• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.34-43
• /
• 2020

A study has been done for self-starting torque of vertical axis wind turbine blade. It is especially concentrated to evaluate the torque coefficient before starting rotation. Two different aerofoils(AMI903 and AMI904) are proposed to benchmark the possible best blade(supercritical airfoil) for self-starting performance. Torque coefficients in the tangential direction of rotation are given with respect to the angle of attack in terms of drag coefficient and lift coefficient. Torque coefficient shows that the effect of Reynolds number is minimal. The thicker blade(AMI904) between two different proposed airfoils has bigger torque coefficient, which is attributed to lower lift coefficient and higher drag coefficient.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.11-21
• /
• 2005

A three-dimensional parallel Euler flow solver has been developed for the simulation of unsteady rotor-fuselage interaction aerodynamics on unstructured meshes. In order to handle the relative motion between the rotor and the fuselage, the flow field was divided into two zones, a moving zone rotating with the blades and a stationary zone containing the fuselage. A sliding mesh algorithm was developed for the convection of the flow variables across the cutting boundary between the two zones. A quasi-unsteady mesh adaptation technique was adopted to enhance the spatial accuracy of the solution and to better resolve the wake. A low Mach number pre-conditioning method was implemented to relieve the numerical difficulty associated with the low-speed forward flight. Validations were made by simulating the flows around the Georgia Tech configuration and the ROBIN fuselage. It was shown that the present method is efficient and robust for the prediction of complicated unsteady rotor-fuselage aerodynamic interaction phenomena.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.735-743
• /
• 2011

In this study, the distribution of surface pressure was measured in a steady state on a turbine blade which was moved the injected region and receded the stagnation region using a linear cascade apparatus. Axial-type blades were used and the blade chord was 200mm. The rectangular nozzle was applied and its size was $200mm{\times}200mm$. The experiment was done at $3{\times}10^5$ of Reynolds number based on the chord. The surface pressures on the blade were measured at three different nozzle angles of $58^{\circ}$, $65^{\circ}$ and $72^{\circ}$ for off-design performance test. In addition, three different solidities of 1.25, 1.38 and 1.67 were applied. From the results, the low solidity caused the low pressure on the blade suction surface at entering region and the reverse rotating force was generated at the low nozzle angle. The positive incidence also made the pressure lower on the suction surface at entering region.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.143-148
• /
• 2007

An impulse turbine, which is a main component of a liquid rocket engine, needs to be a small size with light weight and generate large power. Since the impulse turbine is being operated under complicated supersonic conditions, flow analysis and performance prediction largely depend on CFD technique. In order to increase the reliability of the prediction code, however, it often requires an experimental data to compare. In this research a rotating turbine rotor with multiple blades is simulated with a two-dimensional stationary cascade to check the effect of major flow parameters. Mach number is measured at nozzle exit by using a pitot tube and the blade thrust was also measured with a load cell. The measured thrust coefficient and the power are compared well with the designed conditions, which proves the design procedures are properly taken.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.197-203
• /
• 1999

The albino plants of tobacco (Nicotiana tobacum L. cv. BY-4) were isolated from seed populations that were induced by heavy-ion ($^{14}N$) beam irradiation to proembryo and the in vitro growth and differentiation have been characterized. The in vitro cultured albino plants showed significant reduction of chlorophyll content and possessed larger number of stomata on both upper and lower epidermis than that of wild-type plants. Stem growth of the mutants remained dwarfed, however, the internode recovered its normal length after GA$_3$ treatment (10.0mg/L) on the MS medium containing sucrose under continuous light. When explants of leaf blades of albino plants were cultured, multiple shoots formed directly on MS medium containing 1.0mg/L of BAP or kinetin and a large number of calli were induced on the MS medium containing 1.0mg/L NAA or 1.0 mg/L 2,4-D. The albino calli regenerated multiple albino plantlets in the MS medium containing 0.1mg/L NAA + 1.0 mg/L BAP. No significant differences between the wild-type and albino plants were detected in the multiple shoot induction, callus formation from the explants and the plantlets regeneration from calli. In addition, albino plants have a similar organogenesis Pattern to that of the wild-type in the media with different combinations of NAA (0 to 5.0mg/L) and BAP (0 to 5.0mg/L) treatment. These results indicate that the albino mutant has the same normal regeneration ability as that of wild-type, although the mutant has lost functions in photosynthesis, such as pigmentation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.229-235
• /
• 1988

Several agronomic characters, feed value, and mineral uptake of two corn hybrids infected by different degrees of rice black-streaked dwarf virus (RBSDV) were studied at the south-eastern part of RBSDV prevalent areas in Korea. Although both hybrids were infected with RBSDV by 100%. culm length of Suweon 19 was more severely reduced than that of Jinjuok and there were positive correlations between culm length and top dry weight of individual plants. The reduced culm length was largely due to the shortened length of upper five internodes in both hybrids and also due to the reduced number of internodes in Jinjuok. As culm length reduced, percent ear-bearing plants, average ear weight, and number of kernels per ear reduced significantly in both hybrids. The kernel weight of Suweon 19 decreased with reduced culm length, but that of Jinjuok was similar among the different culm lengths. However, as culm length decreased, crude protein and fiber in whole plants and N, P, K, Mg in culm ＋ leaf sheath increased, but nitrogen free extract in whole plant decreased. And crude fat in whole plant and N, P, K, Mg concentrations in leaf blades and ear were similar among the culm lengths.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

• Korean Journal of Plant Taxonomy
• /
• v.31 no.4
• /
• pp.321-341
• /
• 2001

Phytoliths of leaf blades of Oryza were studied by light and scanning electron microscopy in order to assign the diagnostic character and taxonomic key for the genus. Some phytoliths such as stomatal apparatus, long-cell and short-cell, existing at the same position on the abaxial side of leaf blade, were intensively investigated because of their various forms documented in a previous study. These characters have value either for testing infrageneric classification or for identifying taxa within the genus. Stomatal phytolith is formed by integration of several kinds of sources, such as the guard and subsidiary cell and the papillae. The stomatal phytolith, characterized by not only the absence and presence of phytolith originated by the papillae developed on the guard and subsidiary cell but also their pattern of arrangement, shows various morphologies, and these features have congruent with the infrageneric classification such as section and/or series. Long-cell phytolith is characterized by the absence/presence, arrangement and morphology of phytoliths originated by the papillae on the cell surface. These features may hardly have any systematic relevance within the genus, but contain some informations for identifying of species. All of short-cell phytoliths found are silica body. They form various shapes like cross, bilobate, saddlelike and trilobate, and these features are consistent with infrageneric classification such as section and/or series. Also, some characters, the absence/presence of band of short cell phytolith within costal strip, the absence/presence of saddlelike phytolith within intercostal strip and the number of band of short cell phytolith within costal strip are various according to taxa, but these features do not fall into infrageneric classification. Some taxonomic keys on the phytoliths of stomatal, long-cell and short-cell were developed by their features, and the agreement between these characters and infrageneric classifications was also discussed.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.29-34
• /
• 2009

The Chrysanthemum zawadskii complex is demarcated from other species by having the white and pink ligulate flowers. Its morphological characters are greatly diversified, so that various classification systems have been suggested. The character of leaf thickness has been mentioned as the characteristic for recognizing some of infra-specific taxa within this complex. In this study, we used longitudinal leaf sections to investigate the leaf thickness and cell number of leaf blades of 13 populations including those of the members of the C. zawadskii complex, as well as 4 populations of the related species of C. boreale and C. indicum. From the result, it was clear that the leaves were thicker in populations of C. boreale, C. indicum and C. zawadskii complex (diminishing in that order), and that the leaves were composed of about 9 cell layers in all populations. Within the C. zawadskii complex, leaf shape and thickness varied among the populations. It was very interesting that the taxa with restricted distribution, like C. zawadskii var. tenuisectum, C. zawadskii var. alpinum, C. zawadskii var. lucidum, and C. zawadskii subsp. coreanum had a thicker leaves than found among widely occurring taxa. From this, leaf thickness is supposed to be an adaptation to the unique habitat of each population.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.198-207
• /
• 2009

Distribution of cavitation bubbles relative to change of the sound speed and attenuation in the water was estimated using acoustic signal from 20 to 300 kHz in two cases that cavitation bubbles exist and do not exist. To study generation and extinction property of cavitation bubble, bubble distribution was estimated in three cases: change of rotation speed (3000-4000 rpm), surface area of blade ($32-98\;mm^2$) and elapsed time (30-120 sec). As a result, the radii of the generated bubbles ranged from 10 to $60{\mu}m$, and bubble radius of $10-20{\mu}m$ and $20-30{\mu}m$ was accounted for 45 and 25% of the total number of cavitation bubbles, respectively. And generation bubble population correlated closely with the rotating speed of the blades but did not correlate with the surface area of blade. It was observed that 80% of total bubble population disappeared within 2 minutes. Finally, acoustic data of bubble distribution was compared with optical data.