• Korean Journal of Child Studies
• /
• v.11 no.2
• /
• pp.5-23
• /
• 1990

The purpose of this study was to investigate the acquisition of number-word systems of young children. Specifically, the acquisition of Korean Number-Words(KNW) was compared with the acquisition of Chinese-derived Number-Words(CNW). The subjects included 120 children aged 2:5 to 5:11. The subjects oral counting using the two number word systems were audiotaped. Two coders transcribed the tapes. The data were analyzed by content analysis with descriptive statistics. The findings of this study showed that the acquisition of KNW began from around age two and the acquisition of CNW from around age three. From then, the acquisition of the two number-word systems was parallel. The acquisition of number-words began from the age of 2 years, increased slowly to the age of 4. and then increased rapidly after the age of 5. Although KNW were acquired earlier than CNW, at around the age of 5 years the acquisition of CNW surpassed the acquisition of KNW. The acquisition of number words consists of four developmental levels: Level I: beginning of acquisition of traditional KNW only Level II: beginning of acquisition of CNW with extension of KNW Level III: parallel extension of the two number-word systems Level IV: superior acquisition of CNW. The major error through all stages in the sequence of number words was the omission of one number-word. Younger children produced errors of omission of one, two or three number-words, whereas older children produced errors of nonstandard number-words and repetition.

• Korean Journal of Cognitive Science
• /
• v.24 no.4
• /
• pp.365-391
• /
• 2013

Negative repetition effect (NRE) refers to the phenomenon that the accuracy of report is impaired when a target was flanked by the same distractor than when by alternative distractor. To probe the nature of NRE, this study introduced attention window(s) indicating the positions where a target might be presented, and non-attention window(s) where a target could not be presented. Attention windows are supposed to help participants detect targets readily. Two among three positions are indicated by attention windows in Exp. 1, and a single large attention window encompassing central two positions among four positions was used in Exp. 2, and either large or small attention window was used depending on the number of target candidates in Exp. 3. In the result of three experiments, NREs were consistently observed when both positions of a target and a distractor were indicated by previous attention windows. However, NREs (including its tendency) and its opposite, PREs were observed when a distractor was presented in the non-attention position, depending on its distance from the target and the size of attention window. It seems that this pattern of repetition effects is hard to be explained by repetition blindness hypothesis (Kanwisher, 1991), positional uncertainty hypothesis (Keren & Boer, 1985), and inhibitory attention capture hypothesis (Kwak et al., 1993). Instead it was proposed that shifting of spatial attention should be considered accordingly with the structure of stimulus display. The promising role of this task was discussed in studying the relation of attention and perception.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1217-1224
• /
• 2010

In many sports games, we would use a coin or the game of scissors-paper-stone to decide which side will begin first. We consider the game of scissors-paper-stone when two teams are composed of N respectively. We continue the game of scissors-paper-stone until the winner of the two team is decided. Using sample spaces and enumerating the elements we calculated the mean number of the game when N = 1, N = 2 and N = 3. In case of N = 1 and N = 2, we simulate the game and find the mean and variance when the repetition number n = 20; 30; 50; 100; 150; 200.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.251-259
• /
• 2014

In this paper, we propose Low Energy Service Discovery (LESD) protocol for common discovery mode of IEEE 802.15.8 Peer Aware Communications (PAC). In order to minimize power consumption, Basic Repetition Block (BRB) is defined. Device is able to select operating mode and synchronize other devices through it. Proposed MAC procedure is Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) based on overhearing technique. Even if device has not been received response signal since transmitted request signal, it is able to discover other devices of same group through the overhearing technique. IEEE 802.15.8 PAC has required that performances of common discovery mode are presented about discovered devices during the simulation time, discovery latency and average power consumption. By considering the number of devices per group and channel environment, two scenarios are evaluated through system level simulation and the simulation results of proposed scheme are compared with CSMA/CA in same simulation conditions. As a result, proposed scheme is able to get high energy efficiency of devices as well as increase the number of discovered devices during simulation time when the longer the number of devices is distributed over a limited area.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.3
• /
• pp.213-230
• /
• 2007

The purpose of this study was to examine the state of infection control provided to members of Korean Dental Hygienists Association. The subjects in this study were dental hygienists who attended a symposium on July 1. 2006. after a survey was conducted, the answer sheets from 489 participants were analyzed, and the findings of the study were as follows: 1. Possession of disinfection room was being(72.7%), and person of infection control was zero(52.9%). Number of sterilizer was one(62.2%). 2. As a repetition choice, type of sterilizer was autoclave(97.9%), UV sterilizer(67.4%) and EO gas sterilizer(21.4%). As a repetition choice, infection materials was ethanol(84.1%). 3. Water tube of unit and chair was using of sterilized water(42.9%). Sterilizing of compressed air was no(69.0%). 4. Re-using of disposal was not using(62.5%), re-using disposal was suction tip(28.2%)(repetition choice) 5. In sterilization of instruments, hand-piece was every using time(28.4%), and reamer-file, bur, mirror, pincette, explorer, hand scaler and ultrasonic scaler were high in every using time. 6. Individual protection was high of using, cleaning of hands before treatment was every treatment(87.0%). Type of soap was liquid type in dental clinic(48.2%), infection soap in dental hospital(41.2%) and solid soap in public health center(50.6%). Answered that they need regular oral health education, and 82.9% respondents answered that they need oral health technicians in school. And 87.8% respondents needed individual oral health education for the benefit of better oral health.

• The Journal of Information Systems
• /
• v.19 no.4
• /
• pp.25-49
• /
• 2010

As companies introduced ERP (Enterprise Resource Planning) systems since the middle of 1990s, the databases of the companies has become centralized and gigantic. The companies are now developing data-mining based applications on those centralized and gigantic databases for knowledge management. Almost of them are using $Pro^*C$/C++, a embedded SQL programming language, and it's because the $Pro^*C$/C++ is independent of platforms and also fast. However, they suffer from difficulties in development and maintenance due to the characteristics of corporate databases which have intrinsically large number of tables and fields. The purpose of this research is to design and implement a methodology which makes it easier to develop and maintain embedded SQL applications based on relational databases. Firstly, this article analyzes the syntax of $Pro^*C$/C++ and addresses the concept of repetition and duplication which causes the difficulties in development and maintenance of corporate information systems. Then, this article suggests a management architecture of source codes and databases in which a preprocessor generates $Pro^*C$/C++ source codes by referring a DB table specification, which would solve the problem of repetition and duplication. Moreover, this article also suggests another architecture of DB administration in which the preprocessor generates DB administration commands by referring the same table specification, which would solve the problem of repetition and duplication again. The preprocessor, named $PrePro^*C$, has been developed under the UNIX command-line prompt environment to preprocess $Pro^*C$/C++ source codes and SQL administration commands, and is under update to be used in another DB interface environment like ODBC and JDBC, too.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.61-72
• /
• 2008

The UV-protection effect of green-tea dyed fabrics was reported in our previous studies. The chitosan was used as a natural mordant of cellulose fiber for green tea extract because chitosan is a natural bio-polymer. The increase in the UV protection property of summer cellulose fabrics, cotton and linen, upon the repetition of chitosan mordanting and green tea dyeing was observed. However, the physical property change would be followed by this repeated wet processing of the cellulose fabric. Therefore, the physical changes of the chitosan mordanted and green tea dyed cotton and linen fabrics were evaluated by KES-FB system. Tensile, shear, bending, compression, and surface characteristics were tested upon the repetition of mordanting and dyeing treatments. Linearity of tensile force increased in the treated cotton and linen samples. Tensile energy and resilience decreased in all treated fabrics. Shear stiffness increased in the treated cotton and linen in general. Shear hysteresis was increased in all cotton samples and some linen samples. In cotton, the bending rigidity in all treated cottons increased except C3G3. As the chitosan mordanting numbers increased, the bending rigidity tended to decrease. In linen, the bending rigidity and hysteresis increased in all treated samples. Compressional energy and resilience increased as the number of chitosan mordanting increased both in cotton and linen. This could be the result of the increase in thickness upon chitosan mordanting. Surface coefficient of friction increased in the treated cotton and linen in general. Surface roughness tended to increase in cotton.

• Journal of Korean Medical classics
• /
• v.11 no.1
• /
• pp.224-307
• /
• 1998

The above study is based upon the Theory of Five Woon(Reasons) and Six Qi(Climates), namely Five dynamic Yin and Yang, the principle of five-six combination, the rules of ten periodically changing Woon and twelve periodically changing Qi, and its reference to the main chapters of the theory by several experts. After careful, comprehensive research and study, the followings are concluded. 1. The Theory of Five Woon and Six Qi controls all of the physical phenomena of the universe, yet it originates from Essence of the Sky that is replete and in constant motion within the abysmal expanse of the universe. So it is natural to claim that it is the Essence of the universe that is the source of the variety of phenomena in nature. 2. There is order of dynamics in the Essence and it is Yin Yang Five Movement and expressed by Five Woon and Six Qi. Therefore the Five Woon and Six Qi, which is the climatic changes of nature, is the basis and condition for all of the natural, physical occurrences including the organic phenomena of human beings. 3. Since the Sky embodied the number Five, and the Earth the number Six, Qi of the Sky itself is consequently Five Woon and Qi of the Earth itself is Six Qi. 4. In Sixty Repetition Intervals (Yuk Sip Kap Ja), the Sky took the number Six, designating the six times repetition of the ten Intervals of the Sky and the Earth chose the number Five, symbolizing five times recurrence of the twelve Intervals of the Earth. Though the number for the Sky is Five and the number for the Earth is Six, the two combine and interact in order for the Sky to exploit the number Six and for the Earth to use the number Five. This interplay implies the relationship of operation and principle of Yin in Yang and Yang in Yin. 5. There seems to be clear and intimate association between five dynamics, five bearings and five Qi' in nature and five organs, five stamina, and five emotions in physiological activities of human beings. Such an correlation apparently demonstrates the idea of climatic changes of the universe in balance among human beings, the Sky, and the Earth. 6. Because nature is of an endlessly dynamic organism itself, to have changes must mear there being movements. Thus the climatic changes in nature are the subsequent consummation of the interaction in mutual balance and unbalance of the rise and fall of the Five Woon and Six Qi. 7. The interpretation, by Chang Ji Chong of "Yin and Yang of the Sky are for birth and growth and Yin and Yang of the Earth for demise and interment" as an explanation that the first half is mainly for life and the second half for death, appears to be correct by his view that there is balance and harmony between the long and short and the strong and weak. 8. In addition to Three Yang and Three Yin, as attributes of the Intervals of the Sky and the twelve Intervals of the Earth, Five Woon and Six Qi are utilized in the annual observation of the perpetual changes of climates.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.75-78
• /
• 1995

This paper presents the feasibility of laser ablation process in 3-D micro machining of MEMS (micro Electro Mechanical System)parts. The micro machining characteristics of polymer(Energy fluence, pulse repetition rate, number of pulse, ablation rate)are investigated and 3-D micro machined samples are demonstrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.127.4-127
• /
• 2001

Inspection and shape measurement of three-dimensional objects are widely needed in industries for quality monitoring and control. A number of visual or optical technologies have been successfully applied to measure three dimensional surfaces. Especially, the shape measurement using an interferometric principle becomes a successful methodology. However, those conventional interferometric methods to measure surface profile have an inherent shortcoming, namely 2∏ ambiguity problem. The problem inevitably happens when the object to be measured has discontinuous shape due to the repetition of interferometric signal with phase period of 2∏. Therefore, in this paper, we choose as a shape measuring method, ...