constant by increasing the joint length. The failure process and fracture pattern in the notched semi-circular bending specimens were similar for both methods used in this study (i.e., the laboratory tests and the simulation procedure using the particle flow code (PFC2D)).

• Investigative Magnetic Resonance Imaging
• /
• v.24 no.3
• /
• pp.123-131
• /
• 2020

Purpose: Joint label fusion (JLF) is a popular multi-atlas-based segmentation algorithm, which compensates for dependent errors that may exist between atlases. However, in order to get good segmentation results, it is very important to set the several free parameters of the algorithm to optimal values. In this study, we first investigate the feasibility of a JLF algorithm for prostate segmentation in MR images, and then suggest the optimal set of parameters for the automatic prostate segmentation by validating the results of each parameter combination. Materials and Methods: We acquired T2-weighted prostate MR images from 20 normal heathy volunteers and did a series of cross validations for every set of parameters of JLF. In each case, the atlases were rigidly registered for the target image. Then, we calculated their voting weights for label fusion from each combination of JLF's parameters (r_pxy, r_pz, r_sxy, r_sz, β). We evaluated the segmentation performances by five validation metrics of the Prostate MR Image Segmentation challenge. Results: As the number of voxels participating in the voting weight calculation and the number of referenced atlases is increased, the overall segmentation performance is gradually improved. The JLF algorithm showed the best results for dice similarity coefficient, 0.8495 ± 0.0392; relative volume difference, 15.2353 ± 17.2350; absolute relative volume difference, 18.8710 ± 13.1546; 95% Hausdorff distance, 7.2366 ± 1.8502; and average boundary distance, 2.2107 ± 0.4972; in parameters of r_pxy = 10, r_pz = 1, r_sxy = 3, r_sz = 1, and β = 3. Conclusion: The evaluated results showed the feasibility of the JLF algorithm for automatic segmentation of prostate MRI. This empirical analysis of segmentation results by label fusion allows for the appropriate setting of parameters.

• Earthquakes and Structures
• /
• v.15 no.5
• /
• pp.499-511
• /
• 2018

This paper aims to investigate the seismic performance of the prestressed steel strips retrofitted RC beam-column joints. Two series of joint specimens were conducted under compression load and reversed cyclic loading through quasi-static tests. Based on the test results, the seismic behavior of the strengthened joints specimens in terms of the failure modes, hysteresis response, bearing capacity, ductility, stiffness degradation, energy dissipation performance and damage level were focused. Moreover, the effects of the amount of the prestressed steel strips and the axial compression ratio on seismic performance of retrofitted specimens were analyzed. It was shown that the prestressed steel strips retrofitting method could significantly improve the seismic behavior of the RC joint because of the large confinement provided by prestressed steel strips in beam-column joints. The decrease of the spacing and the increase of the layer number of the prestressed steel strips could result in a better seismic performance of the retrofitted joint specimens. Moreover, increasing the axial compression ration could enhance the peak load, stiffness and the energy performance of the joint specimens. Furthermore, by comparison with the specimens reinforced with CFRP sheets, the specimens reinforced with prestressed steel strips was slightly better in seismic performance and cost-saving in material and labor. Therefore, this prestressed steel strips retrofitting method is quite helpful to enhance the seismic behavior of the RC beam-column joints with reducing the cost and engineering time.

• Steel and Composite Structures
• /
• v.27 no.6
• /
• pp.727-745
• /
• 2018

The design criteria and the corresponding performance levels characterize the response of extended stiffened end-plate beam-to-column joints. In order to guarantee a ductile behavior, hierarchy criteria should be adopted to enforce the plastic deformations in the ductile components of the joint. However, the effectiveness of thesecriteria can be impaired if the actual resistance of the end-plate material largely differs from the design value due to the potential activation of brittle failure modes of the bolt rows (e.g., occurrence of failure mode 3 in the place of mode 1 per bolt row). Also the number and the position of bolt rows directly affect the joint response. The presence of a bolt row in the center of the connection does not improve the strength of the joint under both gravity, wind and seismic loading, but it can modify the damage pattern of ductile connections, reducing the gap opening between the end-plate and the column face. On the other hand, the presence of a central bolt row can influence the capacity of the joint to resist the catenary actions developing under a column loss scenario, thus improving the joint robustness. Aiming at investigating the influence of these features on both the cyclic behavior and the response under column loss, a wide range of finite element analyses (FEAs) were performed and the main results are described and discussed in this paper.

• Journal of Acupuncture Research
• /
• v.27 no.2
• /
• pp.43-49
• /
• 2010

Objectives : Among young generation, the prevalence of spinal disorders is known to be increasing. This study aimed to analyze the clinical data of spinal disorder in young ages in Korea. Methods : Number of patient, kinds of disorder, and medical cost were analyzed for patients(7~18 years) underwent spinal disorders using computerized database of Health Insurance Review and Assessment Service(HIRAS) from 2004 to 2008. We included dorsopathies as spinal disorder according to Korean Classification of Diseases(KCD) and excluded spinal disorder caused by trauma. We compared the data of traditional Korean medicine treatment with that of western medical care. Results : 4.8% of the children and adolescents had medical treatment with spinal disorder in 2008. The claim number and medical cost for both traditional Korean medicine and western medicine treatment are increasing 1.8 and 1.3 times respectively over 5 years. Total medical spent of western clinic was 2.1 times than those of traditional Korean clinic. The most common spinal disorder was dorsalgia(31.8%) and scoliosis(13.5%) in western clinics while back pain(29.0%) and neck pain(10.8%) in oriental clinic. Conclusions : We first reported the clinical tendency of spinal disorder in Korean children adolescents from 2004 to 2008. This study will support the development of a strategy for traditional Korean medicine-based prevention or treatment of spinal disorders in young generation.

• Research in Community and Public Health Nursing
• /
• v.9 no.2
• /
• pp.313-323
• /
• 1998

This study is to develop the model on the joint employment system of occupational health nurse practitioners for medium or small sized enterprises in Korea based on the comparison opinions between employers and occupational health nurses (OHN). The data were collected by questionnaires from Oct. to Nov. in 1997. The number of subjects was 210 OHNs and 176 employers, response rate was 47.1% for OHNs and 23.2% for employers. The SAS PC program was used for the descriptive statistics. The results were as follow: 1. More than three years career was preferred for qualification of OHN by employers and OHNs. OHNs preferred that all instruments and materials should be equipped in each industry, but employers preferred that they should be equipped by OHN. 2. For the limit number of industries and employees per one OHN, employers preferred average 2.25 industries and 307 employees, OHNs preferred average 3.0 industries and 448 employees. Both of them preferred two times visit per week for all day long. 3. OHNs wanted that the local office of Ministry of Labor could act as mediator, but employers preferred direct contact individually. For the average wage, employers preferred 887,000 won per month, but OHNs preferred 1,960,000 won per month. 4. OHNs preferred the Korean Association of Occupational Health Nurse as the recruit agency. Finally, employers and OHNs have the opinions that they can choose this system depending on the condition. There is in need of development of effective strategy for this new system such as manpower development, cost-benefit analysis, establishment of occupational health service standard, advertisement for employers, and government supported project.