• 대한전기학회논문지
• /
• 제39권7호
• /
• pp.729-739
• /
• 1990

This paper deals with the fault detection problem in uncertain linear/non-linear systems having both undermodelling and noise. A robust fault detection method is presented which accounts for the effects of noise, model mismatch and nonlinearities. The basic idea is to embed the unmodelled dynamics in a stochastic process and to use the nominal model with a predetermined fixed denominator. This allows the input /output relationship to be represented as a linear function of the system parameters and also facilitate the quatification of the effect of noise, model mismatch and linearization errors on parameter estimation by the Bayesian method. Comparisons are made via simulations with traditional fault detection methods which do not account for model mismatch or linearization errors. The new method suggested in this paper is shown to have a marked improvement over traditional methods on a number of simulations, which is a consequence of the fact that the new method explicitly for the effects of undermodelling and linearization errors.

• 설비공학논문집
• /
• 제18권9호
• /
• pp.729-737
• /
• 2006

Air-side forced convective heat transfer of a plate fin-tube heat exchanger is investigated by experimental measurement and numerical computation. The heat exchanger consists of staggered arrangement of refrigerant pipes of 10.2 m diameter and the pitch of fins is 3.5 m. In the experimental study, the forced convective heat transfer is measured at Reynolds number of 1082, 1397, 1486, 1591 and 1649 based on diameter of refrigerant piping and mean velocity. Average Nusselt number for the convective heat transfer coefficient is also computed for the same Reynolds number by commercial software of STAR-CD with standard $k-{\varepsilon}$ turbulent model. It is found that the relative errors of average Nusselt numbers between experimental and numerical data are less than 6 percentage in Reynolds number of $1082{\sim}1649$. The errors between experiment and other correlations are ranged from 7% to 32.4%. But the correlation of Kim at al is closest to the experimental data within 7% of the relative error.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.300-307
• /
• 2002

Damage estimation methods are classified into two groups according to the dependence on the FE model : signal-based and model-based methods. Signal-based damage estimation methods are generally appropriate for detection of damage location, whereas not effective for estimation of damage severities. Model-based damage estimation methods are difficult to apply directly to the structures with a large number of the probable damaged members. It is difficult to obtain the exact model representing the real bridge behavior due to the modeling errors. The modeling errors even may exceed the modal sensitivity on damage. In this study, Model-based damage detection method which can effectively consider the modeling errors is suggested. Two numerical example analyses on a simple beam and a multi-girder bridge are presented to demonstrate the effectiveness of the presented method.

• 품질경영학회지
• /
• 제21권1호
• /
• pp.22-34
• /
• 1993

In claiming for the purchased products, two types of errors can occur from the consumer's point of view. One is to accept defective products and the other one is to reject good products. Due to such errors, Claim rate for the products is expected to be different from that the producer has originally anticipated. In this paper, the probability distribution of the number of claimed products when such consumer's inspection errors are involved is derived. Then, a simple model is provided to estimate the claim rate when such errors are present.

• 대한한방부인과학회지
• /
• 제25권1호
• /
• pp.70-78
• /
• 2012

Objectives: The purpose of this article is not until to investigate the changes and types of statistical methods and to point out the statistical errors after analyzing the method of articles that improve the quality of the statistical analysis of papers published in the Journal of Oriental Obstetrics and Gynecology. Methods: Papers published in the Journal of Oriental Obstetrics and Gynecology from 2009 to 2011 were reviewed for methodological and statistical validity using a modified version of Ahn's checklist. A statistician reviewed individual papers and evaluated the list items in the checklist for each paper. To avoid the potential assessment error by the statistician who lacks expertise in the field of Oriental Obstetrics and Gynecology. Results: A total of 190 papers including 64 original articles, 40 reviews article, 58 case report and 28 brief communication were reviewed. Statistics methods used in 121 papers were composed of t-test(58.7%), ANOVA test(19.8%) and ${\chi}^2$- test (14.0%) et al. Whereas only 14.9% of papers were free of statistical errors, the number of omission errors was 58 and the number of commission errors was 149 each. Conclusions: A variety of statistical errors were encountered in papers published in the Journal of Oriental Obstetrics and Gynecology. Accordingly, researchers should be more careful when it comes to describing and applying statistical methods.

• 약학회지
• /
• 제54권6호
• /
• pp.507-521
• /
• 2010

Training for asthma patients by professionals has been highly emphasized for patients' self-management. In the present study, three standardized training sessions targeting hospital pharmacists were performed. On the basis of the number of training sessions taken, a non-educated group (CG), an once-educated group (NG), and a twice more-educated group (IG) were allocated. The most frequent errors of using an inhalant were shaking before the use in MDI while taking breathe out before inhaling in the case of DPI, and the total average number of errors were the biggest for CG and the smallest in IG. On comparison in the number of the four symptoms of asthma according to the level of seriousness, it was revealed that the total average number was the biggest in CG and the smallest in IG. In the level of awareness regarding the contents of training for patients, patients over 50 tended to answer that they were aware of education contents, and particularly in mouth rinsing and the use before/after a meal, significant similarity was examined. Regular asthma patient training performed by hospital pharmacists appeared to reduce errors in the inhaler usage, increase the quality of life of an patient, and help a patient remember the contents of the training. Especially among patients over 50, it was found to be more effective and retraining of more than two sessions was requisite.

• 한국초등수학교육학회지
• /
• 제12권1호
• /
• pp.1-25
• /
• 2008

최근 더욱 강조되는 교사의 교수 내용 지식과 관련하여 분수에 관한 연구는 상대적으로 많으나 소수와 관련된 연구는 매우 드물다. 초등수학교육에서 소수가 차지하는 양과 개념적 중요성을 생각해볼 때, 이에 대한 연구가 시급하다. 이에 본 연구는 예비초등교사의 소수연산에 관한 수학 내용 지식, 학생 이해 지식, 교수 방법 지식을 살펴보았다. 분석 결과, 예비교사들은 교과서에 제시된 연산 방법에 관해서는 잘 이해하고 있었으나 승수나 제수가 소수인 경우 연산의 의미는 잘 이해하지 못했다. 학생들의 오류에 대해서는 자연수 관련 오류에 비해 소수점 관련 오류, 분수 관련 오류를 잘 이해하지 못하였다. 교수 방법에 대해서는 알고리즘에 관한 설명이 가장 많았으며, 응답 중 '자연수 연산과 비슷하게 계산하되 소수점에 유의한다.'와 같은 반응이 많아 학생들의 자연수 관련 오류의 원인이 될 가능성을 보였다. 이런 측면에서 본 연구는 예비초등교사교육에서 초등학생들의 오류 유형 및 원인에 대해 더 민감하게 배우고 단순한 알고리즘 이외의 다양한 교수법에 대해서 학습할 기회가 필요하다는 점을 강조한다.

• 융합신호처리학회논문지
• /
• 제14권4호
• /
• pp.249-254
• /
• 2013

아날로그 신호를 입력받아서 실시간으로 처리하기 위해서는 빠른 곱셈 연산회로와 고속 ADC(A/D converter) 회로가 필요하며 이를 위하여 Double-base Number System(DBNS)이 효과적인 것으로 알려져 있다. DBNS는 2와 3을 밑수로 이용하는 시스템으로서 이진 곱셈기와 비교할 때 곱셈 처리가 매우 빠르며, 칩 면적을 감소시킬 수 있으며, 저소비전력의 장점을 갖고 있다. 그러나 DBNS의 고유특성 때문에 변환오차가 발생하며, 디지털 필터의 구조로 인하여 오차가 연산결과에 누적되어 기존에 사용하던 2진수 방식에 비하여 차단 주파수의 S/N 특성이 저하되는 단점이 있다. 본 논문에서는 필터 계수에 대한 오차를 분석하여 ADC의 엔코더를 비선형으로 설계함으로써 DBNS의 누적오차를 상쇄시키는 방법을 제안하였다. 제안된 시스템은 엔코더 회로만이 수정되었으므로 DBNS의 장점은 그대로 유지된다. 제안한 ADC 엔코더가 비선형임에도 불구하고 -70dB의 차단 주파수 특성을 갖도록 설계한 FIR 필터와 비교하면, 기존의 DBNS 엔코더의 결과는 -35dB를 얻을 수 있었지만, 본 연구에서 제안된 비선형 DBNS 엔코더는 -45dB의 S/N로 -10dB의 향상을 이룰 수 있었다.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2640-2652
• /
• 1994

The stiffness of 6-node isotropic element is stiffer than that of 8-node isotropic element of same configuration. This phenomenon was called 'Relative Stiffness Stiffening Phenomenon'. In this paper, an equation of sampling point modification which correct this phenomenon was derived for the composite plate, as well as an equation for an isotropic plate. The relative stiffness stiffening phenomena of an isotropic plate element could be corrected by modifying Gauss sampling points in the numerical integration of stiffness matrix. This technique could also be successfully applied to the static analyses of composite plate modeled by the 3-dimensional 16-node elements. We predicted theoretical errors of stiffness versus the number of layers that result from the reduction of numerical integration order. These errors coincide very well with the actual errors of stiffness. Therefore, we can choose full integration of reduced integration based upon the permissible error criterion and the number of layers by using the thoretically predicted error.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권2호
• /
• pp.9-13
• /
• 2019

The paper aims to investigate the performance of domestic Saudi Arabian ETFs. ETFs are investment vehicles in vogue. These instruments were the first levers for investors allowing them to enter some markets that have been highly protected or out of reach. Saudi Arabia, which has been promoted as an emerging country by MSCI, seeks to attract more foreign investors. The first ETFs were launched in the years 2010-2011. Even though their number has not increased since then, there is a desire to attract a large number of investors. We use premiums/discounts analysis, standard risk-return models, and tracking errors measurements to assess how closely their replicate the underlying benchmark based on monthly data. The results indicate that out of the three funds investigated two are slightly traded at premium, while the latter exhibit a price discount. However, tracking errors are at minimum for all funds suggesting that they track well the benchmark index. Further, the Jensen's model shows that alphas are negative or null, and betas capture largely the systematic risk which is consistent with index investing strategies. Finally, traditional risk-adjusted measures of performance are used to compare ETFs, and results exhibit negative ratios showing that portfolios achieve lower return than the risk-free rate.