• Title/Summary/Keyword: Number line

Search Result 3,219, Processing Time 0.031 seconds

The Visualization of the Flowfield through Tube Banks with In-line and Staggered Arrangements Using the PIV (PIV를 이용한 정렬 및 엇갈림 배열을 가진 관군을 지나는 유동장의 가시화)

  • Ro, Ki-Deok;Park, Ji-Tae;Byun, Yong-Sue
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.33 no.1
    • /
    • pp.44-51
    • /
    • 2009
  • The Characteristics of the flowfield through tube banks with in-line and staggered arrangements were investigated by PIV. Strouhal numbers, velocity vectors and velocity profiles around the cylinders with in-line and staggered arrangements were observed at the pitch ratio Pt/D=2.0 and Reynolds number of Re=$Re=4.0{\times}10^3$. As the results The flow patterns through tube banks were almost a straight line in case of the in-line arrangement while it was almost 八 type in case of the staggered arrangement in the direction of the wake. The average velocity in the rear region of the tube banks with the staggered arrangement was far smaller than that with the in-line arrangement. The Strouhal number in the last rank was far smaller than that in the front ranks in both of the in-line and staggered arrangements. The wake of each cylinder changed with time and with the position of the cylinder.

A study on the effect of the condition number in the magnetic field mapping of the Air-Core solenoid

  • Huang, Li;Lee, Sangjin
    • Progress in Superconductivity and Cryogenics
    • /
    • v.17 no.2
    • /
    • pp.31-35
    • /
    • 2015
  • Mapping is a useful tool in the magnetic field analysis and design. In some specific research area, such as the nuclear magnetic resonance (NMR) or the magnetic resonance imaging (MRI), it is important to map the magnetic field in the interesting space with high accuracy. In this paper, an indirect mapping method in the center volume of an air-core solenoid is presented, based on the solution of the Laplace's equation for the field. Through the mathematical analysis on the mapping calculation, we know that the condition number of the matrix, generated by the measurement points, can greatly affect the error of mapping result. Two different arrangement methods of the measurement points in field mapping are described in this paper: helical cylindrical line (HCL) method and parallel cylindrical line (PCL) method. According to the condition number, the HCL method is recommended to measure the field components using one probe. As a simple example, we mapped the magnetic fields in a MRI main magnet system. Comparing the results in the different methods, it is feasible and convenient to apply the condition number to reduce the error in the field mapping calculation. Finally, some guidelines were presented for the magnetic field mapping in the center volume of the air-core solenoid.

On-line token control of fieldbus for effective data service (효과적 데이터처리를 위한 필드버스의 온라인 토큰제어)

  • 이석원;남부희
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1997.10a
    • /
    • pp.680-683
    • /
    • 1997
  • Fieldbus system should be designed by considering the number of sensors/actors(actuators+ controllers) and their sampling times. But the number of sensors/actors and which are connected to the network bus can be varied by addition and/or fault of the field devices. That variation decreases the efficiency of system which is off-line designed optimally. This paper proposes an algorithm that ensures transmission of cyclic data even though there is the number change in the field devices. We assign the different weight values to cyclic data and acyclic data. By simulation and experiment, the cyclic and acyclic data are processed via the proposed network, and the results are compared with those of the Profibus system. It is shown that the proposed algorithm is more robust with the uncertainties of the field devices of the control system.

  • PDF

Simulation of Efficient FlowControl for Photolithography Process Manufacturing of Semiconductor

  • Han, Young-Shin;Lee, Chilgee
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 2001.10a
    • /
    • pp.269-273
    • /
    • 2001
  • Semiconductor wafer fabrication is a business of high capital investment and fast changing nature. To be competitive, the production in a fab needs to be effectively planned and scheduled starting from the ramping up phase, so that the business goals such as on-time delivery, high output volume and effective use of capital intensive equipment can be achieved. In this paper, we propose Stand Alone layout and In-Line layout are analyzed and compared while varying number of device variable changes. The comparison is performed through simulation using ProSys; a window 98 based discrete system simulation software, as a tool for comparing performance of two proposed layouts. The comparison demonstrates that when the number of device variable change is small, In-Line layout is more efficient in terms of production quantity. However, as the number of device variable change is more than 14 titles, Stand Alone layout prevails over In-Line layout.

  • PDF

A Data-line Sharing Method for Lower Cost and Lower Power in TFT-LCDs

  • Park, Haeng-Won;Moon, Seung-Hwan;Kang, Nam-Soo;Lee, Sung-Yung;Park, Jin-Hyuk;Kim, Sang-Soo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2005.07a
    • /
    • pp.531-534
    • /
    • 2005
  • This paper presents a new data line sharing technique for TFT-LCD panels. This technique reduces the number of data driver IC's to half by having two adjacent pixels share the same data line. This in turn doubles the number of gate lines, which are integrated directly on the glass substrate of amorphous silicon for further cost reduction and more compactness. The proposed technique with new pixel array structure was applied to 15.4 inch WXGA TFT-LCD panels and has proven that the number of driver IC's were halved with nearly 41% circuit cost reduction and 5.3% reduction in power consumption without degrading the image quality.

  • PDF

KTX Impact on Train Operation Pattern ; An Empirical Analysis (KTX 개통후 서울~천안구간의 열차운행패턴 분석)

  • Lee Jin-Sun;Kim Kyoung-Tae
    • Journal of the Korean Society for Railway
    • /
    • v.8 no.6 s.31
    • /
    • pp.507-512
    • /
    • 2005
  • Railroad transportation system has experienced major changes due to KTX introduction. Kyungbu corridor especially Seoul to Cheonan has line capacity problem and its solution has been a primary concern to researchers and policy decision makers. This study explored pattern of train operation between Seoul and Cheonan after the introduction of KTX in 2004. Both the number of trains and available seat capacity per day have increased but maximum number of trains per specific hour has not been changed much. Demand for train shows that if concentrated in a specific time, so number of trains during the peak hour should be increased. But, it is difficult ? 새 line capacity, so increasing seat capacity per train might be an option. An increase in an avaliable sear should be considered the characteristics of each train lines.

Chromosome Variation in Suspension Cells Derived from Cultured Immature Embryo of Triticum spp. (밀(Triticum spp.)의 미성숙배로부터의 유도한 현탁 배양세포에서의 염색체 변이)

  • 방재욱
    • Journal of Plant Biology
    • /
    • v.33 no.3
    • /
    • pp.189-196
    • /
    • 1990
  • Suspension cell lines have been newly established from the calli derived from the immuature embryo culture of hexapolid (Triticum aestivum var. sicco), tetrapolid (T. durum) and diploid (T. tauchii or Aegilops squarrosa) wheat species. The chromosomal variation in suspension cultured cell lines was examined and old cell line, C82d, established from T. aestivum var. copain was also used. New method using 1-bromonaphthalene for metaphase rapping of suspension cells was developed. Variation in chromosome number was observed among all the suspension lines. Cells with doubled chromosome number and deleted chromosome were also observed. Extensive structural changes in chromosome were found in C82d line. Chromosome aberrations showed loss of chromosome arms and chromosome segment. The mean chromosome number in suspension cells of T. aestivum var. sicco was 40, in C82d line 33, in T. durum 28 and in T. tauchii 14. The stability of chromosome in suspension cells of diploid and tetrapolid wheats was higher than that of hexaploid wheat.

  • PDF

Analysis of Magnetic Fields Induced by Line Currents using Coupling of FEM and Analytical Solution (선전류에 의해 발생되는 자장의 해석을 위한 유한요소법과 해석해의 결합 기법)

  • Kim, Young-Sun;Cho, Dae-Hoon;Lee, Ki-Sik
    • The Transactions of the Korean Institute of Electrical Engineers P
    • /
    • v.55 no.3
    • /
    • pp.141-145
    • /
    • 2006
  • The line current problem(2-dimensional space : point source) is not easy to analyze the magnetic field using the standard finite element method(FEM), such as overhead trolley line or transmission line. To supplement such a defect this paper is proposed the coupling scheme of analytical solution and FEM. In analysis of the magnetic field using the standard FEM. If the current region is a relatively small compared to the whole region. Therefore the current region must be finely divided using a large number of elements. And the large number of elements increase the number of unknown variables and the use of computer memories. In this paper, an analytical solution is suggested to supplement this weak points. When source is line current and the part of interest is far from line current, the analytical solution can be coupling with FEM at the boundary. Analytical solution can be described by the multiplication of two functions. One is power function of radius, the other is a trigonometric function of angle in the cylindrical coordinate system. There are integral constants of two types which can be established by fourier series expansion. Also fourier series is represented as the factor to apply the continuity of the magnetic vector potential and magnetic field intensity with tangential component at the boundary. To verify the proposed algorithm, we chose simplified model existing magnetic material in FE region. The results are compared with standard FE solution. And it is good agreed by increasing harmonic order.

Comparison of Some Methodologies for Vegetation Analysis in Transplanted Rice (이앙답에서 몇가지 식생분석방법들의 비교)

  • Kim, Soon-Chul;Keith Moody
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.28 no.3
    • /
    • pp.310-318
    • /
    • 1983
  • Four methods of vegetation analysis were compared to determine the most suitable method to use in transplanted rice. The highest number of weed species, 14 was obtained with the list quadrat method while the least number, 8 was obtained with the line intercept method. The clip quadrat method tended to overestimate weed species with a low moisture content such as Sagittaria trifolia L. and Ludwigia prostrata Roxb while for the list quadrat method, weed species with a high moisture content such as Sagittaria pygmaea Miq. and Monochoria vaginalis (Burm. f) Pres 1 were overestimated. With the line intercept method, weed species having conspicuous leaf blades such as S. trifolia and Potamogeton distinctus Benn. were dominant. Of the methods tested, the line intercept method was the least desirable because it accounted for the least number of weed species. Any of the others could be use for vegetation analysis without any significant problems arising. However, preference was given to the point quadrat method because of the ease of measurement. It was also less tedious and less time consuming than the other methods.

  • PDF

MATCHINGS IN LINE GRAPHS

  • Nam, Yun-Sun
    • Bulletin of the Korean Mathematical Society
    • /
    • v.37 no.1
    • /
    • pp.121-125
    • /
    • 2000
  • In this paper, we obtain an algorithm for finding a maximum matching in the line graph L(G) of a graph G. The complexity of our algorithm is O($$\mid$E$\mid$$), where is the edge set of G($$\mid$E$\mid$$ is equal to the number of vertices in L(G)).

  • PDF