• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.180-182
• /
• 2005

Development of FSW for use in lap joint production would expend the number of applications that could benefit from the technique. In the study, an extensive investigation was carried out on FSW lap joints, including interface morphology and mechanical properties. Welding variables included welding speed, rotation speed and, of particular importance, lap joint a methods. Examination of metallographic cross sections and failure locations showed a critical sheet interface present in all welds. Results indicates FSW lap joints may potentially replace other joining processes like resistance spot welding and riveting.

• 한국응용과학기술학회지
• /
• 제37권2호
• /
• pp.224-231
• /
• 2020

본 연구의 목적은 유도 허벅다리걸기 기술 발휘 시 발목 관절의 테이핑 처치가 하지 관절과 압력중심(COP, center of pressure)에 미치는 영향을 분석하는데 있었다. 대학 유도 선수 20명(연령, 20.9±0.8세; 신장, 168.6±7.4cm; 체중, 73.5±11.6kg; 신체질량지수, 25.7±2.6kg/㎡)이 참여하였으며, 발목 관절 테이핑 처치 전과 후의 2가지 조건에서 허벅다리걸기 기술 발휘 시 지지다리 관절의 각도와 압력중심 요인을 분석하여 다음의 결과를 도출하였다. E2(t=2.411, p=.027) E4(t=2.388, p=.029)시점에서 발목 관절의 각도는 테이핑 처지 전에 비해 처치 후 발목의 각도가 통계적으로 적은 수치를 나타내었고, E2(t=-2.343, p=.032) E3(t=-4.531, p=.000)시점에서 힙 관절의 각도는 통계적으로 크게 나타났다. 그리고 발목 관절 테이핑 처치 후 좌·우의 COP 이동은 상대를 메치는 P3 국면에서 통계적으로 크게 나타났으며(t=2.670, p=.016), 전·후의 COP 이동은 상대의 무게 중심을 기울이는 P1 국면에서 통계적으로 적은 수치를 나타내었다(t=2.846, p=.011). 그러므로 허벅다리걸기를 특기로 사용하는 유도 선수들은 발목 관절 테이핑으로 인해 발생하는 지지관절의 운동 기능과 COP의 이동범위를 고려하여 사용하는 것에 대하여 제안하고자 한다.

• 한국지반공학회논문집
• /
• 제30권7호
• /
• pp.17-26
• /
• 2014

절리를 포함한 암반에서 터널굴착시 발생하는 내공변위는 터널의 안정성과 필요 확보공간 및 시공성을 위해서 매우 중요한 인자이다. 터널굴착시 발생할 수 있는 내공변위의 크기는 탄성계수가 큰 영향을 미치는 인자이며 특히 절리면이 터널거동을 지배하는 암반에서는 신뢰성 있는 절리암반의 탄성계수를 산정하는 것은 매우 중요하다. 절리암반의 탄성계수는 암석종류, 절리조건, 하중조건 등과 같은 많은 인자에 의해서 영향을 받는다. 그럼에도 불구하고 기존의 대부분의 연구는 암석 및 절리, 터널 굴착하중 조건 등을 체계적으로 고려하지 않고 압축하중 조건에 근거한 대략적인 경험식에 초점을 두고 있다. 그러므로 본 연구에서는 터널 굴착하중 조건에서의 절리암반의 탄성계수를 보다 합리적으로 추정하기 위하여 암석 및 절리조건을 체계적으로 고려하였다. 본 연구에서는 암석종류, 절리전단강도, 절리경사각, 절리군의 수 및 절리간격을 해석인자로서 고려하였다. 다양한 암석 및 절리조건을 고려하여 수치해석적 매개변수 연구를 수행하였고, 그 결과를 기존의 경험적인 방법들과 비교분석하였으며, 다양한 암석 및 절리조건에서의 탄성계수에 대한 변화도표를 제시하였다. 본 연구를 통해 얻어진 결과는 절리암반에서 터널굴착으로 인해 발생되는 터널 내공변위를 파악하는데 실무적으로 활용될 수 있을 것으로 기대된다.

• Journal of Acupuncture Research
• /
• 제21권4호
• /
• pp.65-73
• /
• 2004

Objective: This study was designed to compared the effect of general acupuncture on degenerative arthritis of knee joint with 8 constitution acupuncture by Visual Analogue Scale(VAS). Methods: VAS was used for this research, with the pain indicator of 10 and 0 which represents a pain of first visit and a status of no pain respectively. Two groups, consisting of 40 patients, was randomly allocated for this research. SPSS(Statistic Program for Social Science) 10.0 for window was used for a statistical analysis. Independent T-test and Mann Whitney U test was performed to evaluate the improvement of each group by the treatment number and to compare that of two groups. Results: As a result of the comparison analysis between two groups after 20th treatment, the improvement of subjective symptoms in 8 constitution acupuncture group was shown more effective than that in general acupuncture group, while, After 10th treatment, there was no significant difference between two groups in VAS. Conclusion: It is suggested that the effect of 8 constitution acupuncture should be significantly different from that of general acupuncture on degenerative arthritis of knee joint. Further study is needed to confirm the effectiveness of 8 constitution acupuncture.

• 대한의용생체공학회:의공학회지
• /
• 제14권3호
• /
• pp.235-242
• /
• 1993

In the early stage of sacroilitis, it is'difficult to detect sacroiliac(Sl) abnormalities by conventional plain X-ray even though there are characteristic symptoms of ankylosing spondylitis. 3 dimensional volume rendering from the CT image was performed to make an early de tection of the structural changes of Sl joint. 2 cases who had clinical impression of ankylosing spondylitis without sacroilitis in plane X-ray and 1 case of typical ankylosing spondylitis as well as 1 case of normal control were studied. The Sl Joints were separated and each joint surface of sacrum and ilium was independently reconstructed by a special 3D manipulation program. All 2 patiant who complained of inflammatory lower back pain with no abnormal findings in the plain X-ray showed structural changes in 3 dimensionally reconstructed surface Image of the Sl joint compared to the normal control. Authors tried several parameters, such as fourler analysis of each surface and the mean and variance of Sl joint gap. We couldn't tell the statistical significance because of the limited number of cases. However, the parameters showed difference according to the progression of disease.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.55-63
• /
• 2002

Human body balances right and left leg centering around pelvis and spine. Therefore, imbalance of lower extremity means disequilibrium of the body. The difference of lower extremity length can cause a number of clinic symptoms including scoliosis, low back pain, sacroiliac pain, and sports injury. In this study, we tried to analyze low back pain and joint stiffness resulting from the difference of lower extremity length. The subjects were 80 male students who are 20-25 years old. The results of this study were as following: 1. Low back pain depending on the difference of lower extremity length One group which the difference of lower extremity length is above 12mm showed average different length as 18.0mm, the other group which one is below 12mm showed as 6.3mm. A group of above 12mm had more severe low back pain than a group of below 12mm. 2. Joint stiffness depending on the difference of lower extremity length A group of above 12mm had more severe joint stiffness than a group of below 12mm.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.681-690
• /
• 2018

This paper highlights results of some experimental work that deals with strengthening of bolted shear joints in thin-walled ferrocement structure where steel wires, bent into U-shape are considered as simple inserts around the bolt hole. The parameters investigated include the number of layers of wire mesh, edge distance of bolt hole, size and location of the inserts. Test results have shown that for small edge distance, failure occurred either in cleavage or shearing mode, and the strength of the joint increased with an increase in the edge distance. This continued up to an upper limit set by either tension or bearing failure. The experimental study further revealed that for a given edge distance the strength of a joint can significantly be enhanced by using U-inserts. The equations developed for predicting joint strength in ferrocement composites can also be modified to include the effects of the inserts with a good level of accuracy.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.459-468
• /
• 2018

In this paper, the effect of non-persistent joints was determined on the behavior of concrete specimens subjected to biaxial loading through numerical modeling using particle flow code in two dimensions (PFC2D). Firstly, a numerical model was calibrated by uniaxial, Brazilian and triaxial experimental results to ensure the conformity of the simulated numerical model's response. Secondly, sixteen rectangular models with dimension of 100 mm by 100 mm were developed. Each model contains two non-persistent joints with lengths of 40 mm and 20 mm, respectively. The angularity of the larger joint changes from $30^{\circ}$ to $90^{\circ}$. In each configuration, the small joint angularity changes from $0^{\circ}$ to $90^{\circ}$ in $30^{\circ}$ increments. All of the models were under confining stress of 1 MPa. By using of the biaxial test configuration, the failure process was visually observed. Discrete element simulations demonstrated that macro shear fractures in models are because of microscopic tensile breakage of a large number of bonded discs. The failure pattern in Rock Bridge is mostly affected by joint overlapping whereas the biaxial strength is closely related to the failure pattern.

• Journal of Acupuncture Research
• /
• 제17권4호
• /
• pp.88-99
• /
• 2000

Objectives : This study was performed to evaluate the clinical effect of acupuncture on microtraumatic injuries of the knee joint. Methods : Among the outpatients with knee joint pain who visited to Department of Acupuncture & Moxibustion, National Medical Center from February 2000 to September 2000, we selected 15 cases that showed normal finding in both X-ray and neurological examination, and that were categorized into microtraumatic injuries by the physical examination based on the Cyriax's orthopedic medicine. During acupuncture therapy, the patients were ordered to move involved side actively. The effect was assessed through questionnaires of CNRS(Cincinnati Knee Rating System). Results : We investigated 11 female and 4 male patients. The most common distribution of age was 30's(40%). The most commom duration of symtoms was from 3 to 5 months(40%). The most common microtraumatic injury was pes anserinus bursitis(33.3%), and followed by iliotibial band friction syndrome(20%), and patellar tendinitis(20%). In the CNRS, the mean number of before treatment was 60.6 and after was 66.5. 10 cases among the 15 patients were improved(66.6%). Conclusions : These results suggest that the acupuncture therapy combined with active movements of involved side was effective treatment modality on microtraumatic injuries of the knee joint.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권5호
• /
• pp.1238-1259
• /
• 2024

Previous studies on joint optimization of computation offloading and service caching policies in Mobile Edge Computing (MEC) have often neglected the impact of dependency-aware subtasks, edge server resource constraints, and multiple users on policy formulation. To remedy this deficiency, this paper proposes a many-objective joint optimization dependency-aware task offloading and service caching model (MaJDTOSC). MaJDTOSC considers the impact of dependencies between subtasks on the joint optimization problem of task offloading and service caching in multi-user, resource-constrained MEC scenarios, and takes the task completion time, energy consumption, subtask hit rate, load variability, and storage resource utilization as optimization objectives. Meanwhile, in order to better solve MaJDTOSC, a many-objective evolutionary algorithm TSMSNSGAIII based on a three-stage mating selection strategy is proposed. Simulation results show that TSMSNSGAIII exhibits an excellent and stable performance in solving MaJDTOSC with different number of users setting and can converge faster. Therefore, it is believed that TSMSNSGAIII can provide appropriate sub-task offloading and service caching strategies in multi-user and resource-constrained MEC scenarios, which can greatly improve the system offloading efficiency and enhance the user experience.