• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.27-27
• /
• 1999

To illustrate the global variation of the droplet mean diameters and the turbulent flow characteristics in counterflowing internal mixing pneumatic nozzle, the experimental measurements at five axial downstream locations(i.e., at Z=30, 50, 80, 120, and 170mm) were made using a PDPA(Phase Doppler Particle Analyzer) under the different air injection pressures ranging from 40 ㎪ to 120 ㎪. A nozzle with axi-symmetric tangential-drilled four holes at an angle of 15$^{\circ}$ has been designed and manufactured. The distributions of velocities, turbulence intensities, turbulence kinetic energy, turbulent correlation coefficients, spray angle, droplet mean diameters, volume flux, number density are quantitatively analyzed. It is possible to discern the effects of increasing air pressure. It indicates that the strong axial momentum in spite of more or less disparity between the velocity components means more reluctant to disperse radially, and that axial fluctuating velocities are substantially higher than those of radial and tangential ones, suggesting that the disintegration process is enhanced under higher air assist. The larger droplets are detected in the spray centerline at the near stations and smaller ones are generated due to further subsequent breakup at farther axial locations are attributed to the internal mixing type nozzle characteristics. Despite of the strong axial momentum, the poor atomization around the centre close to the nozzle exit is attributed to the lower rates of spherical particles which are not subject to instantaneous breakup. As it goes downstream, however, substantial increases in SMD(Sauter Mean Diameter) from the central part toward spray periphery are understandable because the droplet relative velocity is too low to bring about any subsequent disintegration.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.154-168
• /
• 2021

Various types of wooden relics are being unearthed following the full-scale excavation in Wolseong palace site, Gyeongju in Korea. In particular, a large number of relics were found in the moat surrounding the Wolseong Fortress. This study attempted to secure basic data on the shields of the Silla era through species identification, radiocarbon dating, and shape analysis of the two wooden shields excavated from the Wolseong moat. As a result of the radiocarbon dating, it was confirmed that the shields were made of wood procured in the period between the mid-4th century and the early 5th century. The species identification confirmed that the body of the relic was made with Pinus soft pine group and the handle with Zelkova serrata. It was also confirmed that the excavated wooden shield was made by first marking a thin line on a flat grain board, then marking double concentric circles and perforating small holes. The distance between the division lines is constant at about 6cm, and spaces between them are colored in red and black. The shape analysis estimated that two artifacts were more than 50cm and 36cm in width, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.499-504
• /
• 1991

EPR spectra of the high $T_c$ superconductor $YBa_2Cu_3O_{7-y}$ (YBCO) doped with $Pd^{2+} or Zn^{2+}$ have been measured at several temperatures and dopant concentrations. The spectral intensity of $YBa_2({Cu_{1-x}}{Pd_x})_3O_{7-y}$ is proportional to the dopant concentration. The behavior of $YBa_2(Cu_{1-x}Zn_x)_3O_{7-y}$ is quite different: the spectral intensity remains almost constant up to x=0.10 and then increases rapidly above x=0.10. The results are interpreted in terms of localized and antiferromagnetically spin-paired d holes in both CuO chain and planes. The $Pd_{2+}$ ion substitutes on the CuO chain consisting of "CuOCu dimers", and a $Cu_{2+}$ ion with an unpaired spin is gene rated for each $Pd_{2+}$ ion substituted. On the other hand, $Zn_{2+}$ substitutes on the CuO planes, and all or most of the spins in the two-dimensional plane manage to pair up in the region of low dopant concentration. When the dopant concentration exceeds a certain limit, it becomes more difficult for the spins to find partners, and the number of unpaired spins increases rapidly with increasing dopant concentration. The $Zn_{2+}$ ion is more effective than the $Pd_{2+}$ ion in suppressing the superconductivity of YBCO. This is attributed to the fact that $Zn_{2+}$ substitutes on the CuO planes which are mainly responsible for the superconductivity, while $Pd_{2+}$ substitutes on the CuO chain which is of secondary importance in the superconductivity.

• Steel and Composite Structures
• /
• v.18 no.2
• /
• pp.497-517
• /
• 2015

This study evaluates behavior of the Y-type perfobond rib shear connector proposed by Kim et al. (2013). In addition, an empirical shear resistance formula is developed based on push-out tests. Various types of the proposed Y-type perfobond rib shear connectors are examined to evaluate the effects of design variables such as concrete strength, number of transverse rebars, and thickness of rib. It is verified that higher concrete strength increases shear resistance but decreases ductility. Placing transverse rebars significantly increases both the shear resistance and ductility. As the thickness of the ribs increases, the shear resistance increases but the ductility decreases. The experimental results indicate that a Y-type perfobond rib shear connector has higher shear resistance and ductility than the conventional stud shear connector. The effects of the end bearing resistance, resistance by transverse rebars, concrete dowel resistance by holes, and concrete dowel resistance by Y-shape ribs on the shear resistance are estimated empirically based on the push-out test results and the additional push-out test results by Kim et al. (2013). An empirical shear resistance formula is suggested to estimate the shear resistance of a Y-type perfobond shear connector for design purposes. The newly developed shear resistance formula is in reasonable agreement with the experimental results because the average ratio of measured shear resistance to estimated shear resistance is 1.024.

• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.47-55
• /
• 2014

As increasing number of large-size earthquake around Korean peninsula, many interests have been focused to the earthquake strengthening of existing structures. The brittle fracture of Non-seismic designed columns lead to full collapse of the building. In the past, cross-sectional extension method, a steel plate reinforcing method and fiver-reinforced method are applied to Seismic Rehabilitation Technique mainly. However, the reinforcement methods have drawbacks that induce physical damage to structures, large space, long duration time. So, in this study, performance evaluation of previously developed FRP seismic reinforcement which do not induce physical damage and short duration time was enforced. The specimens were constructed with 80% downscale. FRP seismic reinforcement are manufactured of glass fiber or aluminum plate with holes and glass fiber. From the experiment results, seismic performance of specimens which reinforced with FRP seismic reinforcement were increased.

• Tribology and Lubricants
• /
• v.31 no.5
• /
• pp.221-228
• /
• 2015

It is possible to prevent a piston from contacting the cylinder by changing the shape of the piston or by applying micro-textures, such as micro-grooves or micro-holes, over the piston surface. Usually, the minimum radial clearance reaches its minimum value at the beginning of the suction stroke because the pressure around the piston is low and almost axisymmetric such that the net pressure force on the piston is not sufficiently high to support the piston from touching the cylinder. In this study, we apply a series of saw-tooth-shaped grooves on the piston surface, and numerically investigate the effects of groove depth, groove angle, and the number of grooves with radial clearance variations using a finite difference method. We conduct a dynamic analysis of the piston for various changes in groove geometries to obtain the minimum radial clearance variation for the entire compression cycle. The minimum radial clearance increases while friction loss decreases when we apply the series of saw-tooth-shaped grooves on the piston. In addition, we analyze the impact of the change in the groove shape variable due to changes in radial clearance. Leakage variations are relevant to radial clearance, but have almost no effect on the groove parameters.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.3
• /
• pp.165-171
• /
• 2001

New visible and fast assay system have been developed for tobacco transformant introduced with adenosine deaminase (ADA) marker gene, which converts cytotoxic adenosine analogues to non-toxic inosine analogues and ammonia. Ammonia was changed to blue color in the solution of phenol-nitoprusside and alkaline-hypochlorite. It was possible to detect activity of ADA visibly on the holes of 96 well plate using tiny explant of transgenic tobacco leaves within 1 hour incubation time. As substrates of ADA enzyme from transgenic plant on the plate, a number of adenosine analogues such as 9-D-arabinofuranosyl adenine, cordycepin, 2'-deoxyadenosine, adenosine and xylofuranosyl adenine were possible for detection of ADA activity. Optimal condition of substrate for ADA enzyme was each 10 mM and pH 7.5 in adenosine solution. Especially, transgenic plant did not convert adenosine to inosine and ammonia in the presence of ADA inhibitor deoxycoformycin, which means that ammonia produced from transgenic plant is due to expression of ADA gene. Now, we show that this detection system can be easily, sensitively, fast and cheaply as well as visibly assayed in vitro as GUS gene system with very small size of transformant explant.

• Explosives and Blasting
• /
• v.27 no.2
• /
• pp.1-11
• /
• 2009

Abstract By investigating the stress redistribution caused by the preceding cut blasting when applying the pre-splitting method to tunnel round, an attempt was made to find conditions that were favorable for the propagation of cracks in contour holes. The investigation of the direction of minor principal stress in the numerical analysis revealed that the most significant factor affecting the change of the direction was the loading condition, while the core shape, rock type, and tunnel depth seemed to be less important in determining the direction of minor principal stress. Moreover, the number of cracks tended to increase with the increase of deviatoric stress. Through the model test of pre-splitting, it is confirmed that the pre-splitting method taking the stress field into account can reduce the extent of yield zone and has advantage in controlling the direction of crack than the conventional one.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.705-712
• /
• 2008

Sweet potato starch was modified using Thermus aquaticus $\alpha$-1,4-glucanotransferase ($Ta{\alpha}GT$), and its structural and rheological properties were investigated. $Ta{\alpha}GT$-modified starch had a lower amylose level and molecular weight than raw starch. The chain length distribution showed an increased number of short and long branched chains and the formation of cycloamyloses. Compared with raw starch, $Ta{\alpha}GT$-modified starch displayed a lower gelatinization enthalpy and a wider melting temperature range. The X-ray diffraction of $Ta{\alpha}GT$-modified starch was a weak V-type pattern with distinct sharp peaks at 13 and $20^{\circ}$. Scanning electron micrographs of modified starch exhibited big holes on the surface and the loss of granular structure. The frequency sweep measurement revealed that the gel of $Ta{\alpha}GT$-modified starch was more rigid than raw starch gel. However, the structure of modified starch gel was destroyed by heating at $75^{\circ}C$, and a firm gel was re-formed by subsequent storage at $5^{\circ}C$, indicating thermoreversible property.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.83-89
• /
• 2003

The gas electron multiplier placed in the drift volume of conventional gas detectors, is a conceptually simple device for producing a large gas gain by concentrating the drift electric field over a very short distance to the point that electron avalanching occurs(〉 10$^4$ V/cm), greatly increasing the number of drifting electrons. This device consists of a thin insulating foil of several tens of urn in thickness. covered on each side with a thin metal layer(Cu), with tiny holes, usually 100 ${\mu}{\textrm}{m}$ or less in diameter. and with a spacing of 100-200 ${\mu}{\textrm}{m}$ through the entire foil. perforated by using chemical etching or high-powered laser beam technique In this study, we have investigated its operating properties with various experimental conditions, and demonstrated the possibility of using this device as a digital X-ray imaging sensor, by acquiring X-ray images based on the scintillation properties of the gas electron multiplier with standard CCD camera.