• 대한정형도수물리치료학회지
• /
• 제22권1호
• /
• pp.71-76
• /
• 2016

Background: The objective of this research is to provide base line data on Korea Baseball rehabilitation treatment by presenting the distribution of upper extremity surgeries according the surgical sites of Korean professional baseball players. Methods: The targets of this research are 561 players from nine Korean baseball clubs. The number of players that have undergone surgery was investigated. In other words, the frequency of shoulder joint surgeries, elbow joint surgeries, and wrist and hand surgeries per each baseball club was investigated. Results: The number of the players who have had surgeries was 151, but among the players, there were some who have had repeated surgeries for which the total number of surgery experience was 162. The result showed that elbow joint surgeries were the most frequently enacted, followed by shoulder joint surgeries, and wrist and hand surgeries. From the nine clubs, Samsung was the club with the highest frequency of surgeries. Conclusions: This research shows that Korean professional baseball players need special training centers with systematic rehabilitation programs. Another conclusion suggests that urgent need for rehabilitation program of upper arm which particularly focused on elbow joint is existing. On the basis of this research, we expect more studies on the specific rehabilitation programs which is categorized by injury areas.

• Ocean Systems Engineering
• /
• 제8권4호
• /
• pp.409-426
• /
• 2018

This paper presents the strengthening of tubular joint by wrapping Carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP). In this study, total number of layers, stacking sequence and length of wrapping are the different parameters involved when fiber reinforced polymers (FRP) composites are used for strengthening. For this, parameters where varied and results were compared with the reference joint. The best stacking sequence was identified which has the highest value in ultimate load with lesser deflections. For determining the best stacking sequence, numerical investigation was performed on CFRP composites; length of wrapping and number of layers were fixed. Later, the studies were focused on CFRP and GFRP strengthened joint by varying the total number of layers and length of wrapping. An attempt was done to propose a parametric equation from multiple regression analysis, which can be used for CFRP strengthened joints. Hashin failure criteria was used to check the failure of composites. Results revealed that FRP was having a greater influence in the load bearing capacity of joints, and in reducing the deflections and stresses of joint under axial compressive loads. It was also seen that, CFRP was far better than GFRP in reducing the stresses and deflection.

• Computers and Concrete
• /
• 제34권1호
• /
• pp.15-31
• /
• 2024

This study explores the failure mechanisms of 'I' shaped non-persistent cracks under uniaxial loads through a combination of experimental tests and numerical simulations. Concrete specimens measuring 200 mm×200 mm×50 mm were manufactured, featuring 'I' shaped non-persistent joints. The number of these joints varied from one to three, with angles set at 0, 30, 60, and 90 degrees. Twelve configurations, differing in the placement of pre-existing joints, were considered, where larger joints measured 80 mm in length and smaller cracks persisted for 20 mm with a 1 mm crack opening. Numerical models were developed for the 12 specimens, and loading in Y-axis direction was 0.05 mm/min, considering a concrete tensile strength of 5 MPa. Results reveal that crack starting was primarily influenced by the slope of joint that lacks persistence in relation to the loading direction and the number of joints. The compressive strength of the samples exhibited variations based on joint layout and failure mode. The study reveals a correlation between the failure behavior of joints and the number of induced tensile fracture, which increased with higher joint angles. Specimen strength increased with decreasing joint angles and numbers. The strength and failure processes exhibited similarities in both laboratory testing and numerical modeling methods.

• 콘크리트학회지
• /
• 제8권4호
• /
• pp.171-179
• /
• 1996

PC판넬 조립식 구조의 수직.수평접합부의 유용한 접합형태에 따라 접합부 전단내력을 상승시킬 수 있는 접합부 설계의 기본 형태를 제시하는데 연구의 목적이 있다. 시험체는 수직접합부의 경우 전단키의 개수 및 보강철물의 종류에 변수를 주고 수평접합부의 경우에는 전단키의 갯수 및 가력방향에 변수를 주어 총 22개의 시험체를 제작하여 실험하였다. 결론적으로 수직접합부의 경우, 수평보강철물이 있는 시험체는 기존의 다른 실험결과와 마찬가지로 수평보강철물이 없는 시험체에 비하여 연성이 크게 나타났다. EH한 와이어로프와 원형철근 두 종류의 보강철물을 사용하여 실험한 결과 와이어 로프를 사용한 시험체는 원형철근을 사용한 시험체와 최대내력 및 전단강성 등 전체적인 구조거동이 거의 비슷하게 나타났다.

• 화약ㆍ발파
• /
• 제35권4호
• /
• pp.1-9
• /
• 2017

본 연구는 인공절리를 이용한 발파효과 검토를 위해 인공절리 수, 인공절리 간격, 인공절리 경사에 따른 발파속도의 영향 및 기여도를 평가 분석한 연구이다. 인공절리 상태 변화에 따른 발파속도는 동적해석 프로그램인 AUTODYN을 이용하여 획득하였다. 수치해석 결과에 대해 정규화 분석을 수행하였고, 각 인자의 기여도 분석을 위해 강건설계 실험계획법을 이용하여 설계 인자를 분석하였다. 각 인자는 3수준으로 설정하였고, 분석에 직교 배열표 $L_9(3^4)$를 사용하였다. 정규화 분석을 통해 수치해석 결과를 분석한 결과 인공절리 경사가 증가함에 따라 발파속도는 감소하는 경향을 보였다. 또한, 인공절리 간격과 인공절리 경사에 대해 발파속도를 분석한 결과 발파속도는 경사가 수직일 때 인공절리 간격이 증가함에 따라 감소는 경향을 보였다. 강건설계를 이용한 기여율 분석결과 발파속도에 가장 큰 영향을 미치는 것은 인공절리 경사이며, 이어서 인공절리 수, 인공절리 간격 순으로 기여율이 평가되었다.

• 대한임상검사과학회지
• /
• 제45권4호
• /
• pp.180-187
• /
• 2013

The author surveyed and analyzed the research papers of korean journal of clinical laboratory science (KJCLS) that have been posted for 28 years from 17 volumes in 1985 to 44 volumes in 2012 in the time of 50th anniversary of foundation of the korean association of medical technologists (KAMT) of in 2012. This study is aimed to provide members with basic materials helpful to research development and suggest development measures of journal. The author analyzed the number of papers, research field, type of papers, and number of authors based on the title of paper. The total number of papers is 916 and average number of paper is 33. The research field was biochemistry 167 (18.2%), microbiology 160 (17.4%), histology & cytology 99 (10.8%), molecular genetics 77 (8.5%), hematology 69 (7.5%), physiologic function 64 (7.0%), immunology 60 (6.5%), blood bank 33 (3.6%), radioimmunoassay 33 (3.6%), parasitology 27 (2.9%), quality control 18 (2.0%), urinalysis & body fluid 13 (1.4%), cytogenetics 12 (1.3%), flow cytometry analysis 6 (0.7%), and other articles were 78 (8.5%). Regarding the type of papers, original article was 777 (84.8%), case report 52 (5.7%), review 23 (2.5%), others 64 (7.0%). Regarding the number of paper authors, single author was 208 (22.7%), 2-man joint authors 178 (19.4%), 3-man joint authors 181 (19.8%), 4-man joint authors 151 (16.5%), over-5-man joint authors 198 (21.6%). The average number of papers was 33 for 28 years from 1985 to 2012, it is fewer than number of technologists and professors working currently regardless of the level of quantity and quality. The KAMT needs paper promoting measures and strategic investment on the scholarly journals that can aggressively promote to members and inspire research desire for korea citation index (KCI) registered article selection of KJCLS in the future.

• 한국직업건강간호학회지
• /
• 제7권1호
• /
• pp.97-114
• /
• 1998

The occupational health services for the minor enterprises are poor comparing with that of large enterprises in Korea. In 1997, Korean government announced officially the law on joint employment system of occupational health practitioners to solve the problems. This study is to develop the model on the joint employment system of occupational nurse practitioners for minor enterprises in Korea based on the opinions of occupational health nurses (OH Ns). The data were collected by questionnares from October to November in 1997. The number of subjects was 210 occupational health nurses who had participated the mandatory nursing education program provided by the Korean Occupational Health Nurses Association(KOHNA). The response rate was 47.1%. The contents of questionnaires were general characteristics, occupational & job characteristics of OHNs, and the views on the joint employment system. The SAS-PC program was used for the statistical analysis. The results were as followed, (1) The proper number of industies was 3 and the appropriate number of workers was 448 for one joint employed occupational nurse practitioner (J EONP). (2) 44.7% of the OHNs wanted that the Ministry of Labor monitored the way and content of contraction b/w JEONP and minor emterprises, 82.6% of the OHNs wanted that KOHNA managed the employment informations. (3) The OHNs of occupational health agencies showed more positive attitude than the OHNs of private industries on the joint employment system. (4) 88.3% of the OHNs wanted the education training for JEONP. Especially in occupational hygiene and safety control. (5) The OHNs expected the role expansion of Occupational Health Nursing by JEONP system. At the same time they worried the adverse effects. For the successful execution of this system, it is necessary the cooperation among the Ministry of Labor, KOHNA, the minor enterprises, and the OHNs.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.7-12
• /
• 2000

This paper describes the bending strength properties of laminated woods which had three kinds of specimens according to finger length-12, 4.5 mm and butt joint and the acoustic emissions (AEs) generated during the test. 3-ply laminated wood beams were tension side layers (lower layers) composed of one middle lamina and two side-jointed laminae, with one butt joint ($_1BJ$), one finger joint (12mm, $_1FJ_{12}$) or one finger joint (4.5mm, $_1FJ_{4.5}$) in the middle lamina of tension side layer. And 3-ply laminated wood beams were tension side layers (lower layers) also composed of one lamina, with one butt joint (BJ), one finger joint (12mm, $FJ_{12}$) or one finger joint (4.5mm, $FJ_{4.5}$/) in tension side layer. Cryptomelia pieces were cut for butt and two finger types and glued with resorcinol-phenol resin adhesive. The results were as follows It was not effective in the bending modulus of elasicity (MOE) with IFJL type and had no difference from finger length. The bending modulus of rupture (MOR) of laminated wood beams including finger joint was the same values as that including butt feint and had no difference from finger length. It was effective in MOE with FJL type and had no difference from finger length. The effect of finger joint on MOR was much higher than that of butt joint but had no difference from finger length. The AE generation time of IFJL type was earlier than that of the control wood and the number of AE count was much more than that of the control wood. However, the AE generation time of FJL type was earlier than that of the control wood and the number of U count was much fewer than that of the control wood.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4658-4679
• /
• 2017

Android is now the most popular smartphone platform and remains rapid growth. There are huge number of sensitive privacy information stored in Android devices. Kinds of methods have been proposed to detect Android malicious applications and protect the privacy information. In this work, we focus on extracting the fine-grained features to maximize the information of Android malware detection, and selecting the least joint features to minimize the number of features. Firstly, permissions and APIs, not only from Android permissions and SDK APIs but also from the developer-defined permissions and third-party library APIs, are extracted as features from the decompiled source codes. Secondly, feature selection methods, including information gain (IG), regularization and particle swarm optimization (PSO) algorithms, are used to analyze and utilize the correlation between the features to eliminate the redundant data, reduce the feature dimension and mine the useful joint features. Furthermore, regularization and PSO are integrated to create a new joint feature mining method. Experiment results show that the joint feature mining method can utilize the advantages of regularization and PSO, and ensure good performance and efficiency for Android malware detection.