• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1303-1306
• /
• 2005

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is favorable that the fatigue life is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type bellows using the finite element method. The effective factors, mountain height, length, thickness, and number of mountains and the length of joint are considered and the proper values are chosen for the simulation. The results shows that if the number of mountains are reduced, the volume decreases while the stress increases. However, the number of mountains are increased, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the volume and stress are decreasing at a certain lower value region.

• 대한전자공학회논문지SD
• /
• 제38권11호
• /
• pp.810-820
• /
• 2001

전통적인 이진 가산기는 최상위 비트까지 올림수 전달이 발생하고 직렬가산을 수행한다. 그러나, 변형부호화자리수 체계를 이용한 광가산기는 이진 가산기에서 발생하는 연속적인 올림수 전달을 제한하도록 제안되었다. 본 논문에서는 9가지 부호화된 입력 패턴 중에서 동일한 가산 결과를 가지는 패턴을 동일군으로 하여 5개의 기준패턴으로 만들어 기호치환 규칙수를 줄였다. 또한 결합공간부호화된 입력 패턴과 마스크의 직렬연결로 기존의 기호치환 가산기의 인식 단계에서 필요한 어떤 공간적인 연산없이 인식하여 시스템의 크기를 줄였다.

• 한국강구조학회 논문집
• /
• 제27권1호
• /
• pp.53-61
• /
• 2015

인장이음은 고장력 볼트의 체결력과 모재 그리고 고장력 볼트의 내력을 직접적으로 활용하고, 볼트구멍의 가공수나 체결개소의 감소, 피로저항성 등에 있어 유리하며 때문에 역학적으로 매우 효율적인 연결이다. 이러한 인장이음은 교량의 거더와 가로보의 이음, 주탑의 수평이음, 보-기둥 연결부, 바닥판 단부 2차부재 연결부, 브라켓 등에 적용될 수 있다. 본 연구에서는 인장이음의 역학적 거동을 파악하기 위해서 T-인장이음에 대한 정적실험을 수행하였다. 시험변수는 고장력 볼트의 직경, 플렌지 두께 및 체결력 감소이며, 인장이음의 파괴양상과 내력, 플랜지 두께와 고장력 볼트의 직경의 영향, 체결력의 영향에 대해 분석하였다.

• The Korean Journal of Pain
• /
• 제22권3호
• /
• pp.229-233
• /
• 2009

Background: Sacroiliac (SI) joint pain is a challenging condition that causes lower back or buttock pain; however, there is no universally accepted long-term treatment. There have been several reports of ligament prolotherapy for SI joint pain, but these have had inconsistent results, probably due to the lack of a specific diagnosis for patient selection and variability in the volume, number and sites of injection. Therefore, this study was conducted to assess the efficacy of intraarticular prolotherapy for relieving SI joint pain diagnosed by local anesthetic intraarticular injection. Methods: Twenty-two patients with SI joint pain confirmed by 50% or more improvement in response to local anesthetic block underwent intraarticular prolotherapy with 25% dextrose water every other week three times. The numeric rating scale (NRS) for pain and Oswestry disability index (ODI) were assessed at the initial visit and after completion of a series of prolotherapy and the NRS was checked during monthly follow-up sessions to evaluate the long-term effectiveness of this technique. Results: Twenty patients completed prolotherapy and followed up as scheduled. The NRS and ODI were significantly improved from 6 (4-8) and $34.1{\pm}15.5$ to 1 (0-3) and $12.6{\pm}9.8$ (P < 0.01), respectively, at 1 month after prolotherapy. The mean duration of pain relief of 50% or more was 12.2 months (95% CI, 10.0-14.3) as determined by Kaplan-Meier survival analysis. Conclusions: Intraarticular prolotherapy provided long-term relief of sacroiliac joint pain and may have more benefits than ligament prolotherapy or neurolysis.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권4호
• /
• pp.10-21
• /
• 2014

프리캐스트 방식에 의해 제작이 가능한 격자형 강합성 바닥판의 이음부는 콘크리트 전단키와 고장력볼트 체결로 구성될 수 있으며, 이와같은 이음부 자체에 대한 휨 및 전단성능은 부재요소에 대한 실험을 통해 분석된 바 있다. 본 연구에서는 실제 바닥판 구조시스템에서 이음부에 의한 횡방향 하중전달 거동을 분석하고자, 길이 2.5m 및 폭 1m의 단위 바닥판 모듈 한쌍에 이음부를 설치한 실험체를 제작하고 중심 및 편심가력 휨실험을 하였다. 이음부에 하중이 직접 가해지는 중심재하 조건에서 고장력볼트의 설치개수가 30cm 간격 9개에서 60cm 간격 4개로 줄어 들 경우, 재하단계에 따라 이음부의 회전이 비교적 더 크게 증가하고, 이에 따라 바닥판 횡방향으로의 하중전달 정도가 감소함을 알 수 있었다. 그러나, 한쪽 바닥판의 중심에 집중하중이 가해지는 편심재하 조건의 경우에는 횡방향 하중전달 거동에 큰 차이가 없었다. 하중 재하방법별로 이음부의 거동을 비교한 결과, 집중하중에 대한 바닥판 횡방향으로의 하중분배 및 전달량은 이음부 자체의 성능뿐만 아니라 바닥판 슬래브의 펀칭전단에 의해서도 제한되는 것으로 분석되었다. 또한, 펀칭 전단파괴가 발생할 때까지 이음부의 고장력볼트가 항복하지 않은 점을 고려할 때, 이음부 고장력볼트의 설치개수를 4개에서 9개로 증가시키는 것은 실질적으로 강도 보다는 이음부 및 바닥판의 휨강성 성능 증가에 더 큰 영향을 미치는 것으로 사료된다.

• 복식
• /
• 제61권1호
• /
• pp.47-57
• /
• 2011

This study is aimed at presenting the information on tailor-made clothes products which could positively relieve the psychological anxiety of the aged and enhance their living independence, and also at the development of clothes designs which could help them enjoy their healthy and activities. Based on the survey, the study conducted the research and analysis on the wearing practices, problems, and improvements for the clothes for the aged and found out their favorite clothes designs and colors. Based on the findings, the clothes models were recruited that reflect the physical features of silver-generation women and assist them with their joint protection. Moreover, the emphases were placed on the convenience of dressing or undressing, and the current fashion of development of clothes. The number of the clothes models developed were 11 for one pants suit, two skirt suits, one knit wear, one training wear, and one bolero.

• 대한정형외과스포츠의학회지
• /
• 제7권1호
• /
• pp.8-14
• /
• 2008

Elbow joint injuries during exercise mostly occur by repeated stress to the joint than direct trauma. A pitcher who uses his arm above his head is most likely to be injured. So learning the right way to exercise and gaining the strength by maturating the body are essential for diminishing the chance of injury. On lateral ulnar tendon injury, which is most commonly injured area on elbow joint, pitchers generally complain of pain in arm movement above head and reduction of velocity, accuracy, and number of pitching. When there is pain on upper arm in harsh using, the stress fracture must be thought and epicondylar physis fracture of medial arm can occur by repeated abduction stress and contraction of flexors on forearm on children with immature skeleton. Osteochondritis dissecans of capitullum occur in young athletes who use there upper limb continuously lifting weights and gym work. And stress of abduction-extension includes damage of soft tissue and bone components, post medial crush syndrome, lateral ulnar ligament injury, extensor-abductor injury, stress of radius- capitullum are in this category.

• 대한인간공학회지
• /
• 제15권1호
• /
• pp.39-52
• /
• 1996

This paper measured the range of arm joint motion for Korean 54 males in twenties. The range of the arm joint motion of the subjects was measured directly using Goniometer and protractor. The number of the static and the dynamic anthropometric variables are seven and thirteen, respectively. The anthropometric data are analyzed by basic statistical analysis (four group), correlation analysis and regression analysis using commercial SAS program. The results of analysis are compared with American students anthropometric data by Laubach(1978). Thin subjects have larger movement angle as wrist flexion, wrist abduction, elbow flexion, and elbow wupination and have smaller as wrist adduction and shoulder flexion. Fat subjects have larger movement angle as shoulder flexion and are smaller wrist abduction, elbow flexion, pronation, shoulder extension, shoulder adduction, shoulder abduction, and shoulder medial rotation Korean are more flexible than American in wrist and ranges of elbow flexion and elbow rotation. The shoulder movement is similar to that of American, but shoulder flexion is less flexible.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.275-282
• /
• 2000

The seismic behavior of moment connections consisting of reinforced concrete columns and steel beams is investigated based on four 2/3 scale tests of exterior beam-column joints subject to reversed cyclic loading. The major test parameters were the number of hoops the isolated concrete contribution and the use of headed studs in the joint regions between columns and beams. Their influence on the seismic response of the connections is presented and compared. Among them the CF3 specimen containing two hoops each in the joint and column regions above and below exhibited the most favourable hysteretic response. This indicates that this type of joint details can be used in the low seismic areas such as Korea.

• 소음진동
• /
• 제7권1호
• /
• pp.61-69
• /
• 1997

Despite of the development in the finite element method, it is difficult to get the finite element model describing the dynamic characteristics of the complex structure exactly. Therefore a number of different methods have been developed in order to update the finite element model of a structure using vibration test data. This paper outlines the basic formulation for the frequency response function based updating method. One important advantage of this method is that the intermediate step of performing an eigensolution extraction is unnecessary. Using simulated experimental data, studies are conducted in the case of 10 DOF discrete system. The solution of noisy and incomplete experimental data is discussed. True measured frequency response function data are used for updating the finite element model of a beam and a plate. Its applicability to the joint identification is also considered.